Safety data sheet

Safety data sheet according to Regulation (EC) No 1907/2006, Annex II
Revision date / version: 13.08.2015 / 0011
Replacing version dated / version: 22.05.2015 / 0010
Valid from: 13.08.2015
PDF print date: 13.08.2015
Motorbike Chain Lube 250 mL
Art.: 1508
Workers / employees Human - inhalation Long term, systemic
effects
DNEL 3000 mg/m3
Consumer Human - dermal Long term, systemic
effects
DNEL 214 mg/kg
bw/day
Consumer Human - inhalation Long term, systemic
effects
DNEL 643 mg/m3
Consumer Human - oral Long term, systemic
effects
DNEL 214 mg/kg
bw/day
Environment - water PNEC 0,23 mg/l
Environment - sediment PNEC 1,2 mg/kg
Environment - soil PNEC 0,55 mg/kg
Environment - sewage
treatment plant
DNEL 3,6 mg/l
Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, < 5% n-hexane
Area of application Exposure route /
Environmental
compartment
Effect on health Descriptor Value Unit Note
Workers / employees Human - dermal Long term, systemic
effects
DNEL 300 mg/kg
bw/day
Workers / employees Human - inhalation Long term, systemic
effects
DNEL 2035 mg/m3
Consumer Human - dermal Long term, systemic
effects
DNEL 149 mg/kg
bw/day
Consumer Human - inhalation Long term, systemic
effects
DNEL 608 mg/m3
Consumer Human - oral Long term, systemic
effects
DNEL 699 mg/kg
bw/day
Workers / employees Human - dermal Long term, systemic
effects
DNEL 773 mg/kg
bw/day
8.2 Exposure controls
8.2.1 Appropriate engineering controls
Ensure good ventilation. This can be achieved by local suction or general air extraction.
If this is insufficient to maintain the concentration under the WEL or AGW values, suitable breathing protection should be worn.
Applies only if maximum permissible exposure values are listed here.
8.2.2 Individual protection measures, such as personal protective equipment
General hygiene measures for the handling of chemicals are applicable.
Wash hands before breaks and at end of work.
Keep away from food, drink and animal feedingstuffs.
Remove contaminated clothing and protective equipment before entering areas in which food is consumed.
Eye/face protection:
Tight fitting protective goggles with side protection (EN 166).
Skin protection - Hand protection:
Solvent resistant protective gloves (EN 374).
If applicable
Protective nitrile gloves (EN 374)
Minimum layer thickness in mm:
>= 0,3
Permeation time (penetration time) in minutes:
< 480
The breakthrough times determined in accordance with EN 374 Part 3 were not obtained under practical conditions.
The recommended maximum wearing time is 50% of breakthrough time.
Protective hand cream recommended.
Skin protection - Other:
Protective working garments (e.g. safety shoes EN ISO 20345, long-sleeved protective working garments).
Respiratory protection:
Page 6 of 16