Brochure

ManualsBrandsLittelfuse ManualsElectronic Fast-Acting Fuses3 Amp Fast-Acting, 3AG Type Glass Fuse, 250V (Pack of 5)

Table Of Contents

Untitled

PRODUCT

CATALOG

& DESIGN

GUIDE

Circuit Protection Products

and Mounting Accessories

Summary of content (409 pages)

PAGE 1
PRODUCT CATALOG & DESIGN GUIDE Circuit Protection Products and Mounting Accessories
PAGE 2
FUSE Circuit Protection Products and Mounting Accessories Fuse Characteristics, Terms and Consideration Factors Fuse Selection Checklist Standards Packaging and Part Numbering Legal Disclaimers Agency Approvals 2 125 / 63 / 32 50 • • • • 32 / 24 50 • • • • 440 1206 • 1.75–8 32 50 • • • • 441 0603 • 2–6 32 50 • • • • • 469 1206 1–8 24 / 32 24–63 • • • • • 501 1206 10, 12, 15, 20 32 150 • • • • 466 1206 0.
PAGE 3
Lead Free RoHS Compliant CQC CCC K PSE Semko Asia BSI TUV VDE Europe CE 10,000 10,000 10,000 50 35–50 35–50 50 50 100 50–100 50 50 10 50 25–63 100 100 50 50 50 130 150 100 100 Americas UMF 125 125 125 125 250 250 250 250 250 300 300 125 250 65 250 125 125 125 65 65 250 250 250 300 Operating Temperature Range cURus 0.002–5 0.002–5 0.002–5 0.5–5 0.4–6.3 0.4–6.3 0.5–10 0.5–10 1–10 1–10 1–6.3 0.35–1.5 0.6 0.125–4 0.8–6.3 0.05–6.3 0.05–6.3 0.35–1.5 0.125–4 0.125–4 0.5–6.3 0.8–6.3 2–5 0.8–6.
PAGE 4
Device Range 2 (Operating Current Options in Amps) Max. Voltage Rating 2 (Volts) UR CSA 0.062–15 20–30 0.062–5 0.5–5 0.5–5 0.375–7 125 32 250 125 125 125 300DC / 50AC 300DC / 50AC 50 50 –55°C to +125°C 50 50 • • • • • • • • • • • • 0.062–15 125 300DC / 50AC • • • • • 0.1–10 0.1–10 0.125–5 2–6.3 0.125–10 0.25–7 50 50 35–50 35–63 100 100 • • • • 0.25–2.5 0.375–10 0.25–7 250 250 250 250 350 350 250 / 300 / 350 250 250 / 125 250 / 125 35 35–500 35–400 0.032–15 0.032–16 0.2–6.3 0.04–6.3 0.
PAGE 5
FUSE Circuit Protection Products and Mounting Accessories Fuseholder Type Series Name Fuse Type Fuse Series Circuit Connection Method Series Cartridge Fuse Holders: 810/811/813/814 830/831/834 Circuit Board Mount Fuse Enclosures 345 6.3×32 mm (3AB/3AG) 5×20 mm 6.
PAGE 6
FUSE Circuit Protection Products and Mounting Accessories Series Name Fuseholder Type Fuse Type Fuse Series Circuit Connection Method 6.3×32mm (3AB/3AG) 312 / 313 / 314 / 322 / 326 332 / 373 / 505 / 506 / 508 / 605 Thru-Hole 102080 / 122090 / 100058 100 / 04450001 / 00300210 / 5200001 111501 / 111506 111505 111 Series Series Cartridge Fuse Clips: 102/122 100/102/122 100/445/030/520 5×20 mm Thru-Hole 111 4.5×14.
PAGE 7
FUSE Circuit Protection Products and Mounting Accessories Fuse Characteristics, Terms and Consideration Factors The purpose of this introductory section is to promote a better understanding of both fuses and common application details within circuit design. small variations from the controlled test conditions can greatly affect the predicted life of a fuse when it is loaded to its nominal value, usually expressed as 100% of rating.
PAGE 8
FUSE Circuit Protection Products and Mounting Accessories Fuse Characteristics, Terms and Consideration Factors (continued) length or diameter dimensions of the glass fuses. Their designation was modified to AB in place of AG, indicating that the outer tube was constructed from Bakelite, fibre, ceramic, or a similar material other than glass.
PAGE 9
FUSE Circuit Protection Products and Mounting Accessories Fuse Characteristics, Terms and Consideration Factors (continued) of the fuse, it is common practice to specify fuses with 125 or 250 volt ratings for secondary circuit protection of 500 volts or higher. As mentioned previously (See RE-RATING), fuses are sensitive to changes in current, not voltage, maintaining their “status quo” at any voltage up to the maximum rating of the fuse.
PAGE 10
FUSE Circuit Protection Products and Mounting Accessories Fuse Selection Checklist The application guidelines and product data in this guide are intended to provide technical information that will help with application design. Since these are only a few of the contributing parameters, application testing is strongly recommended and should be used to verify performance in the circuit/application. Many of the factors involved with fuse selection are listed below.
PAGE 11
FUSE Circuit Protection Products and Mounting Accessories Fuse Selection Checklist (continued) 4. OVERLOAD CURRENT CONDITION: The current level for which protection is required. Fault conditions may be specified, either in terms of current or, in terms of both current and maximum time the fault can be tolerated before damage occurs. Time-current curves should be consulted to try to match the fuse characteristic to the circuit needs, while keeping in mind that the curves are based on average data. 5.
PAGE 12
FUSE Circuit Protection Products and Mounting Accessories Fuse Selection Checklist (cont.) FIGURE 1 CHART 1 WAVESHAPES A FORMULAS ip i=k I2t = ip2 t t ib Current (Amperes) 10 B ip 8 6 C 2 l t Pulse Energy .001 i = ip-kt I2t = (1/3)(ip2 + ipib + ib2) t t i = ip sin t I2t = (1/2) ip2 t ip 4 2 t Normal Operating Current D .002 .003 .004 .005 Time (Seconds) ip I2t = (1/3) ip2 t t .
PAGE 13
FUSE Circuit Protection Products and Mounting Accessories Standards Fuse ratings and other performance criteria are evaluated under laboratory conditions and accptance criteria, as defined in one or more of the various fuse standards. It is important to understand these standards so that the fuse can be properly applied to circuit protection applications. UL/CSA/ANCE (Mexico) 248-14 FUSES FOR SUPPLEMENTARY OVERCURRENT PROTECTION (600 Volts, Maximum) (Previously UL 198G and CSA C22.2, No.
PAGE 14
FUSE Circuit Protection Products and Mounting Accessories Standards (continued) UL/CSA/ANCE (Mexico) 248-14 vs. IEC 60127 Part 2 FUSE OPENING TIMES vs. METI/MITI Percent of UL & CSA IEC TYPE F IEC TYPE F IEC TYPE T IEC TYPE T METI/MITI Rating STD 248-14 Sheet 1 (*) Sheet 2 (*) Sheet 3 (*) Sheet 5 (*) 110 4Hr.Min. — — — — 130 — — — — — 135 60 Minutes Max. — — — — 150 — 160 — — — — — 1Hr.Max. 200 2 Minutes Max. — — — — 2 Minutes Max. 210 — 1Hr.Min.
PAGE 15
FUSE Circuit Protection Products and Mounting Accessories Packaging and Part Numbering Littelfuse Fuse Products Traditional Part Numbering System 0XXX XXXX X X XXXXXX Options Codes * Packaging Type * Product Series Code Packaging Quantity Code * Example: 437 series fuse is “0437” Ampere Rating Code Decimal is to far right for whole number amp ratings, to far left for ratings less than one, and within center for fractional amp ratings. Examples: 10A fuse is “010.” 1/4A or 0.25A fuse is “.
PAGE 16
FUSE Circuit Protection Products and Mounting Accessories Legal Disclaimers Liability Disclaimer Littelfuse, Inc. its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Littelfuse”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained here or in any other disclosure relating to any product.
PAGE 17
Surface Mount Fuses Ceramic Fuse > 437 Series 437 Series – 1206 Fast-Acting Fuse RoHS Pb Description This 100% Lead-free, RoHS compliant and Halogen-free fuse series has been designed specifically to provide over current protection to circuits that see high working ambient temperatures (up to 150ºC). The general design ensures excellent temperature stability and performance reliability.
PAGE 18
Surface Mount Fuses Ceramic Fuse > 437 Series 5A 7A 8A 2.5A 3A 3.5A 4A 1.25A 1.5A 1.75A 2A 120 100 1 80 60 40 -65 -45 -25 -5 15 35 55 75 95 115 135 155 TIME IN SECONDS PERCENT OF RATING 10 .750A 1A 140 .250A Average Time Current Curves .375A .500A Temperature Re-rating Curve 0.1 TEMPERATURE (°C) 0.01 Note: 1. Re-rating depicted in this curve is in addition to the standard re-rating of 20% for continuous operation. Example: 0.001 0.
PAGE 19
Surface Mount Fuses Ceramic Fuse > 437 Series Product Characteristics Body: Advanced Ceramic Terminations: Ag / Ni / Sn (100% Lead-free) Element Cover Coating: Ceramic/Lead-free Glass Materials Moisture IPC/JEDEC J-STD-020, Level 1 Sensitivity Level Solderability IPC/EIC/JEDEC J-STD-002, Condition B Humidity Test MIL-STD-202, Method 103, Condition D Resistance to Solder Heat Moisture Resistance MIL-STD-202, Method 210, Condition B MIL-STD-202, Method 106 3.200 ± 0.1778 [0.126 ± 0.007] 1.000 [0.
PAGE 20
Surface Mount Fuses Ceramic Fuse > 438 Series 438 Series – 0603 Fast-Acting Fuse RoHS Pb Description The 438 Series is a 100% Lead-free, RoHS compliant and Halogen-free fuse series designed specifically to provide over-current protection to circuits that operate under high working ambient temperature up to 150ºC. The general design ensures excellent temperature stability and performance reliability.
PAGE 21
Surface Mount Fuses Ceramic Fuse > 438 Series 120 100 10 80 60 40 -65 -45 -25 -5 15 35 55 75 95 115 135 155 TEMPERATURE (°C) TIME IN SECONDS PERCENT OF RATING 100 .750A 1A 1.25A 1.5A 1.75A 2A 2.5A 3A 3.5A 4A 5A 6A 140 .250A Average Time Current Curves .375A .500A Temperature Re-rating Curve 1 0.1 Note: 1. Re-rating depicted in this curve is in addition to the standard re-rating of 20% for continuous operation. 0.
PAGE 22
Surface Mount Fuses Ceramic Fuse > 438 Series Product Characteristics Body: Advanced Ceramic Terminations: Ag / Ni / Sn (100% Lead-free) Element Cover Coating: Lead-free Glass Materials Moisture IPC/JEDEC J-STD-020, Level 1 Sensitivity Level Solderability IPC/EIC/JEDEC J-STD-002, Condition B Humidity MIL-STD-202, Method 103, Conditions D Resistance to Solder Heat MIL-STD-202, Method 210, Condition B Dimensions Moisture Resistance MIL-STD-202, Method 106 Thermal Shock MIL-STD-202, Method 107, C
PAGE 23
Surface Mount Fuses Ceramic Fuse > 440 Series 440 Series, 1206 High I2t Fuse RoHS Pb Description The 440 Series is a 100% Lead-free, RoHS compliant and Halogen-free fuse series designed specifically to provide over-current protection to circuits that operate under high working ambient temperatures up to 150ºC and high inrush currents. The general design ensures excellent temperature stability and performance reliability.
PAGE 24
Surface Mount Fuses Ceramic Fuse > 440 Series Temperature Rerating Curve Average Time Current Curves 100 120 100 10 80 60 40 -65 -45 -25 -5 15 35 55 75 95 115 135 155 TEMPERATURE (°C) TIME IN SECONDS PERCENT OF RATING 140 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 20% for continuous operation. 0.01 Example: For continuous operation at 75 degrees celsius, the fuse should be derated as follows: I = (0.80)(0.85)IRAT = (0.68)IRAT 0.
PAGE 25
Surface Mount Fuses Ceramic Fuse > 440 Series Product Characteristics Materials Body: Advanced Ceramic Terminations: Ag / Ni / Sn (100% Lead-free) Element Cover Coating: Lead-free Glass Moisture IPC/JEDEC J-STD-020, Level 1 Sensitivity Level Solderability IPC/ECA/JEDEC J-STD-002, Condition C Humidity Test MIL-STD-202, Method 103, Conditions D Resistance to Solder Heat MIL-STD-202, Method 210, Condition B Dimensions Moisture Resistance MIL-STD-202, Method 106 Thermal Shock MIL-STD-202, Method
PAGE 26
Surface Mount Fuses Ceramic Fuse > 441 Series 441 Series – 0603 High I2t Fuse RoHS Pb Description This 100% Lead-free, RoHS compliant and Halogen-free fuse series has been designed specifically to provide over current protection to circuits that see high working ambient temperatures (up to 150ºC) and high inrush currents. The general design ensures excellent temperature stability and performance reliability.
