Specification

Vantage
®
300 | [ 7 ]
WIRE FEEDER OPTIONS
LN-25 Ironworker
™
Wire Feeder
Portable CV unit for flux-cored and
MIG welding with MAXTRAC
®
wire
drive system. Includes digital meters
for wire feed speed/amperage
and voltage, gas solenoid, internal
contactor and 5/64 in. (2.0 mm)
drive roll kit for cored wire. Has 83%
reduced wire feed speed capability
for 6 o’clock pipe welding with
Innershield
®
wire.
Order K2614-9
K126 PRO Innershield
®
Gun
For self-shielded wire with 15 ft.
(4.5 m) cable. For .062-5/64 in.
(1.6-2.0 mm) wire. Includes
K466-10 Connector Kit.
Order K126-12
Drive Roll and Guide Tube Kit
For .068-.072 in. (1.7-1.8 mm)
cored or solid steel wire.
Order KP1697-068
Magnum
®
PRO 350 Ready-Pak
®
15 ft., .035-5/64 in.
Magnum
®
PRO MIG/flux-cored
welding guns are rated 100%
duty cycle. The guns are designed
for high amperage, high duty
cycle applications in extreme
environments where heat-resistance
and fast serviceability are key.
Order K2652-2-10-45
Drive Roll and Guide Tube Kit
For .035 in. and .045 in.
(0.9-1.1 mm) solid steel wire.
Order KP1696-1
Magnum
®
SG Spool Gun
Hand held semiautomatic wire
feeder. Requires SG Control Module
and Input Cable.
Order K487-25
SG Control Module
The interface between the power
source and the spool gun. Provides
control of the wire speed and gas
flow. For use with a spool gun.
Order K488
Input Cable
(For SG Control Module)
For Lincoln Electric engine power
sources with 14-pin MS-type
connection, separate 115V NEMA
receptacles and output stud
connections.
Order K691-10
PLASMA CUTTING
Tomahawk
®
1000
Cuts metal using the AC generator
power from the engine-driven
welder. Requires the T12153-9
Full-KVA Power Plug (1-Phase).
Order K2808-1
RECOMMENDED ACCESSORIES