Installation Guide

JEBL Installation and
Round High Bay Maintenance
Luminaire Manual
Lithonia Lighting
INDUSTRIAL VALUE STREAM
One Lithonia Way, Conyers, GA 30012
Phone: [phone] Fax: [phone]
www.lithonia.com
Part Number: U219858
Revision Date:
1 Introduction
1.1 Product Description. The JEBL luminaires have
been designed and tested in accordance with
applicable UL/CSA standards and are suitable for
use in wet locations. Max luminaire weight is 14 lbs.
1.2 Remove the new LED high bay from packaging and
inspect for any damages. Handle new LED fixture
with care. If damaged do not use; call your local rep
for replacement.
Figure 1
2 Installation
This fixture is designed to be suspended from the
supplied Eye Bolt or flush mounting installation with
optional Surface Mount Bracket (JEBLSMB). Provide
suitable hardware in accordance with local codes that is
capable of supporting the full weight (14 lbs) of the
luminaire.
2.1.1 Standard Mounting type (Eye Bolt Suspended)
(see figure 1). Install the enclosed eye bolt hook into the
top of the luminaire housing, and tighten securely.
Tighten the lock-nut to prevent the eyebolt from
loosening. (See Figure 1).
WARNING
FAILURE TO TIGHTEN LOCKNUT COULD CAUSE
LUMINAIRE TO FALL RESULTING IN INJURY,
DEATH OR SERIOUS PROPERTY DAMAGE.
2.1.2 Suspend fixture with chain or cable securely
attached to fixture eye bolt.
Page 3 of 4