PAGE 27
Surface Mount Fuses Ceramic Fuse > 441 Series 100 140 120 10 100 80 60 40 -65 -45 -25 -5 15 35 55 75 95 115 135 155 TEMPERATURE (°C) TIME IN SECONDS PERCENT OF RATING 2.5A 3A 3.5A 4A 5A 6A Average Time Current Curves 2A Temperature Re-rating Curve 1 0.1 Note: 1. Re-rating depicted in this curve is in addition to the standard re-rating of 20% for continuous operation. 0.01 For continuous operation at 75 degrees celsius, the fuse should be rerated as follows: I = (0.80)(0.
PAGE 28
Surface Mount Fuses Ceramic Fuse > 441 Series Product Characteristics Body: Advanced Ceramic Terminations: Ag / Ni / Sn (100% Lead-free) Element Cover Coating: Lead-free Glass Materials Moisture IPC/JEDEC J-STD-020, Level 1 Sensitivity Level Solderability IPC/ECA/JEDEC J-STD-002, Condition C Humidity MIL-STD-202, Method 103, Conditions D Resistance to Solder Heat MIL-STD-202, Method 210, Condition B Dimensions Moisture Resistance MIL-STD-202, Method 106 Thermal Shock MIL-STD-202, Method 107, C
PAGE 29
Surface Mount Fuses Ceramic Fuse > 469 Series 469 Series – 1206 Slo-Blo® Fuse RoHS Pb Description The 469 Series is a 100% Lead-free, RoHS compliant and Halogen-free fuse series designed specifically to provide over-current protection to circuits that operate under high working ambient temperature up to 150ºC. The general design ensures excellent temperature stability and performance reliability.
PAGE 30
Surface Mount Fuses Ceramic Fuse > 469 Series 100 120 10 100 80 60 40 -65 -45 -25 -5 15 35 55 75 95 115 135 1 TIME IN SECONDS PERCENT OF RATING 140 4A 5A 6A 7A 8A Average Time Current Curves 2A Temperature Re-rating Curve 155 TEMPERATURE (°C) 0.1 Note: 1. Re-rating depicted in this curve is in addition to the standard re-rating of 20% for continuous operation. 0.01 Example: For continuous operation at 75 degrees celsius, the fuse should be rerated as follows: I = (0.80)(0.
PAGE 31
Surface Mount Fuses Ceramic Fuse > 469 Series Product Characteristics Body: Advanced Ceramic Terminations: A g / Ni / Sn (100% Lead-free) Element Cover Coating: Lead-free Glass Materials Moisture IPC/JEDEC J-STD-020, Level 1 Sensitivity Level Solderability IPC/EIC/JEDEC J-STD-002, Condition B Humidity MIL-STD-202, Method 103, Conditions D Resistance to Soldering Heat MIL-STD-202, Method 210, Condition B Dimensions 1.000 ± 0.200 [0.039 ± 0.008 1.63 + 0.1/-0.2 [0.064 + 0.004/-0.
PAGE 32
Surface Mount Fuses Ceramic Fuse > 501 Series 501 Series – High Current 1206 Fast-Acting Fuse RoHS Pb Description The 501 Series is a 100% Lead-free, RoHS compliant and Halogen-free fuse series designed specifically to provide over- current protection to circuits that operate under high working ambient temperature up to 150°C. The general design ensures excellent temperature stability and performance reliability.
PAGE 33
Surface Mount Fuses Ceramic Fuse > 501 Series Average Time Current Curves 10A 12A 15A 20A Temperature Re-rating Curve 140 120 100 10.000 80 60 40 1.000 -65 -45 -25 -5 15 35 55 75 95 115 135 155 TEMPERATURE (°C) TIME IN SECONDS PERCENT OF RATING 100.000 0.100 Note: 1. Re-rating depicted in this curve is in addition to the standard re-rating of 20% for continuous operation. 0.010 Example: For continuous operation at 75 degrees celsius, the fuse should be rerated as follows: I = (0.
PAGE 34
Surface Mount Fuses Ceramic Fuse > 501 Series Product Characteristics Body: Advanced Ceramic Terminations: Ag / Ni / Sn (100% Lead-free) Element Cover Coating: Lead-free Glass Materials Moisture IPC/JEDEC J-STD-020, Level 1 Sensitivity Level Solderability IPC/ECA/JEDEC J-STD-002, Condition B Humidity Test MIL-STD-202, Method 103, Conditions D Resistance to Solvents MIL-STD-202, Method 210, Condition B Dimensions Moisture Resistance MIL-STD-202, Method 106 Thermal Shock MIL-STD-202, Method 107,
PAGE 35
Surface Mount Fuses Thin Film > 1206 Size > Very Fast-Acting > 466 Series 466 Series 1206 Fast-Acting Fuse RoHS Pb Description The 466 Series Fast-Acting Surface Mount Fuse (SMF) is a small (1206 size) thin-film device designed for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices. This series is 100% lead-free and meets the requirements of the RoHS directive.
PAGE 36
Surface Mount Fuses Thin Film > 1206 Size > Very Fast-Acting > 466 Series 2A 2 1/2A 3A 4A 5A 1 1/4A 1 1/2A 1 3/4A 1A 3/4A 1/2A 3/8A 1/4A Average Time Current Curves 1/8A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Re-rating depicted in this curve is in addition to the standard re-rating of 25% for continuous operation. 0.01 Example: For continuous operation at 70 degrees celsius, the fuse should be rerated as follows: I = (0.75)(0.80)IRAT = (0.60)IRAT 2.
PAGE 37
Surface Mount Fuses Thin Film > 1206 Size > Very Fast-Acting > 466 Series Dimensions Product Characteristics Body: Advanced High Temperature Substrate Terminations: 100% Tin over Nickel over Copper Element Cover Coat: Conformal Coating Materials Operating Temperature – 55OC to 90OC. Consult temperature re-rating curve chart.
PAGE 38
Surface Mount Fuses Thin Film > 1206 Size > Very Fast-Acting > 429 Series 429 Series 1206 Fast-Acting Fuse RoHS Pb Description The 429 Series Fast-Acting SMF is a small (1206 size) thinfilm device designed for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices. This series is Halogen-Free, Lead-Free and meets the requirements of the RoHS directive. Features • RoHS compliant and Lead-Free 7A device available-add ‘L’ suffix to part number.
PAGE 39
Surface Mount Fuses Thin Film > 1206 Size > Very Fast-Acting > 429 Series Average Time Current Curves 7A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Example: For continuous operation at 70 degrees celsius, the fuse should be deratedas follows: I = (0.75)(0.80)IRAT = (0.60)IRAT 2. The temperature derating curve represents the nominal conditions.
PAGE 40
Surface Mount Fuses Thin Film > 1206 Size > Very Fast-Acting > 429 Series Product Characteristics Materials Body: Epoxy Substrate Terminations, RoHS Compliant Device (429L): 100% Tin over Nickel over Copper Element Cover Coat: Conformal Coating NOTE: Do not use alcohol-based cleaners or solvents with 429 Series Thin-Film Fuses as it may damage the coating. Operating Temperature – 55OC to 90OC. Consult temperature re-rating chart. For operation above 90°C contact Littelfuse.
PAGE 41
Surface Mount Fuses Thin Film > 1206 Size > Slo-Blo® Fuse > 468 Series 468 Series 1206 Slo-Blo® Fuse RoHS Pb Description The 468 Series Slo-Blo® Surface Mount Fuse (SMF) is a small (1206 size) thin-film device designed for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices. This series is 100% lead-free and meets the requirements of the RoHS directive. New Halogen-Free 468 Series fuses are available–to order use the “HF” suffix.
PAGE 42
Surface Mount Fuses Thin Film > 1206 Size > Slo-Blo® Fuse > 468 Series 2A 2.5A 3A 1A 100 1.5A Average Time Current Curves .5A Temperature Re-rating Curve Time in Seconds 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Example: For continuous operation at 70 degrees celsius, the fuse should be deratedas follows: I = (0.75)(0.80)IRAT = (0.60)IRAT 0.001 2.
PAGE 43
Surface Mount Fuses Thin Film > 1206 Size > Slo-Blo® Fuse > 468 Series Product Characteristics Materials Body: Epoxy Substrate Terminations: 100% Tin over Nickel over Copper Element Cover Coat: Conformal Coating Operating Temperature –55OC to 90OC. Consult temperature re-rating curve chart.
PAGE 44
Surface Mount Fuses Thin Film > 0603 Size > Very Fast-Acting > 467 Series 467 Series 0603 Fast-Acting Fuse RoHS Pb Description The 467 Series Fast-Acting Surface Mount Fuse (SMF) is an ultra small (0603 size) thin-film device designed for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices. This series is 100% lead-free and meets the requirements of the RoHS directive.
PAGE 45
Surface Mount Fuses Thin Film > 0603 Size > Very Fast-Acting > 467 Series 0.750 A 1.00 A 1.25 A 1.50 A 1.75 A 2.00 A 2.50 A 3.00 A 3.50 A 4.00 A 5.00 A 0.375 A 0.500 A Average Time Current Curves 0.250 A Temperature Rerating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Example: For continuous operation at 70 degrees celsius, the fuse should be deratedas follows: I = (0.75)(0.80)IRAT = (0.
PAGE 46
Surface Mount Fuses Thin Film > 0603 Size > Very Fast-Acting > 467 Series Product Characteristics Materials Body: Advanced High Temperature Substrate Terminations: 100% Tin over Nickel over Copper Element Cover Coat: Conformal Coating Operating Temperature – 55OC to 90OC. Consult temperature re-rating curve chart. For operation above 90°C contact Littelfuse. Humidity MIL-STD-202, Method 103, Condition D Dimensions 1.60±0.102 (.063"±0.
PAGE 47
Surface Mount Fuses Thin Film > 0603 Size > Fast-Acting > 494 Series 494 Series Fuse, NRA Special Series Integrated Circuit Protector RoHS Pb ® Description The 494 Series Fast-Acting SMF is an ultra small (0603 size) thin-film device designed for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices. This series is 100% lead-free and meets the requirements of the RoHS directive.
PAGE 48
Surface Mount Fuses Thin Film > 0603 Size > Fast-Acting > 494 Series 0.750 A 1.00 A 1.25 A 1.40 A 1.50 A 1.75 A 2.00 A 2.50 A 3.00 A 3.50 A 3.15 A 4.00 A 5.00 A 0.375 A 0.500 A Average Time Current Curves 0.250 A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in th1s curve 1s in addition to the standard rerating of 20% for 0.01 continuous operation. Example: For continuous operation at 75 degrees Celsius, the fuse should be rerated as follows I = (0.80)(0.
PAGE 49
Surface Mount Fuses Thin Film > 0603 Size > Fast-Acting > 494 Series Product Characteristics Materials Body: Advanced High Temperature Substrate Terminations: 100% Tin over Nickel over Copper Element Cover Coat: Conformal Coating Operating Temperature – 55°C to 90°C. Consult temperature re-rating curve chart. For operation above 90°C contact Littelfuse. Humidity MIL-STD-202, Method 103, Condition D Dimensions 1.60±0.102 (.063"±0.
PAGE 50
Surface Mount Fuses Thin Film > 0402 Size > Very Fast-Acting > 435 Series 435 Series 0402 Fast-Acting Fuse RoHS Pb Description The 435 Series are fast-acting surface mount thin-film fuses. Their ultra-small size (0402 size) makes them ideal for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices. This series is 100% lead-free and meet the requirements of the RoHS directive.
PAGE 51
Surface Mount Fuses Thin Film > 0402 Size > Very Fast-Acting > 435 Series 3A 3.5A 4A 5A .5A 1A 1.25A 1.5A 1.75A 2A 2.5A 100 .75A .25A Average Time Current Curves .375A Temperature Re-rating Curve 10 TIME IN SECONDS 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Example: For continuous operation at 70 degrees celsius, the fuse should be deratedas follows: I = (0.75)(0.80)IRAT = (0.60)IRAT 2.
PAGE 52
Surface Mount Fuses Thin Film > 0402 Size > Very Fast-Acting > 435 Series Product Characteristics Materials Body: Epoxy / Glass Substrate; Parts with ‘HF’ suffix: Halogen Free Epoxy / Glass Terminations: 100% Tin over Nickel over Copper Device Weight: 0.316mg Terminal Strength MIL-STD-202, Method 211, Test Condition A Insulation Resistance After Opening: Greater than 10,000Ohms Operating Temperature –55°C to 90°C. Consult temperature re-rating curve chart.
