Instruction Manual

Spirit II User’s Manual Section 4: Operation with Automatic Gas Console
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
4-11
Altering Important Parameters
With the RS422 Parameter Control set
to Manual, certain values on the
Parameters Screen can be changed
manually. Press the corresponding
data entry button and enter the desired
value.
Once a value has been changed, press
the Manual Transmit button
to send the
value to the X/Y machine or torch
height control.
Saving Customized Settings
If one of the default cutting or marking parameters was altered, the new configuration
can be saved for later use.
Press the Manage Custom Setups
button on the Parameters Screen.
Press the Save button and enter a
name using the on-screen keyboard.
This name is added to the list of
existing custom setup files and can be
accessed again by scrolling through
the list using the left (Prev) or right
(Next) arrow buttons.