Network Router User Manual

7
Chapter 3: Getting to Know the Wireless-G Access Point
The LEDs
Wireless-G Access Point with Power Over Ethernet and Rangebooster
Chapter 3: Getting to Know the Wireless-G Access Point
The LEDs
The Access Point's LEDs, where information about network activity is displayed, are located on the front panel.
Power Green. The Power LED lights up when the Access Point is powered on.
PoE Green. The PoE LED lights up when the Access Point is powered through Ethernet cable.
WIRELESS Green. The WIRELESS LED lights up when the wireless module is active on the Access Point. If
the Wireless LED is flashing, the Access Point is actively sending to or receiving data from a
wireless device.
ETHERNET Green. The ETHERNET LED lights up when the Access Point is successfully connected to a
device through the Ethernet network port. If the ETHERNET LED is flashing, the Access Point is
actively sending to or receiving data from one of the devices over the Ethernet network port.
Figure 3-1: Front Panel