PAGE 53
Surface Mount Fuses NANO2® Fuse > Very Fast-Acting > 448 Series 448 Series Fuse RoHS PS E Pb Description The lead-free Nano2® SMF Fuse is a very small, square surface mount fuse that is RoHS compliant, Halogen Free and 100% lead-free. This product is fully compatible with lead-free solder alloys and higher temperature profiles associated with lead-free assembly.
PAGE 54
Surface Mount Fuses NANO2® Fuse > Very Fast-Acting > 448 Series Electrical Specifications by Item Ampere Rating (A) Amp Code 0.062 .062 Max Voltage Rating (V) 125 0.080 .080 125 0.100 .100 0.125 Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2sec) 5.56 0.00023 x x 4.47 0.00043 x x 125 2.94 0.00082 x x .125 125 2.05 0.00130 x x Interrupting Rating PS E 0.160 .160 125 1.67 0.00280 x x 0.200 .200 125 1.24 0.00380 x x 0.250 .250 125 0.
PAGE 55
Surface Mount Fuses NANO2® Fuse > Very Fast-Acting > 448 Series 448 SERIES NANO LEAD FREE VERY FAST ACTING FUSE Average Time Current Curves .062 A .080 A .100 A .125 A .160 A .200 A .250 A .315 A .375 A .40 A .50 A .63 A .75 A .80 A 1.00 A 1.25 A 1.50 A 1.60 A 2.00 A 2.50 A 3.00 A 3.15 A 3.50 A 4.00 A 5.00 A 6.30 A 7A 8A 10 A 12 A 15 A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1.
PAGE 56
Surface Mount Fuses NANO2® Fuse > Very Fast-Acting > 448 Series Product Characteristics Materials Body: Ceramic Terminations: Gold-plated Caps Product Marking Brand, Amperage Rating Operating Temperature Moisture Sensitivity Level Thermal Shock Mechanical Shock -55oC to 125oC Level 1, J-STD-020 Vibration Solderability MIL-STD-202, Method 208 Insulation Resistance (after Opening) MIL-STD-202, Method 302, Test Condition A (10,000 ohms minimum) Moisture Resistance Salt Spray Resistance to Solderi
PAGE 57
Surface Mount Fuses NANO2® > Slo-Blo® Fuse > 449 Series 449 Series Fuse RoHS PS E Pb Description The lead free NANO2® Slo-Blo® fuse is RoHS compliant, Halogen Free and 100% lead-free. This product is fully compatible with lead-free solder alloys and higher temperature profiles associated with lead-free assembly. The Slo-Blo® fuse design has enhanced inrush withstand characteristics over the NANO2® Fast-Acting Fuse.
PAGE 58
Surface Mount Fuses NANO2® > Slo-Blo® Fuse > 449 Series .750A 1A 1.5A 2A 2.5A 3A 3.5A 4A 5A Average Time Current Curves .375A .500A Temperature Re-rating Curve 1000 TIME IN SECONDS 100 10 1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.1 0.
PAGE 59
Surface Mount Fuses NANO2® > Slo-Blo® Fuse > 449 Series Product Characteristics Materials Body: Ceramic Terminations: Gold-plated Caps Product Marking Brand, Amperage Rating Operating Temperature Moisture Sensitivity Level MIL-STD-202, Method 107, Test Condition B, 5 cycles, -65°C to 125°C, 15 minutes @ each extreme MIL-STD-202, Method 213, Test I: Deenergized. 100G’s pk amplitude, sawtooth wave 6ms duration, 3 cycles XYZ+xyz = 18 shocks MIL-STD-202, Method 201: 0.03" amplitude, 10-55 Hz in 1 min.
PAGE 60
Surface Mount Fuses NANO2® > Very Fast-Acting Fuse > 451/453 Series 451/453 Series Fuse RoHS PS E Description The Nano2® SMF Fuse is a very small, Wire-in-Air (WIA) square shape surface mount fuse that was designed for secondary side circuit over-current protection applications. These fuses are designed for PCB using surface mount technology. Features • Very fast-acting • Small size Agency Approvals AGENCY AGENCY FILE NUMBER AMPERE RANGE E10480 6.3A - 20A 29862 0.
PAGE 61
Surface Mount Fuses NANO2® > Very Fast-Acting Fuse > 451/453 Series Electrical Specifications by Item Ampere Rating (A) Amp Code 0.062 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.375 0.400 0.500 0.630 0.750 0.800 1.00 1.25 1.50 1.60 2.00 2.50 3.00 3.15 3.50 4.00 5.00 6.30 .062 .080 .100 .125 .160 .200 .250 .315 .375 .400 .500 .630 .750 .800 001. 1.25 01.5 01.6 002. 02.5 003. 3.15 03.5 004. 005. 06.
PAGE 62
Surface Mount Fuses NANO2® > Very Fast-Acting Fuse > 451/453 Series Temperature Re-rating Curve Average Time Current Curves 62mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 375mA 400mA 500mA 630mA 750mA 800mA 1A 1.25A 1.5A 1.6A 2A 2.5A 3A 3.15A 3.5A 4A 5A 6.3A 7A 8A 10A 12A 15A 20A Fast Acting Series TC Curve 100 10 TIME IN SECONDS 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.01 0.
PAGE 63
Surface Mount Fuses NANO2® > Very Fast-Acting Fuse > 451/453 Series Product Characteristics Body: Ceramic Terminations: Gold-Plated Caps / Sn-dipped Silver Plated Caps (451 RoHS/HF series) SnPb Plated Caps (for 451 Non-RoHS series, 375mA-15A) Silver-plated Caps (451MR RoHS ratings below 375mA and 453 RoHS Series) Materials Brand, Ampere Rating Product Marking Operating Temperature Moisture Sensitivity Level Thermal Shock MIL-STD-202, Method 107, Test Condition B, 5 cycles, -65°C / +125°C, 15 minutes @
PAGE 64
Surface Mount Fuses NANO2® > Slo-Blo® Fuse > 452/454 Series 452/454 Series Fuse RoHS PS E Description The NANO2® Slo-Blo® fuse has enhanced inrush withstand characteristics over the NANO2® Fast-Acting fuse. The unique time delay feature of this fuse design helps solve the problem of nuisance “opening” by accommodating inrush currents that normally cause a fast-acting fuse to open. Features Agency Approvals AGENCY AGENCY FILE NUMBER AMPERE RANGE E10480 0.375A - 12A 29862 0.
PAGE 65
Surface Mount Fuses NANO2® > Slo-Blo® Fuse > 452/454 Series Temperature Re-rating Curve Average Time Current Curves 12.0A 8.00A 7.00A 5.00A 4.00A 3.50A 3.00A 2.50A 2.00A 1.50A 1.00A 750mA 500mA 375mA TIME IN SECONDS 100 10 1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.1 0.01 0.
PAGE 66
Surface Mount Fuses NANO2® > Slo-Blo® Fuse > 452/454 Series Product Characteristics Body: Ceramic Terminations: Gold-plated Caps / Sn-dipped Silver Plated Caps (452 Series) Silver-plated Caps (454 Series) Materials Product Marking Brand, Ampere Rating Operating Temperature -55°C to 125°C Moisture Sensitivity Level Level 1, J-STD-020 Solderability MIL-STD-202, Method 208 Insulation Resistance (after Opening) MIL-STD-202, Method 302, Test Condition A (10,000 ohms minimum) Thermal Shock MIL-STD-2
PAGE 67
Surface Mount Fuses NANO2® > Very Fast Acting Fuse > 456 Series 456 Series Fuse RoHS PS E Description The High Current NANO2® Fuse is a small square surface mount fuse that is designed to support higher current requirements of various applications.
PAGE 68
Surface Mount Fuses NANO2® > Very Fast Acting Fuse > 456 Series Average Time Current Curves 1000 40 20 0 20 40 60 -60°C -76°F -40°C -40°F -20°C -4°F 0°C 32°F 20°C 40°C 60°C 80°C 68°F 104°F 140°F 176°F AMBIENT TEMPERATURE 100°C 212°F 120°C 140°C 248°F 264°F 100 TIME IN SECONDS 0 PERCENT OF DOWNUPRATING PERCENT OF UPRATING 60 20A 25A 30A 40A Temperature Re-rating Curve 10 1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.
PAGE 69
Surface Mount Fuses NANO2® > Very Fast Acting Fuse > 456 Series Product Characteristics Materials Body: Ceramic Cap: Silver Plated Brass Product Marking Body: Brand Logo, Current Rating Insulation Resistance MIL-STD-202, method 302, Test Condition A (10,000 ohms, Minimum) Solderability MIL-STD-202, Method 208 Resistance to Soldering Heat MIL-STD-202, Method 210, Test Condition B (10 sec at 260OC) Min. copper layer thickness = 100µm Min.
PAGE 70
Surface Mount Fuses NANO2® > 458 Series 1206 Size Inrush Withstand Fuse 458 Series Fuse RoHS Description The 458 Series Nano2® Fuse is an ultra-small, square surface mount fuse designed to support a variety of space constrained overcurrent protection applications. Offering a 1206 size footprint, it is the smallest wire-in-air type surface mount fuse offered by Littelfuse.
PAGE 71
Surface Mount Fuses NANO2® > 458 Series 1206 Size Inrush Withstand Fuse Average Time Current Curves 1.00A 1.25A 1.50A 1.60A 2.00A 2.50A 3.00A 3.15A 3.50A 4.00A 5.00A 6.30A 7.00A 8.00A 10.00A Temperature Re-rating Curve 100 TIME IN SECONDS 10 Note: 1 0.1 0.01 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.
PAGE 72
Surface Mount Fuses NANO2® > 458 Series 1206 Size Inrush Withstand Fuse Product Characteristics Materials Body: Ceramic Cap: Gold Plated Brass Operating Temperature –55OC to 125OC with proper derating Product Marking Body: Current Rating (Refer to Electrical Characteristic table) Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 cycles -65oC to +125oC) Vibration MIL-STD-202, Method 201 (10-55 Hz) Moisture Resistance MIL-STD-202, Method 106, High Humidity (90-98%RH), Heat (65oC) MIL-STD-
PAGE 73
Surface Mount Fuses NANO2® > 250V > Slo-Blo® Fuse > 443 Series 443 Series Fuse PS E RoHS Description The 250V Nano2® Fuse is a small square surface mount fuse that is designed to enable compliance with the RoHS directive. This product is fully compatible with lead-free solder alloy and higher temperature profiles associated with lead-free assembly.
PAGE 74
Surface Mount Fuses NANO2® > 250V > Slo-Blo® Fuse > 443 Series Average Time Current Curves 0.50 A 0.75 A 1.00 A 1.50 A 2.00 A 2.50 A 3.00 A 3.50 A 4.00 A 5.00 A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.
PAGE 75
Surface Mount Fuses NANO2® > 250V > Slo-Blo® Fuse > 443 Series Product Characteristics Materials Body: Ceramic Cap: Silver Plated Brass Operating Temperature –55OC to 125OC Product Marking Body: Brand Logo, Current Rating Rated Voltage, and T - Characteristic “T” Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 cycles -65oC to +125oC) Vibration MIL-STD-202, Method 201 (10-55 Hz) Moisture Resistance MIL-STD-202, Method 106, High Humidity (90-98%RH), Heat (65oC) Salt Spray MIL-STD-202,
PAGE 76
Surface Mount Fuses NANO2® > 250V UMF > Fast-Acting Fuse > 464 Series 464 Series Fuse PS E RoHS Description The Surface Mount Nano2® 250V Fuse UMF product family complies with IEC Publication IEC60127-4-Universal Modular Fuse-Links [UMF]. This IEC standard has been accepted world wide.
PAGE 77
Surface Mount Fuses NANO2® > 250V UMF > Fast-Acting Fuse > 464 Series 100 .80 A 1.00 A 1.25 A 1.60 A 2.00 A 2.50 A 3.15 A 4.00 A 5.00 A 6.30 A Average Time Current Curves .50 A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 15% for continuous operation. 0.01 0.001 0.
PAGE 78
Surface Mount Fuses NANO2® > 250V UMF > Fast-Acting Fuse > 464 Series Product Characteristics Thermal Shock MIL-STD-202, Method 107, Test Condition B, 5 cycles, -65°C / +125°C Mechanical Shock MIL-STD-202, Method 213, Test Condition A Vibration MIL-STD-202, Method 201 (10-55 Hz) Level 1, J-STD-020 Moisture Resistance MIL-STD-202, Method 106, 10 cycles Solderability IEC 60127-4 Salt Spray MIL-STD-202, Method 101, Test Condition B (48hrs) Insulation Resistance (after Opening) IEC 60127-4 (0.
