Linksys E-Series Routers User Guide
Linksys E-Series E1200 E1500 E2500 E3200 E4200
Linksys E-Series E1200/E1500 Contents E1200/E1500 Contents Product overview Setting Up: Advanced E1200/E1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package contents Features Back view Bottom view 1 1 2 2 Setting Up: Basics How to create a home network . . . . . . . . . . . . . . . . . . . . 10 What is a network? How to set up a home network 10 10 Where to find more help . . . . . . . . . . . . . . . . .
Linksys E-Series How to connect a device manually E1200/E1500 Contents 38 How to control access to your wireless network . . . . . . . . . . 39 How to improve security using the built-in firewall 40 Port Forwarding and Port Triggering How to set up port forwarding . . . . . . . . . . . . . . . . . . . .
Linksys E-Series E2500 Contents E2500 Contents Product overview Setting Up: Advanced E2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package contents Features Back view Bottom view 3 3 4 4 How to create a home network . . . . . . . . . . . . . . . . . . . . 10 10 10 Where to find more help . . . . . . . . . . . . . . . . . . . . . . . . 10 How to set up your router . . . . . . . .
Linksys E-Series Connecting a device using the Wi-Fi Protected Setup button How to connect a device using its Wi-Fi Protected Setup PIN How to connect a device using the router’s Wi-Fi Protected Setup PIN How to connect a device manually E2500 Contents 37 38 38 38 How to control access to your wireless network . . . . . . . . . . 39 How to improve security using the built-in firewall 40 Port Forwarding and Port Triggering How to set up port forwarding . . . . . . . . . . . . . .
Linksys E-Series E3200 Contents E3200 Contents Product overview Setting Up: Advanced E3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package contents Features Back view Bottom view 5 5 6 6 How to create a home network . . . . . . . . . . . . . . . . . . . . 10 10 10 Where to find more help . . . . . . . . . . . . . . . . . . . . . . . . 10 How to set up your router . . . . . . . .
Linksys E-Series Connecting a device using the Wi-Fi Protected Setup button How to connect a device using its Wi-Fi Protected Setup PIN How to connect a device using the router’s Wi-Fi Protected Setup PIN How to connect a device manually E3200 Contents 37 38 38 38 How to control access to your wireless network . . . . . . . . . .
Linksys E-Series E4200 Contents E4200 Contents Product overview Setting Up: Advanced E4200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package contents Features Top view Back view 7 7 8 8 How to create a home network . . . . . . . . . . . . . . . . . . . . 10 10 10 Where to find more help . . . . . . . . . . . . . . . . . . . . . . . . 10 How to set up your router . . . . . . . . .
Linksys E-Series Connecting a device using the Wi-Fi Protected Setup button How to connect a device using its Wi-Fi Protected Setup PIN How to connect a device using the router’s Wi-Fi Protected Setup PIN How to connect a device manually E4200 Contents 37 38 38 38 How to control access to your wireless network . . . . . . . . . .
Linksys E-Series Product overview Product overview Features Wireless-N technology E1200/E1500 Built with leading 802.11n wireless technology, your router offers maximum speed and range to create an ultra-powerful network designed for home theater performance. Connect your computers, Internet-ready TVs, game consoles, smartphones and other Wi-Fi devices at blazingly fast transfer rates for an unrivaled experience.
Linksys E-Series Product overview Back view Port activity indicator Green network activity indicator Power port Ethernet ports Internet port Power indicator Wi-Fi Protected Setup button •• Ethernet ports—Connect Ethernet cables (also called network cables) to these Fast Ethernet (10/100) ports, color coded blue, and to other wired Ethernet network devices on your network.
Linksys E-Series E2500 Product overview Features Wireless-N technology Built with leading 802.11n wireless technology, your router offers maximum speed and range to create an ultra-powerful network designed for home theater performance. Connect your computers, Internet-ready TVs, game consoles, smartphones and other Wi-Fi devices at blazingly fast transfer rates for an unrivaled experience. The power of dual band Double your network bandwidth with simultaneous dual-band N (2.4 and 5 GHz).
