- LINDY Manual Access Switch Lite

4.2 Logging In

4.2.1 Login to the IP ACCESS SWITCH LITE

Launch your web browser. Direct it to the address of your IP ACCESS SWITCH LITE which you

configured during the installation process. The address used might be a plain IP address or a

host and domain name if you have given your IP ACCESS SWITCH LITE switch a symbolic

name in the DNS.

Example: Type the following in the address line of your browser when establishing an

unsecured connection:

http://<IP address of IP ACCESS SWITCH LITE>

When using a secure connection, type in:

https://<IP address of IP ACCESS SWITCH LITE>

This will lead you to the IP ACCESS SWITCH LITE login page as shown below:

The IP ACCESS SWITCH LITE has a built-in super user account that has all the permissions

enabled to administrate your IP ACCESS SWITCH LITE switch:

Password pass (factory default)

Please note: Your web browser has to accept cookies, or else login is not possible.

Note: The user “super” is not allowed to login via the serial interface of the IP-KVM switch.

Please make sure you change the super user password immediately after you have installed

and accessed your IP ACCESS SWITCH LITE for the first time. Not changing the password for

the super user is a severe security risk and could result in unauthorized access to the switch

and to the host system(s) to which it is connected.