PAGE 79
Surface Mount Fuses NANO2® > 250V UMF Time Lag Fuse > 465 Series 465 Series Fuse PS E RoHS Description The Surface Mount Nano2® 250V UMF product family complies with IEC Publication IEC60127-4-Universal Modular Fuse-Links [UMF]. This IEC standard has been accepted world wide.
PAGE 80
Surface Mount Fuses NANO2® > 250V UMF Time Lag Fuse > 465 Series Average Time Current Curves 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 0.01 1. Rerating depicted in this curve is in addition to the standard derating of 15% for continuous operation. 0.001 .
PAGE 81
Surface Mount Fuses NANO2® > 250V UMF Time Lag Fuse > 465 Series Product Characteristics Materials Body: High Performance Ceramic Terminations: Silver plated brass. Product Marketing Brand, Ampere Rating, Voltage Rating, UMF Logo Operating Temperature –55 C to 125 C.
PAGE 82
Surface Mount Fuses NANO2® > 250V/350V VAC/VDC Time Lag Fuse > 462 Series 462 Series Fuse PS E RoHS Description The 462 series Nano2® Surface Mount Fuse has time-lag current characteristics with interrupting ratings rated at 250V and 350V. It complies with IEC 60127-4 Universal Modular Fuse-Links.
PAGE 83
Surface Mount Fuses NANO2® > 250V/350V VAC/VDC Time Lag Fuse > 462 Series 462 Series Average Time Current Curves 500mA 630mA 800mA 1.00A 1.25 A 1.60 A 2.00 A 2.50 A 3.15 A 4.00 A 5.00 A Temperature Re-rating Curve 100000 10000 TIME IN SECONDS 1000 100 10 1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.1 0.01 0.001 0.
PAGE 84
Surface Mount Fuses NANO2® > 250V/350V VAC/VDC Time Lag Fuse > 462 Series Product Characteristics Materials Body: Plastic UL 94 V-0 Cap: Tin-plated brass Operating Temperature –40°C to +85°C with proper derating Product Marking Body: Brand Logo, “T” for Time-Lag, Current Rating, L Voltage Rating, UMF logo Climatic Category IEC60068-1, -2-1, -2-2, -2-78 (–40°C to +85°C / 21 days) Solderability IEC 60068-2-58 Reistance to Soldering Heat Vibration IEC 60068-2-58 IEC60068-6 (24 cycles of 15 mins e
PAGE 85
Surface Mount Fuses Nano2® > 600VDC > Fast-Acting Fuse > 485 Series 485 Series Fuse RoHS Description The 485 Nano2® Fuse Series is a small, fast-acting, surface mount ceramic fuse rated at a remarkable 600VDC at its small size and with 100A breaking capacity. It is primarily designed for circuit protection in high energy applications. This product is fully compatible with lead-free solder alloys and higher temperature profiles associated with lead-free assembly.
PAGE 86
Surface Mount Fuses Nano2® > 600VDC > Fast-Acting Fuse > 485 Series 100 2A 2.5A 3.15A 1A Average Time Current Curves 1.5A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.
PAGE 87
Surface Mount Fuses Nano2® > 600VDC > Fast-Acting Fuse > 485 Series Product Characteristics Material Body: Ceramic Cap: Silver Plated Brass Product Marking Body: Brand Logo, Current Rating Operating Temperature -55˚C to 125˚C with proper derating Moisture Sensitivity Level Level 1 J-STD-020 Solderability MIL-STD-202, Method 208 Insulation Resistance (after Opening) MIL-STD-202, Method 302, Test Condition A (10,000 ohms, Minimum) MIL-STD-202, Method 107, Test Condition B, 5 cycles, -65˚C to 125˚
PAGE 88
Surface Mount Fuses Surge Resistant > 461 Series TeleLink® Fuse 461 Series TeleLink® Fuse RoHS Description The Littelfuse 461 Series TeleLink® Surface Mount, Surge Resistant Fuse, offers over-current protection for a wide range of telecom applications without requiring a series resistor.
PAGE 89
Surface Mount Fuses Surge Resistant > 461 Series TeleLink® Fuse Electrical Specifications by Item Ampere Rating (A) Amp Code Max Voltage Rating (V) 0.500 .500 600 1.25 1.25 600 2.00 002. 600 Interrupting Rating Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2sec) 0.560 0.8401 x x .1040 16.51 x x .0450 17.5 x x 50A @ 250 VAC 60 A @600 VAC 100 A @80 VDC 1 I t is calculated at 10 msecs. or less.
PAGE 90
Surface Mount Fuses Surge Resistant > 461 Series TeleLink® Fuse GR 1089 AC power fault 2nd level (fuse can open but must open in a safe and controlled manner) GR 1089 AC power fault 1st level inter-building (fuse not allowed to open) Test 1 2 3 4 5 6 7 8 9 Short Circuit Current (A) 0.33 0.17 Vrms 50 100 200,400, 1 600 1000 1 Diagram Diagram 600 0.5 440 2.2 600 3 1000 5 Primary Fuse Protector Choices Hits Duration 1 1 15 min. 15 min. removed removed 1.25, 2.0 1.25, 2.0 60 1 sec. removed 1.
PAGE 91
Surface Mount Fuses Surge Resistant > 461 Series TeleLink® Fuse Soldering Parameters Pb – free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 120 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) 5°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max.
PAGE 92
Surface Mount Fuses NANO2® > 154 OMNI-BLOK® Fuse and Holder Combination 154/154T/154L/154TL Series OMNI-BLOK® Fuse and Holder Assembly RoHS PS E Description 154/154T (Tan color base like shown in this image) 154L/154TL (Black color base) The RoHS compliant 154 Series OMNI-BLOK® Fuse and Holder Assembly offers a solution for efficient installation and easy replacement of miniature Nano2® surface mount fuses.
PAGE 93
Surface Mount Fuses NANO2® > 154 OMNI-BLOK® Fuse and Holder Combination Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 120 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) 5°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max.
PAGE 94
Surface Mount Fuses NANO2® > 157 Fuse and Holder Combination 157 Series – Standard Nano2® Fuse and Clip Assembly PS E RoHS Description The 157 Series – Standard Nano Fuse/Clip assembly is a small, square, very fast-acting surface mount fuse that is assembled in surface mountable fuse clips. The fuse clip and pre-installed fuse combination can be automatically placed in PC Board in one efficient manufacturing operation.
PAGE 95
Surface Mount Fuses NANO2® > 157 Fuse and Holder Combination Average Time Current Curves 62mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 375mA 400mA 500mA 630mA 750mA 800mA 1A 1.25A 1.5A 1.6A 2A 2.5A 3A 3.15A 3.5A 4A 5A 6.3A 7A 8A 10A Temperature Re-rating Curve 100 10 TIME IN SECONDS 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.01 0.
PAGE 96
Surface Mount Fuses NANO2® > 157 Fuse and Holder Combination Product Characteristics Body: Ceramic Cap: For 0.062A ~ 0.125A – Au plated Brass For 0.200A ~ 10A – Silver plated Brass Clip Plating: Matte Tin Materials Product Marking Body: Brand Logo, Current Rating Clip Retention Force applied at fuse center, perpendicular to the long axis (@ 0.75 lbs.
PAGE 97
Surface Mount Fuses NANO2® > 157T Fuse and Holder Combination 157T Series – Standard Nano2® Fuse and Clip Assembly RoHS PS E Description The 157T Series Fuse/Clip assembly is a small, square, Time-Lag, surface mount fuse that is assembled in surface mountable fuse clips. The unique time delay feature of this fuse design helps solve the problem of nuisance “opening” by accommodating inrush currents that normally cause a fast-acting fuse to open.
PAGE 98
Surface Mount Fuses NANO2® > 157T Fuse and Holder Combination 2.0A 2.5A 3.0A 3.5A 4A 5A .75A 1.0A 1.5A 100 .50A Average Time Current Curves .375A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: 0.01 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.
PAGE 99
Surface Mount Fuses NANO2® > 157T Fuse and Holder Combination Product Characteristics Body: Ceramic Cap: For 0.375A ~ 5A – Silver plated Brass Clip Plating: Matte Tin Materials Product Marking Body: Brand Logo, Current Rating, “T” for Time-Lag Clip Retention Force applied at fuse center, perpendicular to the long axis (@0.75 lbs.
PAGE 100
Surface Mount Fuses 159 Fuse and Clip Series 159 Series Telelink® Fuse and Clip Assembly RoHS Description The 159 Series product is a metal fuse clip with preinstalled Littelfuse 461 Series TeleLink® fuse. This fuse and clip combination can be automatically installed in PC Boards in one efficient manufacturing operation. It permits quick and easy fuse replacement without exposing the PC Board and other components to risks of rework solder heat as required with direct surface mount fuses.
PAGE 101
Surface Mount Fuses 159 Fuse and Clip Series Electrical Specifications by Item Ampere Rating (A) Amp Code Max Voltage Rating (V) 0.50 .500 600 1.25 1.25 600 2.00 002. 600 Interrupting Rating Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2sec) 0.560 0.8401 x .1040 16.51 x .0450 17.5 x 60 A @600 VAC 1 I t is calculated at 10 msecs. or less. I2t at 10 times rated current has a typical value of: 24 A2sec (2.0A), 22 A2sec (1.25A), 1.3 A2sec (0.5A).
PAGE 102
Surface Mount Fuses 159 Fuse and Clip Series GR 1089 Inter-building requirements GR 1089 1st level lighting surge inter-building (Equipment under test can not be damaged and must continue to operate properly) Surge 1 Minimum Minimum Max. Repetitions Peak Peak Rise/Min. Each Voltage Current Decay Polarity (V) (A) (µs) 600 100 10/1000 25 Fuse Choices 1.25, 2.0 2 1000 100 10/360 25 1.25, 2.0 3 1000 100 10/1000 25 1.25, 2.0 4 2500 500 2/10 10 1.25, 2.0 5 1000 25 10/360 5 0.5, 1.25, 2.
PAGE 103
Surface Mount Fuses 159 Fuse and Clip Series Soldering Parameters Pb – free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 120 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) 3°C/second max. TS(max) to TL - Ramp-up Rate 3°C/second max.
PAGE 104
Surface Mount Fuses NANO2® > 160 Fuse and Clip Series 160 Series Fuse and Clip Assembly PS E RoHS Description The 160 Series product is a metal fuse clip with preinstalled Littelfuse 443 Series Fuse. This fuse and clip combination can be automatically installed in PC Boards in one efficient manufacturing operation. It permits quick and easy fuse replacement without exposing the PC Boards and other components to risks of rework solder heat as required with direct surface mount fuses.
PAGE 105
Surface Mount Fuses NANO2® > 160 Fuse and Clip Series 5A 2A 2.5A 3A 3.5A 4A .750A 1A 1.5A Average Time Current Curves .500A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.
PAGE 106
Surface Mount Fuses NANO2® > 160 Fuse and Clip Series Product Characteristics Materials Body: Ceramic Cap: Silver-plated Brass Operating Temperature –55°C to 125°C with proper re-rating Product Marking Brand, Ampere Rating, Voltage Rating, UMF Logo Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 cycles, -65°C to 125°C) Vibration MIL-STD-202, Method 201 (10-55 Hz) Moisture Resistance MIL-STD-202, Method 106, High Humidity (90-98%RH), Heat (65°C) Salt Spray MIL-STD-202, Method 101, Te
PAGE 107
Surface Mount Fuses PICO® SMF Fuse > 459 Series 459 Series PICO® Very Fast-Acting Surface Mount Fuse RoHS PS E Description The 459 Series Very Fast-Acting SMF Fuse is based on Littelfuse PICO® fuse technology, though offered in a surface mount package. This series of devices meets the requirements of the RoHS directive.
PAGE 108
Surface Mount Fuses PICO® SMF Fuse > 459 Series .25A .375A .500A .750A 1A 1.5A 2A 2.5A 3A 3.5A 4A 5A .125A Average Time Current Curves .062A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Re-rating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Soldering Parameters Wave Soldering 260°C, 10 seconds max. Reflow Soldering 260°C, 30 seconds max. Product Characteristics 0.001 0.05 0.
PAGE 109
Surface Mount Fuses PICO® SMF Fuse > 460 Series 460 Series PICO® Slo-Blo® Surface Mount Fuse RoHS PS E Description The 460 Series Slo-Blo® SMF Fuse is based on Littelfuse PICO® fuse through-hole technology, though offered in a surface mount package. This series of devices meet the requirements of the RoHS directive. Features • High inrush current withstand capability • Wide current rating range: 0.