Linksys E-Series Product overview Back view Port activity indicator Green network activity indicator Power port Internet port Ethernet ports Network and Internet port Power indicator Wi-Fi Protected Setup button •• Ethernet ports—Connect Ethernet cables (also called network cables) to these Fast Ethernet (10/100) ports, color coded blue, and to other wired Ethernet network devices on your network.
Linksys E-Series E3200 Product overview The power of dual band Double your network bandwidth with simultaneous dual-band N (2.4 and 5 GHz). The dual-band feature is designed to avoid interference and optimize throughput for smoother and faster HD video streaming, file transfers, and wireless gaming. SpeedBoost Higher quality antenna technology helps maintain high speeds across greater distances throughout your home.
Linksys E-Series Product overview Back view Port activity indicators Yellow network activity indicator Green network activity indicator Network or Internet port Power port USB port Internet port Ethernet ports Power indicator •• Green network activity indicator—On Ethernet ports, turns on when a cable connects the port to another Gigabit Ethernet port. On the Internet port, turns on while connected to a modem. •• Yellow activity indicator—Flashes to indicate network activity over that port.
Linksys E-Series E4200 Product overview The power of dual band Double your network bandwidth with simultaneous dual-band N (2.4 and 5 GHz). The dual-band feature is designed to avoid interference and optimize throughput for smoother and faster HD video streaming, file transfers, and wireless gaming. SpeedBoost Higher quality antenna technology helps maintain high speeds across greater distances throughout your home.
Linksys E-Series Product overview Back view Easy to manage Cisco Connect software helps you customize your settings and quickly add multiple devices to your network: Separate guest network Create a separate, secure, password-protected network for guests. Parental controls Ethernet ports Limit access time and websites with parental controls.
Linksys E-Series Product overview Port activity indicators Yellow network activity indicator Green network activity indicator Network or Internet port •• Green network activity indicator—On Ethernet ports, turns on when a cable connects the port to another Gigabit Ethernet port. On the Internet port, turns on while connected to a modem. •• Yellow network activity indicator—Flashes to indicate network activity over that port.
Linksys E-Series Setting Up: Basics Setting Up: Basics How to create a home network 2. Make sure that your modem is working. Your ISP can help you set up your modem and verify that it’s working correctly. 3. Set up your router. See “How to set up your router” on page 10. What is a network? A network is any group of devices that can communicate with each other. A home network can also include Internet access, which requires a router like this one.
Linksys E-Series Setting Up: Basics How to start Cisco Connect To start Cisco Connect on a Windows computer: When you run the setup CD, Cisco Connect (your router’s setup software) is automatically installed onto your computer. You can then use Cisco Connect to easily manage your router. To install Cisco Connect on another computer after your router has been set up, see “How to install Cisco Connect on another computer” on page 12. 1. Click Start, All Programs, then click Cisco Connect.
Linksys E-Series How to install Cisco Connect on another computer Although Cisco Connect is installed onto your computer when you run the setup CD, you may want to manage your router from a different computer on your network. CAUTION After your router has been set up, do not run the setup CD to install Cisco Connect to another computer. If you run the setup CD again, you will be prompted to enter the router’s network name (SSID) and password.
Linksys E-Series How to connect devices to your network Setting Up: Basics 2. Click Computer. How to connect a computer to your network You can connect a computer to your network using an Easy Setup Key (the easiest way) or manually. How to connect a computer using an Easy Setup Key To use an Easy Setup Key, you first need to create one using any available USB drive. After it has been created, you can use the same key to connect several computers to your network.
Linksys E-Series Setting Up: Basics To use your Easy Setup Key to connect a computer to your network: To manually connect a computer to your network: 1. Run Cisco Connect, then click Add device under Computers and devices. The Computers and other devices screen opens. 1. Run Cisco Connect, then click Add device under Computers and devices. The Computers and other devices screen opens. 2. Click Computer. 2. Click Computer. 3. Select Yes, I have an Easy Setup Key, then click Next.
