Operation Manual

14
Configuration Using the Console Interface
8-Port 10/100/1000 Gigabit Switch with Webview
Chapter 4
HTTP
HTTPS Configuration
Use the HTTPS Configuration screen to configure HTTPS
settings. You can enable or disable the HTTPS server and
configure the port on which the session is enabled.
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.
HTTPS
Nework Configuration
The Network Configuration screen offers a choice of two
tests, Ping and TraceRoute.
Network Configuration
Ping
The Ping screen displays the IP address of the location you
want to contact.
Select Edit to change the IP address, and select Execute
to begin the ping test.
After the ping test is complete, the Ping screen displays
the IP address, status, and statistics of the ping test.
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.
Traceroute
The TraceRoute screen displays the IP address of the
address whose route you want to trace.
Select Edit to change the IP address, and select Execute
to begin the traceroute test.
After the traceroute test is complete, the TraceRoute
screen displays the IP address, status, and statistics of the
traceroute test.
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.