PAGE 110
Surface Mount Fuses PICO® SMF Fuse > 460 Series Average Time Current Curves .375A .500A .750A 1A 1.5A 2A 2.5A 3A 3.5A 4A 5A Temperature Re-rating Curve 1000 100 TIME IN SECONDS 10 Note: 0.1 1. Re-rating depicted in this curve is in addition to the standard derating of 25% for continuous operation. Soldering Parameters 0.01 0.05 Wave Soldering 260°C, 3 seconds max. Reflow Soldering 230°C, 30 seconds max. 1 0.
PAGE 111
Surface Mount Fuses FLAT-PAK® Fast-Acting Fuse > 202 Series 202 Series Fuse Description Fast-Acting and Slo-Blo® Fuse versions of the FlatPak® Fuse designs are available. Both designs are available in either a gull-wing surface mount package or a DIP configuration for through-hole mounting. These fuse designs feature a 250 VAC rating in a low profile, rectangular package. Additional Information Agency Approvals AGENCY AGENCY FILE NUMBER AMPERE RANGE E10480 0.063A - 5A 29862 0.
PAGE 112
Surface Mount Fuses FLAT-PAK® Fast-Acting Fuse > 202 Series 1/2A 3/4A 1A 1 1/2A 2A 2 1/2A 3A 4A 5A 1/4A 1/8A Average Time Current Curves 1/16A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Soldering Parameters Wave Soldering 260°C, 3 seconds max. Reflow Soldering 215°C, 30 seconds max. 0.001 0.05 0.
PAGE 113
Surface Mount Fuses FLAT-PAK® Slo-Blo® Fuse > 203 Series 203 Series Fuse Description Fast-Acting and Slo-Blo® Fuse versions of the Flat-Pak® Fuse designs are available. Both designs are available in either a gull-wing surface mount package or a DIP configuration for through-hole mounting. These fuse designs feature a 250 VAC rating in a low profile, rectangular package. Agency Approvals AGENCY Additional Information AGENCY FILE NUMBER AMPERE RANGE E10480 0.250A - 5A 29862 0.
PAGE 114
Surface Mount Fuses FLAT-PAK® Slo-Blo® Fuse > 203 Series 1/4A 1/2A 3/4A 1A 1 1/2A 2A 2 1/2A 3A 4A 5A Average Time Current Curves Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 .1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Soldering Parameters Wave Soldering 260°C, 3 seconds max. Reflow Soldering 215°C, 30 seconds max. 0.001 0.05 0.
PAGE 115
Surface Mount Fuses EBF Fuse Fast-Acting > 446/447 Series 446/447 Series EBF Fuse Fast-Acting RoHS Pb Description 446 Series (surface mount leads) 447 Series (thru-hole leads) The 446/447 series are circuit-board mountable, flat profile, fast-acting fuses designed for protection of electronic ballasts and power inverter applications. The 446 series is designed with leads for surface mount applications, and the 447 series is designed with leads for through-hole applications.
PAGE 116
Surface Mount Fuses EBF Fuse Fast-Acting > 446/447 Series Average Time Current Curves 2A 3A 4A 5A 7 1/2A 10A Temperature Re-rating Curve 1000 TIME IN SECONDS 100 10 1 0.1 Note: 1. Re-rating depicted in this curve is in addition to the standard re-rating of 25% for continuous operation. 0.01 Soldering Parameters 446 Series: Reflow Solder — 235°C, 5 seconds maximum. No-clean process recommended. Wave Solder — Not recommended. Non-plated terminal surfaces may not meet MIL-STD-202, Method 208.
PAGE 117
Radial Lead Fuses MICRO™ > Very Fast-Acting Fuse > 262/268/269 Series QPL 262/268/269 Series, MICRO™ Very Fast-Acting Fuse (High-Reliability) Description The 262/268/269 Series are high–reliability MICROTM fuses, with a 125V rating, very fast-acting type with high breaking capacity. The 269 series is listed under the Department of Defense Quality Product List. Features • Military grade available • Available in plug-in and radial leaded • Available from very low ampere of 0.
PAGE 118
Radial Lead Fuses MICRO™ > Very Fast-Acting Fuse > 262/268/269 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Cooling Tim
PAGE 119
Radial Lead Fuses MICRO™ > Very Fast-Acting Fuse > 262/268/269 Series Product Characteristics Materials Gold-Plated Copper Leads, Type II (Fuse cap is also Gold-Plated) Weight 262 and 269 Series .36 Grams; 268 Series .48 Grams Lead Pull Force MIL-STD-202, Method 211, Test Condition A (will withstand a 5 lb.
PAGE 120
Radial Lead Fuses MICRO™ > Very Fast-Acting Fuse > 272/273/274/278/279 Series QPL 272/273/274/278/279 Series, MICRO™ Very Fast-Acting Fuse Description Developed originally for the U.S. Space Program, MICRO™ fuse provides reliability in a compact design. The MICRO™ fuse is available in plug–in or radial lead styles and a complete range of ampere ratings from 0.002A to 5A to suit a wide variety of design needs.
PAGE 121
Radial Lead Fuses MICRO™ > Very Fast-Acting Fuse > 272/273/274/278/279 Series 1/2 A 3/4 A 1A 1 1/2 A 2A 3A 4A 5A 1/4 A 1/8 A 1/16 A 1/32 A 100 1/100 A 1/64 A Average Time Current Curves 1/200 A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for 0.01 continuous operation. 0.001 0.005 0.01 0.
PAGE 122
Radial Lead Fuses MICRO™ > Very Fast-Acting Fuse > 272/273/274/278/279 Series Dimensions Product Characteristics Operating Temperature: 273 and 279: –55ºC to +85ºC; 272 and 278: –55ºC to +125ºC Fuses to MIL SPEC Military QPL type (FM02). To order, change 273 to 274.
PAGE 123
Radial Lead Fuses TR3 > Fast-Acting Fuse > 303 Series 303 Series, TR3, Fast-Acting Fuse RoHS Pb Description The 303 Series are TR3, fast-acting type, 125V rated fuses designed in accordance to UL 248–14. Features • Reduced PCB space requirements • Vibration resistant • RoHS compliant, Lead- • Direct solderable or plug-in versions Free and Halogen-Free • Internationally approved Agency Approvals Agency • Available from 0.
PAGE 124
Radial Lead Fuses TR3 > Fast-Acting Fuse > 303 Series FAST ACTING DE-RATING CURVE 0.630A 0.800A 1A 1.25A 1.60A 2A 2.50A 3A 3.15A 4A 5A 1000 0.400A 0.500A 140 0.125A 0.160A 0.200A 0.250A 0.315A Average Time Current Curves 0.050A 0.063A 0.080A 0.100A Temperature Re-rating Curve PERCENT OF RATING 120 100 100 80 60 23°C 40 10 TIME IN SECONDS 20 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE (°C) Note 1.
PAGE 125
Radial Lead Fuses TR3 > Fast-Acting Fuse > 303 Series Product Characteristics Base/Cap: Black Thermoplastic Base Polyamide PA 6.6, UL 94V-0 Brass, Nickel-plated Cap Round Pins: Copper alloy, Tin–plated Materials Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 126
Radial Lead Fuses TR5® > Fast-Acting Fuse > 370 Series 370 Series, TR5 Fuse, Fast Acting RoHS Pb PS E Description The 370 Series are sub-miniature TR5® fuses, fast acting type, 250V rated fuses, designed in accordance to IEC 60127-3.
PAGE 127
Radial Lead Fuses TR5® > Fast-Acting Fuse > 370 Series Electrical Characteristics Amp Code Rated Current Voltage Rating 0040 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 40mA 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.
PAGE 128
Radial Lead Fuses TR5® > Fast-Acting Fuse > 370 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 Lead-Free Recommendation 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 100 80 60 40 Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 (Typical Industry Recommendation) Temperature Minimum: 100°C Tempe
PAGE 129
Radial Lead Fuses TR5® > Time-Lag Fuse > 372 Series 372 Series, TR5 Fuse, Time Lag RoHS Pb PS E Description The 372 Series are TR5® Fuses, Time-Lag type, 250V rated fuses, that are designed in accordance to IEC 60127-3. Features • Halogen free, Lead-free and RoHS compliant • Internationally approved • Reduced PCB space requirements • Shock safe casing • Vibration resistant • Direct solderable or plug-in versions • Available from 0.040A to 6.
PAGE 130
Radial Lead Fuses TR5® > Time-Lag Fuse > 372 Series Electrical Characteristics Amp Code Rated Current Voltage Rating 0040 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 40mA 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.
PAGE 131
Radial Lead Fuses TR5® > Time-Lag Fuse > 372 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 80 Recommended Hand-Solder Parameters: 240 230
PAGE 132
Radial Lead Fuses TR5® > Fast-Acting Fuse > 373 Series 373 Series, TR5 Fuse, Fast Acting Pb RoHS Description The TR5® 373 Series fuses are fast–acting 250V rated and designed in accordance to UL 248 –14. Features • Reduced PCB space requirements • Vibration resistant • Lead-free, Halogen free and RoHS compliant • Direct solderable or plug-in versions • Internationally approved • Available from 0.
PAGE 133
Radial Lead Fuses TR5® > Fast-Acting Fuse > 373 Series Average Time Current Curves 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 8.00A 10.00A Temperature Re-rating Curve 140 100000 PERCENT OF RATING 120 100 80 10000 60 23°C 40 1000 20 -40 -20 0 20 40 60 TIME IN SECONDS 0 80 AMBIENT TEMPERATURE (°C) Note 1.
PAGE 134
Radial Lead Fuses TR5® > Fast-Acting Fuse > 373 Series Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Materials Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 135
Radial Lead Fuses TR5® > Time-Lag Fuse > 374 Series 374 Series, TR5 Fuse, Time Lag RoHS Pb Description The TR5® 374 Series fuses are Time–Lag 250V rated and designed in accordance to UL 248 –14. Features • Halogen free, Lead-free and RoHS compliant • Internationally approved • Reduced PCB space requirements • Shock safe casing • Vibration resistant • Direct solderable or plug–in versions • Available from 0.050A to 10A Agency Approvals Agency Agency File Number Ampere Range 51378 0.050A - 6.
PAGE 136
Radial Lead Fuses TR5® > Time-Lag Fuse > 374 Series Electrical Characteristics Amp Code Rated Current Voltage Rating 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 1800 2100 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 8.00A 10.
PAGE 137
Radial Lead Fuses TR5® > Time-Lag Fuse > 374 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 Lead-Free Recommendation 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds 120 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 240 23
PAGE 138
Radial Lead Fuses TR5® > Time-Lag Fuse > 382 Series 382 Series, TR5® Fuse, Time-Lag RoHS PS E Pb Description The 382 Series are TE5 Time-Lag type Fuses, 250V rated, with enhanced breaking capacity and designed in accordance to IEC 60127-3.
PAGE 139
Radial Lead Fuses TR5® > Time-Lag Fuse > 382 Series Electrical Characteristics Amp Code Rated Current Voltage Rating Breaking Capacity Nominal Cold Resistance (Ohms) Voltage Drop 1.0×IN max. (mV) Power Dissipation 1.5×IN max. (mW) Melting Integral 10×IN min. (A2s) Agency Approvals PS E 1100 1.00 A 250 V 0.0625 100 400 4.85 X X X X X X 1125 1.25 A 250 V 0.0500 95 465 6.88 X X X X X X 1160 1.60 A 250 V 0.0377 90 490 12.67 X X X X X X 1200 2.00 A 250 V 0.
PAGE 140
Radial Lead Fuses TR5® > Time-Lag Fuse > 382 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: Wave Parameter 280 260 Lead-Free Recommendation 240 Preheat: 220 (Depends on Flux Activation Temperature) (Typical Industry Recommendation) 200 Temperature Minimum: 100°C 180 Temperature Maximum: Preheat Time: 150°C 60-180 seconds 160 140 120 100 80 60 40 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 240 230
PAGE 141
Radial Lead Fuses TR5® > Time-Lag Fuse > 383 Series 383 Series, TR5® Time-Lag Fuse RoHS Pb PS E Description The 383 series are TR5® time-lag 300V rated fuses and designed in accordance to IEC60127-3.
PAGE 142
Radial Lead Fuses TR5® > Time-Lag Fuse > 383 Series Temperature Re-rating Rerating Curve Temperature Average Time Current Curves 10A 8A 6.3A 5A 4A 3.15A 2.5A 2A 1.6A 1.25A 1A 140 140 100000 100 100 10000 80 80 60 60 1000 40 40 23°C 23°C 20 20 100 0 0-40°C -40 -20°C -20 0°C 0 20°C 20 40°C 40 60°C 60 TIME IN SECONDS PERCENT OFOF RATING PERCENT RATING 120 120 80°C 80 AMBIENT TEMPERATURE(°C) AMBIENT TEMPERATURE Note: 1.
