Photocoupler Product Data Sheet MOC3020 THRU MOC3023 SERIES Spec No.: DS-70-99-0019 Effective Date: 05/23/2014 Revision: G LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.
Photocouplers MOC3020 THRU MOC3023 SERIES 1. DESCRIPTION 1.1 Features 6 Pin DIP photocoupler, Triac driver output High input-output isolation voltage Viso = 5,000Vrms High repetitive peak off-state voltage VDRM: Min. 400 V. High critical rate of rise of off-state voltage dV/dt: Min.
Photocouplers MOC3020 THRU MOC3023 SERIES 2. PACKAGE DIMENSIONS 2.1 MOC3020, MOC3021, MOC3022, MOC3023 : 2.2 MOC3020M, MOC3021M, MOC3022M, MOC3023M : Notes : 1. Year date code. 2. 2-digit work week. 3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ). 4. Model No.
Photocouplers MOC3020 THRU MOC3023 SERIES 2.3 MOC3020S, MOC3021S, MOC3022S, MOC3023S : Notes : 1. 2. 3. 4. Year date code. 2-digit work week. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ). Model No.
Photocouplers MOC3020 THRU MOC3023 SERIES 3. TAPING DIMENSIONS 3.1 MOC3020S-TA, MOC3021S-TA, MOC3022S-TA, MOC3023S-TA : 3.2 MOC3020S-TA1, MOC3021S-TA1, MOC3022S-TA1, MOC3023S-TA1 : Description Symbol Dimension in mm (inch) Tape wide W 16±0.3 (0.63) Pitch of sprocket holes P0 4±0.1 (0.15) Distance of compartment Distance of compartment to compartment F 7.5±0.1 (0.295) P2 2±0.1 (0.079) P1 12±0.1 (0.
Photocouplers MOC3020 THRU MOC3023 SERIES 4. RATING AND CHARACTERISTICS 4.
Photocouplers MOC3020 THRU MOC3023 SERIES 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage VF — 1.15 1.5 V IF=20mA Reverse Current IR — — 10 A VR=6V IDRM — 10 100 nA VDRM = 400V Peak On-State Voltage, Either Direction VTM — 1.
Photocouplers MOC3020 THRU MOC3023 SERIES 5. CHARACTERISTICS CURVES F ig .1 F o rw a rd C u rre n t vs. F ig .2 O n -sta te C u rre n t vs. A m b ie n t A m b ie n t T e m p e ra tu re T e m p e ra tu re 50 ITM , o n-state c urrent (A) Fo rw ard c urrent I F (m A) 60 40 30 20 10 0 -40 -20 0 20 40 60 0.10 0.05 0 -40 -20 80 100 120 o 0 20 40 60 80 100 120 o Am b ient tem p erature Ta ( C ) Am b ient tem p erature Ta ( C ) F ig .3 M in im u m T rig g e r C u rre n t F ig .
Photocouplers MOC3020 THRU MOC3023 SERIES 8/11 Part No : MOC3020 THRU MOC3023 SERIES BNC-OD-C131/A4
Photocouplers MOC3020 THRU MOC3023 SERIES 6. TEMPERATURE PROFILE OF SOLDERING 6.1 IR Reflow soldering (JEDEC-STD-020C compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times.
Photocouplers MOC3020 THRU MOC3023 SERIES 6.2 Wave soldering (JEDEC22A111 compliant) One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5˚C Time: 10 sec. Preheat temperature:25 to 140˚C Preheat time: 30 to 80 sec. 6.3 Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5˚C Time: 3 sec max.
Photocouplers MOC3020 THRU MOC3023 SERIES 7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit: mm 8. NAMING RULE MOC302X(1)-(2) DEVICE PART NUMBER (1)= FORM TYPE (S, M or none) (2)= TAPING TYPE (TA, TA1 or none) 9. Notes: LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without further notices.