Linksys E-Series How to connect a printer When you install a printer that requires a cable, follow the printer’s instructions for setting it up, then follow your computer’s operating system instructions to share the printer with your network. When you set up a wireless printer, however, it needs to communicate with your router. Before you try to set up your wireless printer, make sure that: •• Your printer has been completely set up except for being connected to the network.
Linksys E-Series 3. Write down the Network name (SSID), Security Key, and Security Type information, or click Print these settings if you have a printer attached. Setting Up: Basics How to set up parental controls With your router, you can use parental controls to: •• Set the times that Internet access is allowed. •• Block websites based on their content. •• Block websites that you specify. •• Set the above restrictions for specific computers.
Linksys E-Series 2. Enter a password (from 4 to 32 characters), then enter a secret question and answer. •• The password must contain from 4 to 32 valid characters, which are A-Z, a-z, and 0-9. Setting Up: Basics To change the parental controls password: 1. In the Parental controls main screen, click Change parental controls password, then follow the on-screen instructions. •• The answer to the secret question should be something not easily guessed by others.
Linksys E-Series How to select the computers to have parental controls It’s not necessary to set parental controls over each computer on your home network. You can set the controls on only those computers that children can access. Setting Up: Basics How to set parental controls 1. In the Parental controls main screen, click the computer name to set parental controls for. 2. Under Block Internet access, specify when the computer’s Internet access will be blocked: •• Never does not block Internet access.
Linksys E-Series Setting Up: Basics How to set up guest access to your network To set up guest access to your network: 1. Run Cisco Connect, then click Change under Guest Access. The Guest Access screen opens. You can use your router’s guest access feature to provide your guests with access to the Internet, while restricting their access to other resources on your local network. The guest network is shown as an open, unsecure wireless network that your guests can easily connect to.
Linksys E-Series 4. In the Total guests allowed drop-down box, select the number of simultaneous guest network users you want to allow. 5. Click Finish to apply your changes. TIP The first time your guest tries to access the Internet through a web browser, they will see the Guest access screen. To continue, they must enter the password you provided in the Password field, then click LOGIN.
Linksys E-Series Setting Up: Advanced Setting Up: Advanced How to open the browser-based utility To access some advanced settings, you need to open the browser-based utility. To open the browser-based utility: 2. Enter the user name and password, then click OK. The utility’s main menu opens. TIP If you set up your router without using Cisco Connect, your router’s default password is admin. (You can leave the user name blank.) 1.
Linksys E-Series 4. Open a web browser on the computer and open the address 192.168.1.1. A login window appears. Setting Up: Advanced 3. In the Internet Connection Type drop-down list, click the type of Internet connection provided by your ISP. TIP For field descriptions, click Help on the right side of the screen. 5. Enter the default password (admin). (You can leave the user name blank.) The browser-based utility opens to the main menu. 6.
Linksys E-Series Upgrade your wireless clients If you have network adapters that support only legacy wireless network standards such as 802.11b, you should consider upgrading them with Wireless-N (802.11n) network adapters. Wireless-B (802.11b) devices can slow your entire wireless network. For the best performance, all of your wireless devices should support Wireless-N. You can then select Wireless-N Only as your Network Mode below.
Linksys E-Series b. Network Name (SSID) – Provide a unique SSID for your 5 GHz wireless network. The name must not exceed 32 keyboard characters. In the example above, the 5 GHz wireless network was renamed BronzeEagle5GHz. c. Channel Width – We recommend that you keep the default (Auto) settings.
Linksys E-Series Setting Up: Advanced How to set up DHCP reservation How to find your network on the Internet Why would I use it? DHCP reservation allows you to assign a unique, fixed IP address to a specific device on your network. Assigning a fixed IP address is a good way to manage devices such as print servers, web cameras, network printers, and game consoles.
Linksys E-Series 5. Complete the fields with information provided by your DDNS provider, then click Save Settings. The Status field tells you what actions have been taken. In this example, the domain name registered with TZO.com is BronzeEagle953.linksysnet.com.
Linksys E-Series How to connect to your corporate office using a VPN What is a VPN, and do I need to change my router settings? A VPN (Virtual Private Network) is a network that uses a public network, such as the Internet, to provide secure communications between a remote computer and another network. Corporations often provide VPN access to their networks to enable employees to work from remote offices or while traveling.
