Compatibility Chart

FML4W
Low Profile
LED Wraparound
LINEAR LED
FEATURES & SPECIFICATIONS
INTENDED USE
The FML4W wide housing LED wrap was designed with the renovator in mind. While compatible with
new construction, it’s no mystery the flexibility of the FML4W will keep renovation simple. A wider
housing easily covers up existing blemishes from older fixtures, while the option to adjust lumens
grants the perfect amount of light to any room. This is capped off by two dimming options; standard
0-10v dimming and for easy install, triac dimming. Triac dimming is connected straight through line
voltage for easy dimming compatibility, especially in renovation or retrofit projects.
All this means the FML4W shines in closets, foyers, hallways, laundry rooms, bedrooms, offices, utility
work areas, and more.
CONSTRUCTION
The LED wrap is constructed of a metal housing with decorative plastic end caps. The white
polycarbonate diffuser provides even illumination and softens the appearance of the LEDs for a uniform
appearance from below the ceiling.
OPTICS
Triac Dimming (TD): Wrap is 5,000 lumens at 120V only.
ALO6: Wraps are switchable between 4,000, 5,000, and 6,000 lumens (MVOLT).
ZT: Wraps produce 5,000 lumens (MVOLT).
All versions are rated for 60,000 hours life.
Thermal formed diffuser is of highly transmissive material to minimize lamp image and provides high-
angle brightness control. One piece contemporary design wrap around diffuser soften appearance for
improved aesthetics.
ELECTRICAL
Long-life LEDs, coupled with a high-efficiency driver, provide extended service life. FML4W is rated
to deliver L85 performance at 60,000 hours. Fixture operates at 120 OR 120/277 volts, 60Hz. ZT MVOLT
(120/277v) version has 0-10V dimming driver, dims to 10%. Triac Dimming (120V) allows dimming of the
fixture through line voltage. Fixture mounts to recessed junction box, electrical connections must be made
inside junction box.
LISTINGS
CSA certified to US and Canadian standards. Listed for damp locations.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.
Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions
are qualified
WARRANTY
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/customer-support/terms-and-conditions
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
Catalog
Number
Notes
Type
Replacement parts
RK3FML4W LENS White polycarbonate diffuser
Specifications
Width: 10 (25.4)
Length: 47 7/8 (121.6)
Depth: 3 (7.62)
Weight: 6.6 lb 2.99kg
All dimensions are inches (centimeters) unless otherwise indicated.
COMMERCIAL INDOOR FML4W
Looking for Contractor Select readily available
configurations? Click here to visit Contractor Select™
spec sheet or go to www.contractorselect.com
Catalog Number CRI Nominal Lumens Color Temperature Dimming Voltage
FML4W 48 5000LM 835 ZT MVOLT >80 5000 3500K 0-10V 120-277V
FML4W 48 5000LM 840 ZT MVOLT >80 5000 4000K 0-10V 120-277V
FML4W 48 ALO6 SEF 835 MVOLT >80 4000, 5000, 6000 3500K 0-10V* 120-277V
FML4W 48 ALO6 SEF 840 MVOLT >80 4000, 5000, 6000 4000K 0-10V* 120-277V
FML4W 48 5000LM 840 TD >80 5000 4000K Triac Dimming 120V
Note: *When using 0-10v dimming with ALO options it is recommended to set the ALO to the MAX output.
23.9
4.6
5.0
22.3 20.9