Operation Manual

12
Configuration Using the Console Interface
8-Port 10/100/1000 Gigabit Switch with Webview
Chapter 4
SSH Crypto Key Generation
SSH Keys Fingerprints
On the SSH Keys Fingerprints screen, the RSA and DSA keys
will be displayed if they have been generated.
Select Refresh to update the screen if necessary. To exit,
select Quit and press the Enter key.
SSH Keys Fingerprints
User & Password Settings
From this screen, you can administer the user names and
passwords of those accessing the Switch.
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.
User & Password Settings
NOTE: The Username & Password Settings screen
can also be used to set passwords for other
users.
Security Settings
The Security Settings screen enables you to configure
security settings on the Switch, as well as generate and
display the certificate.
Security Settings
SSL Certificate Generation
Use the Certificate Generation screen to specify a device-
generated certificate.
The following fields are specified:
Public Key Length Specifies the SSL RSA key length.
(Range: 512 - 2048)
Organization Name Specifies the organization name.
(Range: 1 - 64)
Locality or City Name Specifies the location or city name.
(Range: 1 - 64)
State or Province Name Specifies the state or province
name. (Range: 1 - 64)
Country Name Specifies the country name. (Range:
2 - 2)
Validity Term Specifies number of days certification is
valid. (Range: 30 - 3650)