Linksys E-Series To configure QOS: Applications & Gaming > QoS 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 21). 2. Click the Applications & Gaming tab, then click the QoS page. Setting Up: Advanced TIP Do not set all priorities to High, because all items will have the same priority, and it would be easier to disable Internet Access Priority for the same result. •• Applications and Online Games—Let you assign a priority for an application or online game.
Linksys E-Series 7. Configure Upstream Bandwidth. •• To allow the router to detect the maximum, select Auto (default). Auto sets speeds in multiples of 512 Kbps. Setting Up: Advanced 8. Click Save Settings at the bottom of the screen to accept your changes. •• To specify the maximum, select Manual, then select the bandwidth you want it to use. CAUTION If you specify a maximum bandwidth that is too high, the router cannot apply priorities correctly, and QoS problems may result. 8.
Linksys E-Series How to enable Voice over IP on your network Do I need to configure Voice over IP? VoIP (Voice over Internet Protocol) is a technology for using the Internet as an interface for telephone communications. To use VoIP, you need to get an account with a VoIP service provider. The VoIP service provider typically provides you with a telephone adapter (TA) that connects to your network. If you do not use your network to make phone calls, you don’t need to change the default settings.
Linksys E-Series You need to take note of your new router’s settings, then apply some of those settings to the old router so it can work as an access point. To view your new router’s settings: Wireless > Basic Wireless Settings Wireless > Wireless Security Status > Wireless Network Setup > Basic Setup 1. Make sure that your new router is connected to the Internet. 2. In the browser-based utility, click the Wireless tab, then click the Basic Wireless Settings page and take note of the Network Name (SSID). 3.
Linksys E-Series How to put your new router behind an existing router Why would I put my new router behind an existing router? There are several possible scenarios in which you might want to use your new router “behind” another router: 1. You might be in an environment that shares the landlord’s Internet connection with all tenants.
Linksys E-Series Setting Up: Advanced To determine the address range by using a Mac computer: a. Connect your computer into your upstream network’s router. b. From the Dock, click System preferences, click Network, then click Ethernet in the window to the left. A network status window appears. c. Take note of the IP address. In this example, the IP address is 192.168.100.139. Example: The above examples show that upstream IP addresses are on the 192.168.100.0 network.
Linksys E-Series 3. Complete the Static DNS fields with the information provided by your content filtering provider. 4. Click Save Settings. To extend your network This topic covers cases three and four above. NOTE This is a complex process, so this procedure assumes that you have some networking knowledge. To extend your network or add wireless capabilities: 1. If you want to extend your network, you may also follow the instructions above.
Linksys E-Series 7. Click Save Settings to apply your changes. Setting Up: Advanced d. Click Select next to the device that you want to place in the DMZ. In this example, the first device was selected. The corresponding MAC address was copied into the MAC Address field as shown below. e. Click Save Settings to apply your changes. TIP The DHCP Client Table is only available if you select MAC Address.
Linksys E-Series Improving Security Improving Security How do I know if my network is secure? If you configured your router using Cisco Connect, your network is secure. During setup, Cisco Connect creates a name for your network, enables industrystandard WPA/WPA2 wireless security, and assigns a highly secure password for your wireless network and the administrator’s account. To confirm that your network is secure: 1. Run Cisco Connect.
Linksys E-Series To manually set your router’s wireless security settings: Wireless > Wireless Security 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 21). 2. Click the Wireless tab, then click the Wireless Security page. 3. Select your preferred security type from the Security Mode drop-down list For most home networks, we recommend WPA2/WPA Mixed Mode. 4. Enter a passphrase (security key) for your wireless network in the Passphrase field.
Linksys E-Series How to connect a device using its Wi-Fi Protected Setup PIN Improving Security 4. On the client device, enter the PIN listed on the router’s Wi-Fi Protected Setup screen. It is also listed on the bottom of the router. In the example below, the router’s PIN is 32744781. Use this method if your device has a Wi-Fi Protected Setup PIN (Personal Identification Number). To connect a device using the device’s Wi-Fi Protected Setup PIN: Wireless > Basic Wireless Settings 1.
