Specification

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitycontrols.com
© 2014-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/22/17
WSX D
2 of 4
COVERAGE PATTERNS
36 30 20 10 0 ft 10 20
30 36
12 9 6 3 0 m
3 6 9 12
Small
motion
detection
Small
motion
detection
to ~20 ft
6
3
0 m
20
10
0 ft
Small motion ~40 ft coverage
1.2 m
4 ft
Small motion
detection to ~20 ft
Large motion detection to >36 ft
0 18 27 369
ft
0 6 9 123
m
SIDE VIEW
TOP VIEW
CONVERSION FROM GROUND ONLY (NO NEUTRAL) TO NEUTRAL WIRING
This product is pre-congured for wiring without a neutral; however, if connection to neutral is required by code, the unit easily converts in seconds.
Step 1:
Remove Yellow
Label
Step 2:
Loosen Screws and
Remove Metal
Link
Step 3:
Connect Neutral to
Silver Screw and
Ground to Green
Screw
WIRING TO GROUND (NO NEUTRAL) WIRING TO NEUTRAL
GND
H
N
LOAD
BLK
BLK
REMOVE METAL LINK
IF CONNECTING TO
NEUTRAL
VIO (+)
GRY (-)
DIMMING
H
N
LOAD
BLK
BLK
N
GND
VIO (+)
GRY (-)
DIMMING
120/277 VAC WIRING
BLACK* - Line 1 Input
BLACK* - Load 1 Output
*BLACK wires
can be reversed
}
VIOLET - Low Voltage Dim Output (0-10 VDC)
GRAY - Low Voltage Common
WIRE COLOR KEY
347 VAC WIRING (-347 Option)
Red wires replace Black wires.
NOTES:
1.) Per NEC requirements, the 0-10V violet and gray wires must be installed as Class One.
2.) The 0-10V control wires must not exceed 250 ft (76 m) in length and must be sized at no less than 20AWG.
Adaptive Daylight Harvesting (ADH)
With Sensor Switch’s Adaptive Daylight Harvesting (ADH), automatic dimming has never
been more reliable - even in a wall switch. It works by establishing two state change
set-points; daylight and darkness. The light level in the space will then be automatically
maintained by intelligently controlling the dim level of the electric light source. Set-
points can be established using the “Set Now” option or programmed using desired light
levels as measured in foot candles (fc).
DIMMING
RANGE
DARKNESS SET-POINT
DAYLIGHT SET-POINT
AMPLE DAYLIGHT
NO DAYLIGHT
/ KEY LIGHTS FULL ON LIGHTS FULL DIM
• Small motion (e.g. hand movements) detection up to 20 ft (6.10 m), ~625 ft2
• Large motion (e.g. walking) detection greater than 36 ft (10.97 m), ~2025 ft2
• Wall-to-wall PIR coverage
• Units with -PDT (Passive Dual Technology) option
(also called Microphonics) provide overlapping
detection of human activity over the complete
PIR coverage area. Advanced ltering is utilized
to prevent non-occupant noises from keeping the
lights on.