PAGE 143
Radial Lead Fuses TR5® > Time-Lag Fuse > 383 Series Product Characteristics Characteristics Materials Materials Base/Cap: Brown Thermoplastic Thermoplastic Polyamide PAV0 6.6, UL 94 V-0 Polyamide PA6.6, UL 94 Round Pins: tin-plated Copper, Tin-plated Copper LeadPull PullStrength Strength Lead 10 N 10 N (IEC (IEC 60068-2-21) 60068-2-21) Solderability Solderability 260ºC, ≤ (Wave) 260°C, ≤ 3s. 3s (Wave) 350ºC, ≤ (SolderingIron) Iron) 350°C, ≤ 1s.
PAGE 144
Radial Lead Fuses TE5® > Time-Lag Fuse > 369 Series 369 Series, TE5® Time-Lag Fuse RoHS Pb PS E Description The 369 Series are TE5® Time-Lag Fuses, 300V rated and designed in accordance to IEC 60127-3. Features PS E Agency File Number Ampere Range E67006 0.800A - 6.3A JET 1896-31007-2002 1A - 5A 1605793 1A - 6.3A 40037351 1A, 1.6A - 2A, 3.15A - 6.
PAGE 145
Radial Lead Fuses TE5® > Time-Lag Fuse > 369 Series Temperature Re-rating Curve Average Time Current Curves 6.3A 5A 4A 3.15A 1A 100000 2A 1.6A .800A 140 PERCENT OF RATING 120 100 10000 80 1000 60 40 23°C 100 TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 10 1 0.1 0.01 0.001 0.
PAGE 146
Radial Lead Fuses TE5® > Time-Lag Fuse > 369 Series Product Characteristics Characteristics Materials Materials Base/Cap: Brown Thermoplastic Black/Brown Thermoplastic 6.6, UL 94 V0 Polyamide Polyamide PA6.6, UL PA 94 V0 Round Pins: Tin-plated Copper LeadPull PullStrength Strength Lead 10NN(IEC 10 (IEC60068-2-21) 60068-2-21) Solderability Solderability 260ºC, ≤ (Wave) 260°C, ≤ 3s. 3s (Wave) 350ºC, ≤ (SolderingIron) Iron) 350°C, ≤ 1s.
PAGE 147
Radial Lead Fuses TE5® > Transient Tolerant Fuse > 385 Series 385 Series, TE5® Telecom Interface Protector Fuse RoHS Pb Description The 385 Series TE5R Telecom Interface Protector Fuses are 125V rated, Time-Lag type and designed in accordance to UL 248-14. Features Agency Approvals Agency • Surge proof for telecom applications • Irreversible physical separation • Reduced PCB space requirements • Flame resistant encapsulated casing • Highly defined cut-off times • Available from 0.350A to 1.
PAGE 148
Radial Lead Fuses TE5® > Transient Tolerant Fuse > 385 Series 0.500A 0.350A 140 0.800A 1.00A 1.25A 1.50A Average Time Current Curves Temperature Re-rating Curve 100000 PERCENT OF RATING 120 100 10000 80 60 1000 40 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.100 0.010 0.001 0.
PAGE 149
Radial Lead Fuses TE5® > Transient Tolerant Fuse > 385 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 150
Axial Lead & Cartridge Fuses TE5® > Slow-Blo Fuse > 389 Series 389 Series, TE5®, Slow-Blo RoHS Pb Description The 389 Series is a TE5, Slow-Blo type fuse designed for overcurrent protection of sensitive electronic components and assemblies. Features • For worldwide applications • Low internal resistance • Flame resistant encapsulated casing • Reduced PCB space requirements • Highly defined cut-off times Agency Approvals Agency Agency File Number Ampere Range E67006 0.
PAGE 151
Axial Lead & Cartridge Fuses TE5® > Slow-Blo Fuse > 389 Series Temperature Re-rating Curve Average Time Current Curves 100000 10000 TIME IN SECONDS 1000 100 10 1 0.100 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.010 0.001 0.010 0.
PAGE 152
Axial Lead & Cartridge Fuses TE5® > Slow-Blo Fuse > 389 Series Product Characteristics Materials Base/Cap: Black/Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin–plated Lead Pull Strength 10N (IEC 60068-2-21) Solderability 260ºC, ≤ 3 sec. (Wave) 350ºC, ≤ 1 sec. (Hand) Soldering Heat Resistance 260ºC, 10 sec. (IEC 60068-2-20) Dimensions Operating Temperature –40ºC to +85ºC (consider de-rating) Climatic Category –25ºC/+70ºC/21 days (IEC 60068-1..
PAGE 153
Radial Lead Fuses TE5® > Fast Acting Fuse > 391 Series 391 Series, TE5® Fast-Acting Fuse RoHS Pb Description The 391 Series are TE5® short circuit protector, fast-acting type, 65V rated fuses. For Short Circuit Protection of Sensitive Electronic Components and Assemblies. Features Agency Approvals Agency • For worldwide applications • Flame resistant encapsulated casing • Reduced PCB space requirements • RoHS compliant and Lead-free • Highly defined cut-off times • Available from 0.125A to 4A.
PAGE 154
Radial Lead Fuses TE5® > Fast Acting Fuse > 391 Series 140 100000 120 PERCENT OF RATING 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A Average Time Current Curves 0.125A 0.160A 0.200A Temperature Re-rating Curve 100 10000 80 60 1000 23°C 40 TIME IN SECONDS 20 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.100 0.010 0.
PAGE 155
Radial Lead Fuses TE5® > Fast Acting Fuse > 391 Series Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin-plated Materials Lead Pull Strength 10 N (EN 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 156
Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series 392 Series, TE5 Time-Lag Fuse RoHS Pb PS E Description TE5 Fuse, Time-Lag type, 250V rated, designed in accordance to IEC 60127-3. Features • • • • • Reduced PCB space requirements • Direct solderable or plug-in versions • Internationally approved Applications Agency Approvals Agency Agency File Number PS E Low internal resistance Shock safe casing Vibration resistant Halogen free, Lead-free and RoHS compliant Ampere Range 126983 0.28A - 6.
PAGE 157
Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series 140 100000 120 PERCENT OF RATING 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A Average Time Current Curves 0.280A Temperature Re-rating Curve 100 10000 80 60 40 1000 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.1 0.01 0.001 0.
PAGE 158
Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3 sec. (Wave) 350ºC, ≤ 3 sec. (Soldering iron) Soldering Heat Resistance 260ºC, 10 sec. (IEC 60068-2-20) 350ºC, ≤ 3 sec.
PAGE 159
Radial Lead Fuses TE5® > Fast-Acting Fuse > 395 Series 395 Series, TE5® Fast-Acting Fuse Pb PS E RoHS Description The 395 Series TE5® Fuses are fast-acting type, 125V and are designed in accordance to UL 248-14. Features • RoHS compliant and Lead-free • Low internal resistance • Reduced PCB space requirements • Vibration resistant • Shock safe casing • Halogen Free • Direct solderable or plug-in versions • Internationally approved Agency Approvals Agency PS E • Available from 0.05A to 6.
PAGE 160
Radial Lead Fuses TE5® > Fast-Acting Fuse > 395 Series 100000 120 PERCENT OF RATING 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 140 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A Average Time Current Curves 0.050A 0.063A 0.080A Temperature Re-rating Curve 100 10000 80 60 23°C 40 1000 20 -40 -20 0 20 40 60 TIME IN SECONDS 0 80 AMBIENT TEMPERATURE (°C) Note: 1.
PAGE 161
Radial Lead Fuses TE5® > Fast-Acting Fuse > 395 Series Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Materials Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 162
Radial Lead Fuses TE5® > Time-Lag Fuse > 396 Series 396 Series, TE5® Time-Lag Fuse RoHS Pb PS E Description The 396 Series TE5® fuses are time-lag type, 125V rated, and are designed in accordance to UL 248-14. Features PS E • Internationally approved • Reduced PCB space requirements • Shock safe casing Agency File Number Ampere Range E67006 0.05A - 6.3A E67006 0.05A - 6.
PAGE 163
Radial Lead Fuses TE5® > Time-Lag Fuse > 396 Series 140 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 0.630A 0.800A 0.250A 0.315A 0.400A 0.500A Average Time Current Curves 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A Temperature Re-rating Curve 100000 PERCENT OF RATING 120 100 10000 80 60 1000 40 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1.
PAGE 164
Radial Lead Fuses TE5® > Time-Lag Fuse > 396 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 165
Radial Lead Fuses TE5 > Transient Tolerant Fuse > 397 Series 397 Series, TE5 Transient Tolerant Fuse RoHS Pb Description The 397 Series TE5 Fuses are SLO BLO® type, 125V rated and designed in accordance to UL248-14. Features • Surge Proof for telecom applications • Reduced PCB space requirements Agency • Lead-free, Halogen free and RoHS compliant • Available from 0.35A to 1.
PAGE 166
Radial Lead Fuses TE5 > Transient Tolerant Fuse > 397 Series 140 0.800A 1.00A 1.25A 1.50A 0.500A Average Time Current Curves 0.350A Temperature Re-rating Curve 100000 PERCENT OF RATING 120 100 10000 80 60 1000 40 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.100 0.010 0.001 0.
PAGE 167
Radial Lead Fuses TE5 > Transient Tolerant Fuse > 397 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 168
Radial Lead Fuses TE5® > Medium Time-Lag Fuse > 398 Series 398 Series, TE5® Modul Protector® Fuse RoHS Pb Description The 398 Series TE5® Fuses are short circuit protectors, medium Time-Lag type, and 65V rated. Features Agency Approvals Agency • Reduced PCB space requirements • Flame resistant encapsulated casing • Highly defined cut-off times • Available from 0.
PAGE 169
Radial Lead Fuses TE5® > Medium Time-Lag Fuse > 398 Series 140 100000 120 PERCENT OF RATING 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A Average Time Current Curves 0.125A Temperature Re-rating Curve 100 10000 80 60 40 1000 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.100 0.010 0.001 0.
PAGE 170
Radial Lead Fuses TE5® > Medium Time-Lag Fuse > 398 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10N (EN 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 171
Radial Lead Fuses TE5® > Time-Lag Fuse > 399 Series 399 Series, TE5® Inrush Protector Fuse RoHS Pb Description The 399 Series TE5 Fuses are Time-Lag type, and are 65V rated. For Short Circuit Protection of Sensitive Electronic Components and Assemblies. Features • Reduced PCB space requirements • Lead-free, Halogen free and RoHS Compliant • Highly defined cut-off times • Available from 0.125A to 4A • Low internal resistance Agency Approvals Agency Agency File Number Ampere Range E67006 0.
PAGE 172
Radial Lead Fuses TE5® > Time-Lag Fuse > 399 Series Average Time Current Curves 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A Temperature Re-rating Curve 140 100000 PERCENT OF RATING 120 100 10000 80 60 1000 40 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.100 0.010 0.001 0.
PAGE 173
Radial Lead Fuses TE5® > Time-Lag Fuse > 399 Series Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin-plated Materials Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 174
Radial Lead Fuses TE5® Fuse > Time-Lag Fuse > 400 Series 400 Series, TE5® Fuse, Time-Lag RoHS PS E Pb Description The 400 Series TE5® Fuse is a Time-Lag type subminiature fuse and designed for overcurrent protection. It is 250V rated and designed in accordance to IEC 60127-3.
PAGE 175
Radial Lead Fuses TE5® Fuse > Time-Lag Fuse > 400 Series Average Time Current Curves 0.5A 0.8A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A Temperature Re-rating Curve DE-RATING CURVE 140 100 100 80 60 10 23°C 40 TIME IN SECONDS PERCENT OF RATING 120 20 0 -40 -20 0 20 40 60 80 1 AMBIENT TEMPERATURE (°C) 0.1 Note 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.
PAGE 176
Radial Lead Fuses TE5® Fuse > Time-Lag Fuse > 400 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide, UL 94 V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 177
Radial Lead Fuses TE > Time-Lag Fuse > 804 Series 804 Series Fuse, TE, Time-Lag Fuse RoHS PS E Pb Description The 804 Series is a TE Universal Modular Fuse (UMF), TT time-lag type subminiature fuse designed for overcurrent protection. It is 250V rated and designed in accordance to IEC 60127-4.
PAGE 178
Radial Lead Fuses TE > Time-Lag Fuse > 804 Series 804 DE-RATING CURVE Average Time Current Curves 0.8A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 804 RE-RATING CURVE 140% 1000.000 6.3A Temperature Re-rating Curve PERCENT OF RATING 120% 100% 100.000 80% 60% 40% 10.000 Blowtime [sec]. 20% 0% -55 -30 -5 20 45 70 95 120 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1.000 0.100 0.010 0.001 0.
PAGE 179
Radial Lead Fuses TE > Time-Lag Fuse > 804 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide, UL 94V-0 Round Pins: Copper, Sn Plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s.