Linksys E-Series How to control access to your wireless network Why would I need to control access to my wireless network? If you used Cisco Connect to configure your router, your wireless network is already secure. By default, Cisco Connect enables industry-standard WPA (Wi-Fi Protected Access) security using WPA2/WPA mixed mode. Cisco Connect configures your network with a complex, 10-character password that is almost impossible to compromise.
Linksys E-Series 7. Click Save Settings at the bottom of the page. 8. Click Wireless Client List again to check the updated device list. Only the device you selected remains on the network. Improving Security •• Filter Multicast—Multicasting allows a single transmission to simultaneously reach specific recipients within your local network. Select this option to block multicasting. This option is disabled by default.
Linksys E-Series Using an External Drive Using an External Drive How to configure storage For E3200, E4200 Why would I need to configure storage? By default, when you connect a storage device to your router, the entire contents of the device are available for read and write access to anyone on your local network (no login credentials are required). However, you can also create shared folders that you can configure to share only with specified groups.
Linksys E-Series 4. If you want to share the entire partition, select Share Entire Partition, then click Save Settings at the bottom of the screen. Using an External Drive c. Click Save Settings at the bottom of the screen, then repeat the above steps to add more folders that you want to share. - OR – If you want to share a specific folder: a. Enter a unique name in the Display Name field. b. Click Select next to the folder name you want to share. •• To open a subfolder, click Enter into Folder.
Linksys E-Series How to disable anonymous disk access Using an External Drive 3. Under Group Management, click Create New Group. By default, no password is needed for read and write access to the drive. Before you can manage group and user access to shared folders, you must disable anonymous disk access. To disable anonymous disk access: Storage > Administration 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 21). 2.
Linksys E-Series How to create a new user Two user accounts (Admin and Guest) are preconfigured for router access. The password for the Admin user is the same password that you use to access the router. By default, the user Admin is a member of the group named Admin, and the user Guest is a member of the group named Guest. To keep it simple, consider creating user accounts on your router that use the same user names and passwords that are used by your computer’s operating system. Using an External Drive 6.
Linksys E-Series 4. In the Shared Folder section, click Edit next to the shared folder you want to change group access for. Using an External Drive How to configure your router’s storage for remote access For E3200, E4200 5. To grant a group access the shared folder, click the group’s name in the Available Groups column, then click >> to move the group to the Groups with Access column. 6.
Linksys E-Series 3. Next to FTP Server, click Enabled. Using an External Drive How to share folders and set access rights You can select which folders to share. You can also select which users can access the folders. For more information on managing access rights, see “How to configure storage” on page 41. To configure FTP and control folder access: Storage > FTP Server 1. In the Storage tab’s FTP Server page, click Specify Folder.
Linksys E-Series 6. To apply your changes and enable FTP access, click Save Settings. Using an External Drive How to access files remotely For E3200, E4200 To access files remotely, you must first attach a USB drive to your router and set up that storage for remote access. For instructions, see “How to configure your router’s storage for remote access” on page 45. You can then access files from anywhere on the Internet. To access files remotely: 1. Make sure that your router is configured to share files.
Linksys E-Series FTP software and web browsers display FTP content in many ways, but you can usually use these common actions to navigate through FTP folders: •• Click a folder name to open it. •• Click a double period (..) or Up to a higher level directory to open a parent folder. •• Click or right-click a file to download or view it. •• Drag a file from another window and drop it into the FTP window to upload it. (To upload a file, your user account must have write access.) Using an External Drive 3.
Linksys E-Series 8. To create a folder, enter a unique folder name into the New Folder box, then click Create. Using an External Drive How to connect your UPnP device to the media server After you set up your router’s media server, you need to connect an UPnPcompatible device (such as an UPnP-compatible game console or digital media player) to the network so that you can play the media server’s content. To connect an UPnP device to your router’s media server: 1.
