Specification

LDN6 SWITCHABLE
6" OPEN
New Construction Downlight
DOWNLIGHTING LDN6 SWW
Catalog
Number
Notes
Type
D
I
M
M
A
B
L
E
FEATURES & SPECIFICATIONS
INTENDED USE — Typical applications include corridors, lobbies, conference rooms and private offices.
CONSTRUCTION — Galvanized steel mounting/plaster frame; galvanized steel junction box with
bottom-hinged access covers and spring latches. Reflectors are retained by torsion springs. Vertically
adjustable mounting brackets with commercial bar hangers provide 3-3/4" total adjustment. Two com-
bination ½"-3/4" and four ½" knockouts for straight-through conduit runs. Capacity: 8 (4 in, 4 out). No.
12 AWG conductors, rated for 90°C.
Accommodates 12"-24" joist spacing.
Passive cooling thermal management for 25°C standard. Light engine and drivers are accessible from
above or below ceiling.
Ceiling thickness range 1/2" to 1-1/2".
OPTICS — 55° cutoff
80CRI standard (90CRI optional)
ELECTRICAL — Adjustable lumen output with four module options.
MVOLT 120/277V 50/60Hz driver (0-10V & 120V Phase Dimming to 10% or 1% min dimming level). DALI
driver dimming to 1% also available
FCC CFR Title 47 Part 15 Class A for 277V. FCC CFR Title 47 Part 15 Class B for 120V.
L80 @ 60,000 hours
3 SDCM
LISTINGS — Certified to US and Canadian safety standards. Title 24 compliant (90CRI, up to 1000lm)
Wet location, requires covered ceiling. Wallwash suitable for damp locations only. Some configurations
are Energy Star certified, please visit www.energystar.gov for specific products.
WARRANTY — 5-year limited warranty. This is the only warranty provided and no other statements
in this specification sheet create any warranty of any kind. All other express and implied warranties are
disclaimed. Complete warranty terms located at:
www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
CAN BE USED TO
COMPLY WITH 2019
JA8 HIGH EFFICACY LED LIGHT
SOURCE REQUIREMENTS
LDN6 AR LS 80CRI
Lumen Output Wattage
30K/80CRI 35K/80CRI 40K/80CRI 50K/80CRI
Delivered Lumens LPW Delivered Lumens LPW Delivered Lumens LPW Delivered Lumens LPW
ALO1 (500LM) 6 605 100 615 101 623 102 630 102
ALO1 (750LM) 9 909 101 925 102 936 103 948 104
ALO1 (1000LM) 13 1268 98 1290 99 1306 100 1322 100
ALO2 (1000LM) 12 1360 112 1383 113 1400 113 1418 114
ALO2 (1500LM) 19 2004 108 2038 109 2063 110 2089 110
ALO2 (2000LM) 25 2547 103 2590 104 2622 104 2655 105
ALO3 (2000LM) 25 2655 106 2700 107 2733 108 2768 108
ALO3 (2500LM) 32 3214 101 3269 102 3309 103 3351 103
ALO3 (3000LM) 38 3670 96 3732 97 3778 98 3825 98
ALO4 (4000LM) 39 4035 104 4117 107 4199 109 4241 110
ALO4 (4500LM) 44 4453 101 4544 103 4635 105 4680 107
ALO4 (5000LM) 49 5345 108 5454 111 5563 113 5617 114
Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to
provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® control networks when ordered with drivers marked by a shaded background*
• This luminaire is part of an A+ Certified solution for nLight control networks, providing advanced control functionality at the luminaire level,
when selection includes driver and control options marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details