PAGE 180
Radial Lead Fuses TE5® > Fast Acting 450V Fuse > 808 Series 808 Series TE5® Fast-Acting 450V Fuse RoHS PS E Pb Description The 450V TE5® Fast-acting Fuse is designed to enable compliance with the RoHS Directive. This product is fully compatible with lead-free solder alloy. This device is UL Recognized for protecting components or internal circuits against overcurrent conditions at high DC voltages. Features Agency Approvals Agency Agency File Number Ampere Range PS E NBK060111-JP1021A 2.00A - 5.
PAGE 181
Radial Lead Fuses TE5® > Fast Acting 450V Fuse > 808 Series Temperature Re-rating Curve Average Time Current Curves 2.00A 2.50A 3.00A 3.15A 4.00A 5.00A 140 1000 120 PERCENT OF RATING 100 80 100 23°C 60 40 20 0 -80 -60 -40 -20 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 20% for continuous operation. TIME IN SECONDS 10 1 0.1 0.01 0.
PAGE 182
Radial Lead Fuses TE5® > Fast Acting 450V Fuse > 808 Series Product Characteristics Materials Base/Cap: Black Thermoplastic Polyphenylene Sulfide, UL 94 V-0 Round Pins: Copper, Sn-plated Operating Temperature -65ºC to +125ºC (Consider re-rating) Product Marking Body: Brand Logo, Current Rating Rated Voltage, Characteristic “F” Moisture Resistance 10 cycles, 65°C at 90-98% R.H.
PAGE 183
Radial Lead Fuses TE7 > Time-Lag Fuse > 807 Series 807 Series Fuse Pb RoHS PS E Description TE7 807 Series is a time-lag type subminiature fuse designed for overcurrent protection.
PAGE 184
Radial Lead Fuses TE7 > Time-Lag Fuse > 807 Series Average Time Current Curves 0.8A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 807 RE-RATING CURVE 140% 1000.000 6.3A Temperature De-rating Curve PERCENT OF RATING 120% 100% 100.000 80% 60% 40% 10.000 Blowtime [sec]. 20% 0% -55 -30 -5 20 45 70 95 120 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1.000 0.100 0.010 0.001 0.
PAGE 185
Radial Lead Fuses TE7 > Time-Lag Fuse > 807 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide, UL 94V-0 Round Pins: Copper, Sn Plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260˚C, ≤ 3s (Wave) 350˚C, ≤ 1s (Soldering Iron) Soldering Heat Resistance 260˚C, 10s (IEC 60068-2-20) 350˚C, 3s (Soldering Iron) Operating Temperature -40˚C to +125˚C (Consider re-rating) Climatic Category -40˚C/+85˚C/21 days (IEC 60068-1, -2-1, -2-2, -2-78) Stock Conditions +1
PAGE 186
Radial Leaded Fuse Holders 281/282 Series Panel Mount Holders for MICROTM/TR3 Fuses 281 Series Panel Mount Product Characteristics Front of Panel Mounting with Push-On / Rear Retaining Nut Dimensions Compatible Fuses MICROTM/TR3 Description Panel mount holder designed for Littelfuse MICRO™/ TR3 type and other fuse series with .025” diameter leads rated to 5 amps Electrical Specs Rated at 5 amperes for any voltage up to 125 Mounting Specs Maximum panel thickness is .09” Ambient Temp.
PAGE 187
Radial Leaded Fuse Holders Ordering Information Additional Information Ordering Number 02810001H Ordering Information Datasheet 281 Series Resources 281 Series Samples 281 Series Datasheet 282 Series Resources 282 Series Samples 282 Series Ordering Number Rear Mounting Front Mounting (Threaded Knurled Nut) (Threaded Hex Nut) 02820002Z 02820001Z Neoprene 02820008Z 02820007Z Conductive Silicone Gasket Type Note: These products are shipped unassembled and without fuse device Disclaimer N
PAGE 188
Radial Leaded Fuse Holders 281/556/557 Series Thru-Hole Circuit Board Mount Holders for MicroTM/TR-3 Fuses 281 Series PC Mount - Vertical 281 Series PC Mount - Horizontal Product Characteristics 281 Series Vertical Compatible Fuses 557 Series PC Mount - Horizontal Note: These products are shipped without fuse device Dimensions units in inch (mm) 0281 0005H, 0281 0008H White / Vertical Mount Devices .25˝ .046˝ TYP. .23˝ .18˝ .10˝ .020˝ .23˝ .
PAGE 189
Radial Leaded Fuse Holders 570/571/576 Series Fuse Holders with Cap for TE5/TR5 Type Fuses RoHS Pb Product Characteristics 570 Series Compatible Fuses 575 Cap 571 Series 576 Series TR5/TE5 Holder: Black Thermoplastic, UL 94 V-0 Materials Cap: Transparent Thermoplastic Polycarbonat PC, UL94 V-0 Metal Parts: Copper alloy Solderable tinned 250V Rated Voltage 571 and 576 Holder 570 Holder Max. Current/ Power: Agency File Number 570 Series 571 Series 576 Series E14721 N/A N/A 40024733 6.
PAGE 190
Radial Leaded Fuse Holders 562/564 Series Circuit Board Mount Holders for TE5/TR5 Type Fuses RoHS Product Characteristics 562 Series Compatible Fuses Materials Electrical Data (23ºC) 564 Series Holder 562 Series Holder 564 Series TR5/TE5 Holder: Black Thermoplastic, UL94 V-0 PET Terminals: Copper alloy; solderable tinned Rated Voltage: 250V Max. Current/Power: 6.3A/1.6W Mounting PC Board, 5.08mm pin spacing PC Board, 5.08mm pad spacing Minimum Cross Section Conducting path 0.
PAGE 191
Radial Leaded Fuse Holders 559/560 Series Fuse Holders for TE5/TR5 Type Fuses RoHS Product Characteristics Compatible Fuses Materials 559 Series (Lead Free) 560 Series TR5/TE5 TR5/TE5 Holder: Black Thermoplastic, UL94 V-0 Holder: T hermoplastic, UL 94 V-0 Metal Parts: Copper alloy; solderable tinned 560 Series Holder 559 Series Holder Agency Approvals Agency File Number Agency Dimensions 559 Series 560 Series N/A 40041024 N/A E14721 units in mm 559 Series 3.8 7.18 1.2 R0. 3 1±0.
PAGE 192
Axial Lead & Cartridge Fuses PICO® ll > Very Fast-Acting Fuse > 251/253 Series 251/253 Series, PICO® II Very Fast-Acting Fuse PS E QPL Description The PICO® II Very Fast-Acting Fuse is designed to meet an extensive array of performance characteristics in a space-saving subminiature package. Features • Very fast-acting • Halogen-free available • Small size • Wide operating temperature range • Wide current rating range (0.
PAGE 193
Axial Lead & Cartridge Fuses PICO® ll > Very Fast-Acting Fuse > 251/253 Series Electrical Specifications by Item Agency Approvals Nom Max Nominal Ampere Nominal Ordering Ordering Voltage Amp Voltage Interrupting Cold Rating Melting Number Number Drop Code Rating Rating Resistance 2 (A) I t (A2 sec) (Std.) (Mil.) (V) (V) (Ohms) .062 .125 .200 .250 .375 .500 .630 .750 1.00 1.25 1.50 2.00 2.50 3.00 3.50 4.00 5.00 7.00 10.0 12.0 15.0 .062 .125 .200 .250 .375 .500 .630 .750 001. 1.25 01.5 002. 02.5 003. 03.
PAGE 194
Axial Lead & Cartridge Fuses PICO® ll > Very Fast-Acting Fuse > 251/253 Series .250A .375A .500A .630A .750A 1A 1.25A 1.5A 2A 2.5A 3A 3.5A 4A 5A 7A 10A 12A 15A 100 .125A Average Time Current Curves .062A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: 1. Re-rating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Soldering Parameters Recommended Process Parameters: Wave Parameter Lead-Free Recommendation for 251 Series only 0.001 0.
PAGE 195
Axial Lead & Cartridge Fuses PICO® ll > Very Fast-Acting Fuse > 251/253 Series Product Characteristics Vibration MIL-STD-202, Method 201 (10–55 Hz); Method 204, Test Condition C (55–2000 Hz at 10 G’s Peak) MIL-STD-202, Method 211, Test Condition A (will withstand a 7lbs. axial pull test) Shock MIL-STD-202, Method 213, Test Condition I (100 G’s peak for 6 msecs.
PAGE 196
Axial Lead & Cartridge Fuses PICO® > Very Fast-Acting Fuse > 275 Series 275 Series, PICO® Very Fast-Acting Fuse RoHS Description The PICO® Very Fast-Acting Fuse is designed to meet an extensive array of performance characteristics in a space-saving subminiature package.
PAGE 197
Axial Lead & Cartridge Fuses PICO® > Very Fast-Acting Fuse > 275 Series Average Time Current Curves 20A 25A 30A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.
PAGE 198
Axial Lead & Cartridge Fuses PICO® > Very Fast-Acting Fuse > 275 Series Product Characteristics Materials Transparent Polyvinylidene Fluoride sleeve covered body, pure tin plated copper wire leads Operating Temperature –55ºC to +125ºC (Consider re-rating) Solderability MIL-STD-202, Method 208 Shock Lead Pull Force MIL-STD-202, Method 211, Test Condition A (will withstand a 5lbs.
PAGE 199
Axial Lead & Cartridge Fuses PICO® ll Fuse > Very Fast-Acting Fuse > 263 Series 263 Series, PICO® II 250 Volt Fuse, Very Fast Acting RoHS PS E Description The PICO® II 263 Series Fuse is a specially designed axial leaded fuse that achieves a 250V rating in a small package. Features • 250V rating • Very fast–acting • Small size • Wide range of current rating available (62mA to 5A) Agency Approvals Agency PS E Agency File Number Ampere Range E10480 0.
PAGE 200
Axial Lead & Cartridge Fuses PICO® ll Fuse > Very Fast-Acting Fuse > 263 Series 3/8A 1/2A 3/4A 1A 1 1/2A 2A 2 1/2A 3A 3 1/2A 4A 5A 1/4A 1/8A Average Time Current Curves 1/16A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 Soldering Parameters Recommended Process Parameters: Wave Parameter 0.001 0.05 0.
PAGE 201
Axial Lead & Cartridge Fuses PICO® ll Fuse > Very Fast-Acting Fuse > 263 Series Product Characteristics Materials Encapsulated, Epoxy-Coated Body: Solder Coated Copper Leads. RoHS compliant Product: Pure Tin–coated Copper wire leads Solderability MIL-STD-202. Method 208.
PAGE 202
Axial Lead & Cartridge Fuses PICO® ll > Time-Lag Fuse > 471 Series 471 Series, PICO® II Time-Lag Fuse RoHS PS E Description The 471 Series PICO® II Time-Lag Fuse is designed for applications that require moderate in–rush withstand and is in a space-saving subminiature package. Features PS E • RoHS compliant • Small size • Wide operating temperature range • Halogen-free available • Wide range of current ratings available (0.
PAGE 203
Axial Lead & Cartridge Fuses PICO® ll > Time-Lag Fuse > 471 Series 100 1A 1.5A 2A 2.5A 3A 4A 5A Average Time Current Curves 0.5A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.1 Soldering Parameters Recommended Process Parameters: Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) 0.
PAGE 204
Axial Lead & Cartridge Fuses PICO® ll > Time-Lag Fuse > 471 Series Product Characteristics Encapsulated, Epoxy-Coated Body; Solder Coated Copper wire leads; RoHS compliant Product: Pure Tin-coated Copper wire leads Materials Flammability Rating UL 94V-0 Solderability MIL-STD-202, Method 208 Lead Pull Force MIL-STD-202, Method 211, Test Condition A (will withstand a 7 lbs.
PAGE 205
Axial Lead & Cartridge Fuses PICO® ll > Slo-Blo® Fuse > 472 Series 472 Series, PICO® II Slo-Blo® Fuse RoHS Description The 472 Series PICO® II, 125V rated Slo-Blo® Fuse is designed for applications that require moderate in-rush withstand and is in a space-saving subminature package. Features • RoHS compliant and Halogen-free • Small size • Wide operating temperature range • Wide range of current ratings available (0.
PAGE 206
Axial Lead & Cartridge Fuses PICO® ll > Slo-Blo® Fuse > 472 Series 5.0A 100 1.0A 1.5A 2.0A 2.5A 3.0A Average Time Current Curves 0.5A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. Soldering Parameters 0.001 0.1 Recommended Process Parameters: Wave Parameter 0.