Linksys E-Series Port Forwarding and Port Triggering Port Forwarding and Port Triggering How to set up port forwarding 3. Click the Applications & Gaming tab, then click the Single Port Forwarding page. Why would I use port forwarding? Port forwarding is a feature that forwards inbound traffic from the Internet on a specific port or ports to a specific device or port on your local network.
Linksys E-Series How to set up port forwarding for multiple ports Port Forwarding and Port Triggering 8. Select Enabled next to the IP Address field. Why would I set up port forwarding for multiple ports? Port forwarding is a feature that forwards inbound traffic from the Internet on a specific port to a single device on your local network. Unlike a web camera that typically only requires a single port to be forwarded, some applications require forwarding of multiple ports.
Linksys E-Series To set up port range forwarding: Applications & Gaming > Port Range Forwarding 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 21). 2. Set up a DHCP reservation for the IP address of the computer on which you installed the software. (See “How to set up the DHCP server on your router” on page 24). In this example, the IP address of the desktop computer with BitTorrent installed is 192.168.1.140. 3.
Linksys E-Series How to configure your Xbox for online gaming Port Forwarding and Port Triggering 4. Enter the port and protocol information as shown in the image below. Why would I set up my Xbox for online gaming? Online gaming adds another dimension to using your Xbox. As with other online gaming applications and gaming consoles, you need to forward multiple ports to use your Xbox for online gaming.
Linksys E-Series Maintaining and Monitoring Maintaining and Monitoring How to back up and restore your router configuration Why do I need to back up my router configuration? As with any valuable data, you should back up your router configuration. Your router might contain many customized settings. Those settings would be lost if you reset your router to its factory defaults, and you would need to re-enter all of them manually. If you back up your router configuration, restoring settings is easy.
Linksys E-Series Maintaining and Monitoring To reset your router to factory defaults with the reset button: 3. Click Restore Factory Defaults. 1. With your router connected to power and turned on, press and hold the Reset button on the bottom of your router for 5-10 seconds. A confirmation window opens. 4. Click OK.
Linksys E-Series Maintaining and Monitoring To upgrade the router’s firmware: Linksys.com/support Administration > Firmware Upgrade 7. In the browser-based utility, click the Administration tab, then click the Firmware Upgrade page. 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 21). 9. Select the upgrade file, then click Start Upgrade and follow the onscreen instructions. The upgrade process begins, and a progress bar appears.
Linksys E-Series To check your router status using the browser-based utility: Status > Router Status > Local Network Status > Wireless Network Status > Ports 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 21). 2. Click the Status tab, then click the Router page. Detailed information about your router status is displayed. Maintaining and Monitoring 4. Click DHCP Client Table to display the currently assigned IP addresses. 5.
Linksys E-Series The Cisco Connect main menu opens. 2. Under Router Settings, click Change. 3. Under Port lights, click Off, then click Finish. Maintaining and Monitoring How to test your Internet connection What utilities are included in my router to test my Internet connection? Your router includes two diagnostic tests, Ping and Traceroute, that let you check network connections, including network devices and your Internet connection. To diagnose your Internet connection: Administration > Diagnostics 1.
Linksys E-Series A window opens showing the ping test results. You will see a response for each successful ping. Maintaining and Monitoring A window opens with the test results. NOTE If an Internet URL fails to respond to ping, it doesn’t necessarily mean that the site is down. For security reasons, some sites are configured to not respond to ping requests. How to configure and use logs 4.
Linksys E-Series Maintaining and Monitoring 5. Select the log you want to see from the Type drop-down list. •• Incoming Log—The source IP addresses and destination port numbers for incoming Internet traffic •• Outgoing Log—Local IP addresses, destination URLs/IP addresses, and service/port numbers for outgoing Internet traffic •• Security Log—Logins for the browser-based utility •• DHCP Client Log—Local DHCP server status information 6. To save the log, click Save the Log, then click OK or Save.
