Installation Guide

FEATURES & SPECIFICATIONS
INTENDED USE — Ideal where high brightness and good illumination levels are required such as retail,
light industrial and warehouses. Certain airborne contaminants can diminish the integrity of
acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for
suitable uses.
Attributes: Available in one lamp or two lamp configuration.
CONSTRUCTION
— Heavy-duty channel, die-formed from code-gauge steel.
Sturdy channel cover secured by captive quarter-turn latch for easy access to wireway.
Combination endplate/channel connector furnished with each fixture.
Finish: Five-stage iron phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted
parts finished with high-gloss, baked white enamel.
ELECTRICAL
— Thermally protected, resetting, Class P, UL Listed and CSA Certified ballast is standard.
Sound rating depends on lamp/ballast combination.
AWM, TFN, THHN wire throughout, rated for required temperatures.
INSTALLATION — For unit or row installations, surface or suspended mounting.
LISTINGS
— UL listed to US and Canadian safety standards. Optional: Mexico NOM.
Damp location listed.
Listed for 25 degree C ambient temperature.
WARRANTY
— 1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx .
Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: C 2 32 MVOLT GEB10IS
INDUSTRIAL C
Catalog
Number
Notes
Type
General-Purpose Strip
C
2’, 3’, 4', 6’ and 8' length
1 or 2 lamps
Notes
1 MVOLT standard for 120-277V applications, 50-60 mhz operation.
Some options require voltage specified.
2 347V, simline lamps only.
3 Not available in slimline.
4 Specify voltage.
5 Order two for 8’ fixtures.
Accessories: Order as separate catalog number.
SQ_ Swivel stem hanger (specify length in 2” increments) HRC1® Hooker T-bar hanger (1-1/2” from ceiling)
1B Ceiling spacer (adjusts from 1-1/2” to 2-1/2” from ceiling) WGCSMR Wireguard, 4’ white for symmetric reflector
5
CONLGC 12” screw-on channel connector WGCASR Wireguard, 4’ white for asymmetric reflector
5
WGCUN NST Wireguard, 4’ white
5
CSMR48 Symmetric reflector, 4’ white, 7” aperture
5
HC36 Chain hangers (1 pair, 36” long) CASR48 Asymmetric reflector, 4’ white, 5-3/4” wide
5
HRC® Hooker T-bar hanger (flush to ceiling)
All dimensions are inches (centimeters)
unless otherwise specified.
Specifications
Length: 24” (61.0)
36” (91.4)
48” (121.9)
72” (182.9)
96” (243.8)
Width: 4-3/8” (11.1)
Fixture
Depth: 2-1/16” (5.2)
C
Series
Number
of lamps Lamp type Voltage Options
C General-
purpose strip
For tandem double
length unit, add prefix T.
Example: TC
1
2
lamp not
included
T8
17 17W T8 (24”)
25 25W T8 (36”)
32 32W T8 (48”)
96T8 59W T8 slimline (96”)
T8HO
48T8HO 44W T8 (48”)
72T8HO 65W T8 (72”)
96T8HO 86W 380mA (96”)
MVOLT
1
120
277
347
Others
available
GEB10IS
Electronic ballasts, <10%THD, instant start
GEB10RS
Electronic ballast, <10%THD, rapid start
2
GEB10PS
Electronic ballast, <10%THD, programmed
start
BILP
T8 high-efficiency ballast, .78bf (low),
instant start
BINP
T8 high-performance ballast, .88bf
(normal), instant start
BIHP
T8 high-performance ballast, 1.20bf (high),
instant start
1/4
One four-lamp ballast
3
GLR
Internal fast-blow fuse (add X for external)
4
GMF
Internal slow-blow fuse (add X for
external)
4
PLR_
Plug-in wiring; specify 1, 2, or 3 branch
circuits and hot wires (A = Black, B = Red,
C = Blue, AB or AC)
4
TILW
Tandem in-line wiring
CSA
CSA Certified (only required for 347V)
NOM
NOM Certified
AL
Aluminum housing; white enamal finish