Specification

[ 4 ] | Vantage
®
300
QUALITY AND RELIABILITY
• Simple wire harnessing keeps connections to a minimum for greater
reliability. Lead and harness strain reliefs on all control connections help
ensure trouble-free performance.
• Engine protection system includes automatic shutdown for low oil
pressure or high engine temperature.
• Indicator light turns on for low oil pressure or high engine temperature.
A second indicator light turns on if the engine battery charging system
malfunctions.
• Circuit breaker protection on the battery ignition system provides added
component protection.
• Environmental friendly engine! The engine has a closed breather
system to keep the engine compartment and ground clean. This system
eliminates oil mist from collecting inside the engine compartment,
especially on surfaces that would lower engine cooling efficiency.
• Self-bleeding engine simplifies startup if your fuel tank runs dry.
• Kubota
®
engine camshaft is gear-driven. No timing
belt maintenance.
• Printed circuit boards are environmentally-
shielded using Lincoln Electric’s engineered
potting and protective frame trays.
• Dependability and long life are aided by
all-copper windings in rotor and stator
with high quality insulation.
• Standard stainless steel roof, side panels and engine-access door
deliver added protection, durability and corrosion-resistance. Eliminates
the need to paint or replace rusting panels.
• Manufactured under a quality system certified to ISO 9001 requirements
and ISO 14001 environmental standards.
• Canadian Standards Association (CSA) certified.
• Three-year Lincoln Electric warranty (engine is warranted separately by
the manufacturer - see Engine Specifications, footnote 6).
MACHINE SPECIFICATIONS
Product
Name
Ordering
Information Description
Rated DC Output
(1)
Current/Voltage/Duty
Cycle
CV Rated Output
(1)
Current/Voltage/Duty Cycle
AC
Power
(3)(4)
Dimensions
H x W x L
inches (mm)
Weight
lbs.(kg)
Vantage
®
300 K2409-4 300 Amp DC Welder with
Engine Gauges
12,500 Watts Peak
11,000 Watts
Continuous AC Power
3-Phase
11,500 Watts Peak
10,000 Watts
Continuous AC Power
1-Phase
DC Constant Current
300A/32V/100%
350A/28V/100%
30-400 Amps
DC Pipe Current
300A/32V/100%
40-300A
Touch Start TIG
®
Range
250A/30V/100%
20-250 Amps
Arc Gouge
300A/32V/100%
90-300A
Single Dial
Continuous Control
60V DC Max OCV
@1890 RPM
DC Constant Voltage
(2)
300A/32V/100%
350A/28V/100%
14-32V
Single Dial
Continuous Control
Wire Feeder Power
120V/60 Hz
42V/60 Hz
12,500 Peak
Watts, 60 Hz
Two 120V Duplex
Receptacles w/
Sealed GFCI
Modules
20A Per Duplex
40A Total
(5)
1-Phase Full
KVA Receptacle
42A@240V
42A@120V Each
Branch Circuit
(5)
3-Phase
Full KVA
Receptacle
27A@240V
35.9 x 25.3 x 60.0
(913 x 642 x 1524)
To top of exhaust tube:
44.3 (1124)
1035 lbs.
(469 kg)
ENGINE SPECIFICATIONS
Engine
Model Description
Horsepower &
Displacement Capacities
Operating
Speeds
Fuel
Consumption
Kubota
®
V1505
(6)
EPA Tier 4
4 Cylinder, 4 Cycle
Water-Cooled Diesel Engine,
12V Electric Start,
Dry Type Air Cleaner,
Fuel Filter with Water Separator
22 HP @ 1800 RPM
91 cu in
(1.5 ltrs)
FUEL:
20 gals (76 ltrs)
OIL:
6.4 qts (6.0 ltrs)
RADIATOR COOLANT:
7.2 qts (6.8 ltrs)
300A Load
1800 RPM
High Idle
1890 RPM
Low Idle
1350 RPM
1.2 Gal/Hr
4.4 Ltr/Hr
0.4 Gal/Hr
1.5 Ltr/Hr
0.3 Gal/Hr
1.1 Ltr/Hr
(1)
High Altitude: For maximum rating, derate the output 2.5% to 3.5% for every 1,000 ft. (300 m). High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C)
above 104°F (40°C).
(2)
DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.
(3)
When welding, available AC generator power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.
(4)
120V will operate either 60 Hz or 50/60 Hz power tools, lights, etc.
(5)
Circuits cannot be wired in parallel to operate the same device.
(6)
Kubota
®
warranty is 2 years/2,000 hours for machines shipped within the U.S., Canada, Pacific Ocean region and Western Europe. Warranty is 1 year/1,000 hours for Central
and South America, Asia, Africa and Middle East.