Operation Manual

3
Product Overview
8-Port 10/100/1000 Gigabit Switch with Webview
Chapter 2
miniGBIC1/2 The mini-GBIC (gigabit interface
converter) port is a connection point for a
mini-GBIC expansion module, so the Switch
can be uplinked via fiber to another switch.
Each MiniGBIC port provides a link to a
high-speed network segment or individual
workstation at speeds of up to 1000Mbps.
Use the Linksys MGBT1, MGBSX1, or MGBLH1
mini-GBIC modules with the Switch. The
MGBSX1 and the MGBLH1 require fiber cabling
with LC connectors, while the MGBT1 requires
a Category 5e Ethernet cable with an RJ-45
connector.
Console The Console port is where you can
connect a serial cable to a PC’s serial port for
configuration using your PC’s HyperTerminal
program. Refer to Chapter 4: Using the
Console Interface for Configuration for more
information.
Back Panel
The console and power ports are located on the back
panel of the Switch.
Back Panel
POWER The Power port is where you will
connect the AC power.