Linksys Browser-based Utility Menu Structure Browser-based Utility Menu Structure E1200/E1500 Security Language Internet Setup Internet Connection Type Optional Settings Network Setup Router Address DHCP Server Setting VPN Passthrough VPN Passthrough Access Policy Parental Controls Target Devices Schedule Block Specific Sites Time Settings Time Zone Reboot DDNS DDNS Applications & Gaming Single Port Forwarding Single Port Forwarding DDNS Service MAC Address Clone MAC Address Clone Wireles
Linksys Browser-based Utility Menu Structure E2500 Security Administration Firewall Setup Basic Setup Language Internet Setup Internet Connection Type Optional Settings Network Setup Router Address DHCP Server Setting VPN Passthrough VPN Passthrough Access Policy Parental Controls Target Devices Schedule Block Specific Sites Time Settings Time Zone Reboot DDNS DDNS Applications & Gaming Single Port Forwarding Single Port Forwarding DDNS Service MAC Address Clone MAC Address Clone Wirel
Linksys Browser-based Utility Menu Structure E3200 Storage Administration Disk Management Disk Management Setup Basic Setup Language Internet Setup Internet Connection Type Optional Settings Network Setup Router Address DHCP Server Setting Time Settings FTP Server Setup Access Administration Information Anonymous Access User Management Group Management Time Zone Reboot DDNS DDNS Service MAC Address Clone Advanced Routing NAT Dynamic Routing (RIP) Static Routing Access Policy Parental C
Linksys Browser-based Utility Menu Structure E4200 Storage Administration Disk Management Disk Management Setup Basic Setup Language Internet Setup Internet Connection Type Optional Settings Network Setup Router Address DHCP Server Setting Time Settings Time Zone Reboot DDNS DDNS Service MAC Address Clone Advanced Routing NAT Dynamic Routing (RIP) Static Routing Media Server UPnP Media Server Setup Database FTP Server Setup Access Administration Information Anonymous Access User Manageme
Linksys E1200 Specifications Specifications Linksys E1200 Environmental Dimensions 7.43” × 5.97” × 1.23” (188.7 × 151.7 × 31.2 mm) Unit Weight 8.91 oz. (252.7g) Power 12V, 0.5A Certifications FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Operating Temp. 32 to 104°F (0 to 40°C) Storage Temp.
Linksys E1500 Specifications Linksys E1500 Environmental Dimensions 7.43” × 5.97” × 1.23” (188.7 × 151.7 × 31.2 mm) Unit Weight 8.96 oz. (254.1g) Power 12V, 0.5A Certifications FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2, WMM, Wi-Fi Protected Setup, Windows 7 Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Operating Temp. 32 to 104°F (0 to 40°C) Storage Temp.
Linksys E2500 Specifications Linksys E2500 Environmental Model Name Linksys E2500 Description Advanced Dual-Band N Router Model Number E2500 # of Antennas 4 total, 2 internal antennas per each 2.4 GHz & 5 GHz radio band Detachable (y/n) No Modulation 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM Receive Sensitivity (Typical) 2.4 GHz 802.11b: -87 dBm @ 11 Mbps 802.11g: -70 dBm @ 54 Mbps 802.11n 20 MHz: -70 dBm @ MCS15 802.
Linksys E3200 Specifications Linksys E3200 Storage File System Support FAT, and NTFS, and HFS+ Model Name Linksys E3200 Environmental Description High Performance Dual-Band N Router Dimensions Model Number E3200 6.69” x 0.98” x 7.48” (170 x 25 x 190 mm) # of Antennas 6 total, 3 internal antennas per each 2.4 GHz & 5 GHz radio band Unit Weight 7.
Linksys E4200 Specifications Linksys E4200 Supported File Systems for Storage Device FAT32, NTFS, and HSF+ Model Name Linksys E4200 UPnP Supported Description Maximum Performance Wireless-N Router Security Features WEP, WPA, WPA2 Model Number E4200 Security Key Bits Up to 128-bit encryption Standards 802.11n, 802.11a, 802.11g, 802.11b, 802.3, 802.3u, 802.3ab Environmental Radio Frequency 2.4 and 5 GHz Dimensions Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) 8.86” x 0.
Visit linksys.com/support for award-winning 24/7 technical support Cisco, the Cisco logo, Flip, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. All other trademarks mentioned in this document are the property of their respective owners. © 2011 Cisco and/or its affiliates. All rights reserved.