USB 2.0 Video & Audio Grabber User Manual English LINDY No. 42960 www.lindy.
Introduction Thank you for purchasing the LINDY USB 2.0 Video & Audio Grabber. The USB 2.0 Video & Audio Grabber allows you to connect your camcorder or VCR to your computer to transfer audio and full motion video for storage, backup, copying and editing. With the supplied GrabBee video grabber application and Presto! Video editing software suite you’ll be able to create professional looking results which you can copy to CD or DVD, or e-mail to family and friends.
Product Information S-Video input Audio inputs Left (white) Right (red) USB 2.0 connector Composite video input (yellow) USB 2.0 connector: Connects directly to a USB 2.0 port on your computer. This product is not designed for use with the USB 1.1 interface nor should you connect it to a non-powered USB 2.0 hub Audio inputs (Windows XP users only): Connects to the left & right audio outputs from your external device (e.g.
Device Installation Note: You must install the driver software BEFORE connecting the Video & Audio Grabber to your PC! 1. Insert the Multimedia Installation Kit CD into your CD/DVD drive. Launch the following setup program: E:\GrabBeeX+deluxe\Driver\Setup.exe (assuming ‘E’ is your CD/DVD drive) 2. The InstallShield Wizard will launch. Follow the on-screen instructions to install the driver. When driver installation is complete you will be asked to restart your computer.
GrabBee Software Installation 1. Insert the Multimedia Installation Kit CD into your CD/DVD drive. Launch the following setup program: E:\GrabBeeX+deluxe\AP Software\Setup.exe (assuming ‘E’ is your CD/DVD drive) 2. The InstallShield Wizard will launch. Follow the on-screen instructions to install the software. 3.
Using the GrabBee Application After you have launched the GrabBee application, the Preview Window & Controls will appear: Preview Window Move the cursor into the preview window and right-click. The function menu will appear. You can select the desired preview resolution here, change the window to full screen mode, and set it to always be the top window.
Controls Snapshot Volume Album Playback Stop Record Option Colour Setting Video Input Mute Pause Slide Bar Video Input: switches between Composite and S-Video input Slide Bar: you can drag this bar to move backwards and forwards during playback Colour Setting: allows adjustment of brightness, contrast, hue and saturation Mute: switches the volume on/off Pause: pauses playback Record: click this button to start recording.
Snapshot: click this button to take a snapshot. A new window will appear previewing each snapshot as it is taken. You can double-click on a picture to see it in full size. The buttons at the bottom allow you to save or delete the files.
Troubleshooting The Video Grabber is not detected by my PC! If present, ensure any USB 2.0 settings are enabled in your PC’s BIOS Make sure your system has the latest USB 2.
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products United Kingdom In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways.
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.