PAGE 207
Axial Lead & Cartridge Fuses PICO® ll > Slo-Blo® Fuse > 472 Series Product Characteristics Material Body: Ceramic Leads: Tin-coated Copper Encapsulated: Epoxy-Coated Body Product Marking Body: Brand Logo, Current Rating, T (time-lag fuse) Solderability MIL-STD-202, Method 208 Lead Pull Force MIL-STD-202, Method 211, Test Condition A (will Withstand a 7lbs.
PAGE 208
Axial Lead & Cartridge Fuses PICO® ll > Slo-Blo® Fuse > 473 Series 473 Series, PICO® II Slo-Blo® Fuse PS E RoHS Description The PICO® II Slo-Blo® Fuse combines time-delay performance characteristics with the proven reliability of a PICO® Fuse. Features • Enhanced inrush withstand • Halogen free and RoHS complaint • Small size • Wide operating temperature range • Wide range of current ratings (0.
PAGE 209
Axial Lead & Cartridge Fuses PICO® ll > Slo-Blo® Fuse > 473 Series Average Time Current Curves .375A .50A .75A 1.0A 1.5A 2.0A 2.5A 3.0A 3.5A 4.0A 5.0A 7.0A Temperature Re-rating Curve 1000 TIME IN SECONDS 100 10 1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.
PAGE 210
Axial Lead & Cartridge Fuses PICO® ll > Slo-Blo® Fuse > 473 Series Product Characteristics Materials Encapsulated, Epoxy-Coated Body; Solder Coated Copper wire leads; RoHS compliant Product: Pure Tin-coated Copper wire leads Vibration MIL-STD-202, Method 201 (10–55 Hz); MIL-STD-202, Method 204, Test Condition C (55–2000 Hz at 10 G’s Peak) Solderability MIL-STD-202, Method 208 Salt Spray Lead Pull Force MIL-STD-202, Method 211, Test Condition A (will withstand 7 lbs.
PAGE 211
Axial Lead & Cartridge Fuses PICO® > Very Fast Acting Fuse > 265/266/267 Series 265/266/267 Series, PICO® Very Fast-Acting Fuse (High-Reliability) QPL RoHS Description The 265/266/267 Series are high–reliability PICO® Fuses, that are very fast-acting, with an insulating sleeve. These fuses provide supplemental protection in end-use equipment to provide protection for components or internal circuits. They are not suitable for branch or feeder circuit use.
PAGE 212
Axial Lead & Cartridge Fuses PICO® > Very Fast Acting Fuse > 265/266/267 Series 1/4A 3/8A 1/2A 3/4A 1A 1 1/2A 2A 2 1/2A 3A 4A 5A 7A 10A 15A 100 1/8A Average Time Current Curves 1/16A Temperature Re-rating Curve TIME IN SECONDS 10 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1 0.1 0.01 0.001 0.1 1 10 CURRENT IN AMPERES 100 1000 Soldering Parameters\ Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Reco
PAGE 213
Axial Lead & Cartridge Fuses PICO® > Very Fast Acting Fuse > 265/266/267 Series Product Characteristics Materials Body: White Thermoplastic Gold-Plated Copper Leads, Type II Operating Temperature –55ºC to +125ºC Weight .32 Grams Shock Solderability MIL-STD-202, Method 208 MIL-STD-202, Method 213, Test Condition I (100 G’s peak for 6 milliseconds). Lead Pull Force MIL-STD-202, Method 211, Test Condition A (will withstand a 5 lbs.
PAGE 214
Axial Lead & Cartridge Fuses 3.6 X 10 mm > Fast-Acting Fuse > 874 Series 874 Series Fuse, Lead-free 3.6×10 mm, Fast–Acting Fuse RoHS Pb Description Single Pigtail Axial Lead 3.6 ×10mm Fast-Acting Fuse Features Agency File Number Ampere Range • Fast-Acting, Ceramic body fuse in a compact package • Pb-free, RoHS Compliant • Available in ratings of 0.10 to 10 Amperes E10480 0.100A - 10 A This space saving fuse is ideally suited for lighting, power supply, and adapter applications.
PAGE 215
Axial Lead & Cartridge Fuses 3.6 X 10 mm > Fast-Acting Fuse > 874 Series 8A 10A 1A 1.5A 1.6A 2A 2.5A 3.15A 4A 4.5A 5A 6A 6.3A 6.5A 7A .750A .800A .200A .250A .300A .400A .500A .600A .100A Average Time Current Curves .125A Temperature Re-rating Curve 1000 100 TIME IN SECONDS 10 Notes: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1 0.1 0.01 0.001 0.
PAGE 216
Axial Lead & Cartridge Fuses 3.
PAGE 217
Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo® Fuse > 875 Series 875 Series Fuse, Lead-free 3.6×10 mm, Slo-Blo® Fuse RoHS Pb Description Single Pigtail Axial Lead 3.6×10mm, Slo-Blo® Fuse Features Agency Approvals Agency • Designed to UL/CSA 248 Standard • Single Pigtail Axial Lead format • Slo-Blo® Fuse, ceramic body fuse in a compact package • Pb-free and RoHS Compliant • Available in ratings of 0.10 to 10 Amperes Applications Agency File Number Ampere Range E10480 0.
PAGE 218
Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo® Fuse > 875 Series 6A 7A 8A 10A .800A 1A 1.5A 1.6A 2A 2.5A 3A 4A 5A .500A .600A .200A .250A .300A .400A .125A Average Time Current Curves .100A Temperature Re-rating Curve 1000 100 TIME IN SECONDS 10 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1 0.1 0.01 0.001 0 .
PAGE 219
Axial Lead & Cartridge Fuses 3.
PAGE 220
Axial Lead & Cartridge Fuses 3.6 X 10 mm > Fast-Acting Fuse > 876 Series 876 Series Fuse, Lead-free 3.6×10 mm, Fast–Acting Fuse RoHS Pb PS E Description Single Pigtail Axial Lead 3.6 ×10mm Fast-Acting Fuse Features PS E • Single Pigtail Axial Lead format • Fast-Acting, ceramic body fuse in a compact package • Available in ratings of .
PAGE 221
Axial Lead & Cartridge Fuses 3.6 X 10 mm > Fast-Acting Fuse > 876 Series 5A 4A 1.6A 2A .630A 1000 .250A Average Time Current Curves .125A .160A Temperature Re-rating Curve 100 TIME IN SECONDS 10 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for ontinuous operation. 1 0.1 0.01 0.001 0.
PAGE 222
Axial Lead & Cartridge Fuses 3.
PAGE 223
Axial Lead & Cartridge Fuses 3.6 X 10 mm > Time-Lag Fuse > 877 Series 877 Series Fuse, Lead-free 3.6 × 10 mm, Time-Lag Fuse RoHS Pb PS E Description Single Pigtail Axial Lead 3.6×10mm, Time-Lag Fuse Features Agency PS E Agency File Number Ampere Range 40023242 2A – 6.3A E10480 2A – 6.3A CQC09012029601 2A – 6.3A SU05024-10002 2A SU05024-10001 3.15A - 6.
PAGE 224
Axial Lead & Cartridge Fuses 3.6 X 10 mm > Time-Lag Fuse > 877 Series Average Time Current Curves 2A 3.15A 4A 6.3A Temperature Re-rating Curve 1000 100 TIME IN SECONDS 10 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1 0.1 0.01 0.001 0.
PAGE 225
Axial Lead & Cartridge Fuses 3.
PAGE 226
Axial Lead & Cartridge Fuses 2AG > Fast-Acting > 208 Series 208 Series Lead-Free 2AG, Fast-Acting Fuse RoHS PS E Pb Description Littelfuse 208 Series (2AG) 350V Fast-Acting Fuses are available in cartridge form or with axial leads. This series provides the same performance characteristics as its 3AG counterpart, while occupying one-third the space. Sleeved fuses are available.
PAGE 227
Axial Lead & Cartridge Fuses 2AG > Fast-Acting > 208 Series Average Time Current Curves 100 3/8A 1/2A 3/4A 1A 1 1/2A 2A 2 1/2A 3A 4A 5A 6A 7A 8A 10A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.
PAGE 228
Axial Lead & Cartridge Fuses 2AG > Fast-Acting > 208 Series Product Characteristics Body : Glass Cap : Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Operating Temperature: –55ºC to 125ºC. Thermal Shock: MIL-STD-202, Method 107, Test Condition B (5 Cycles -65ºC to +125ºC).
PAGE 229
Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 209 Series 209 Series Lead-Free 2AG, Slo-Blo® Fuse RoHS Pb PS E Description Littelfuse 209 Series (2AG) 350V, Slo-Blo® Fuses are available in cartridge form or with axial leads. This series provides the same performance characteristics as its 3AG counterpart, while occupying one-third the space. Sleeved fuses are available.
PAGE 230
Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 209 Series Temperature Re-rating Curve Average Time Current Curves Note Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.
PAGE 231
Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 209 Series Product Characteristics Body : Glass Cap : Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Operating Temperature: –55ºC to 125ºC. Thermal Shock: MIL-STD-202, Method 107, Test Condition B (5 Cycles -65ºC to +125ºC).
PAGE 232
Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series 220 Series, Lead-Free 2AG Special Fuse RoHS Pb PS E ® Description The 2AG Special Fuses with various voltage ratings, provide special electric performance as required.
PAGE 233
Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Electrical Characteristics 0.35 0.35 3 0003 0004 0007 0.55 0010 250 0.35 2 5 3 0011 0012 0013 0019 250 350 300 350 1.25 0025 250 0.35 0.375 0.3 0.5 0.75 5 0029 0030 0031 0036 0037 0038 250 250 250 300 300 250 0.5 0040 250 1 0044 350 2 0045 350 7 0.5 0.
PAGE 234
Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Max.
PAGE 235
Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Recommended Accessories Accessory Type Series Description Max Application Voltage Max Application Amperage 245 Panel Mount Shock-Safe Fuseholder 300 10 150 In-Line Fuseholder 350 10 286 Panel Mount Flip-Top Shock-Safe Fuseholder 250 10 Block 254 OMNI-BLOK Fuse Block 400 10 Clip 111 PC Board Mount Fuse Clip 250 10 Holder ® Notes: 1. Do not use in applications above rating. 2.
PAGE 236
Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 2205 Series 2205 Series, Lead-Free 2AG, Slo-Blo® Fuse RoHS Pb Description The 2AG Slo-Blo® Axial Leaded Fuses provide the same performance characteristics as their 3AG counterpart while occupying one-third the space.
PAGE 237
Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 2205 Series 1000 .250A .375A .500A .750A 1.00A 1.50A 2.0A 2 .5A Average Time Current Curves Temperature Re-rating Curve TIME IN SECONDS 100 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 10 1 0.1 0.01 0.
PAGE 238
Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 2205 Series Product Characteristics Body: Glass Cap : Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 Cycles -65ºC to +125ºC).
PAGE 239
Axial Lead & Cartridge Fuses 2AG > Fast Acting > 224/225 Series 224/225 Series Lead-Free 2AG, Fast-Acting RoHS PS E Pb Description The 2AG Fast-Acting Fuses are available in cartridge form or with axial leads. 2AG Fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. Sleeved fuses are available.
PAGE 240
Axial Lead & Cartridge Fuses 2AG > Fast Acting > 224/225 Series Temperature Re-rating Curve .375A .500A .750A 1.00A 1.50A 2.00A 2.50A 3A 4A 5A 6A 7A 8A 10A Average Time Current Curves 100 TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.
PAGE 241
Axial Lead & Cartridge Fuses 2AG > Fast Acting > 224/225 Series Product Characteristics Body : Glass Cap : Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Operating Temperature: –55ºC to 125ºC. Thermal Shock: MIL-STD-202, Method 107, Test Condition B (5 Cycles -65ºC to +125ºC).
PAGE 242
Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series 229/230 Series 2AG, Slo-Blo® Fuse with Indicating Option RoHS Pb PS E Description Littelfuse 229/230 series Slo-Blo® Fuses are available in 2AG size cartridge or axial lead form, offer tripped fuse indicating option, and offer features designed to meet rigorous Telecom industry requirements. 229/230 series product ordered with the tripped fuse indicating option show discoloration of the glass body immediately after trip.
PAGE 243
Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series Electrical Characteristic Specification by Item Amp Code Ampere Voltage Rating Rating (A) (V) Interrupting Rating Nominal Melting I2t (A2 sec) 2.4300 1.3100 1.1685 0.6935 0.4805 0.3430 0.3060 0.2120 0.1460 0.1077 0.0698 0.0567 0.0502 0.0383 0.339 0.640 0.820 1.64 1.75 2.95 3.45 5.64 16.8 20.0 30.0 39.0 50.0 77.0 x x x x x x x x x x x x x x x .250 .350 .375 .500 .600 .750 .800 001. 1.25 01.5 002. 2.25 02.5 003. 0.25 0.35 0.375 0.5 0.6 0.
PAGE 244
Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series Average Time Current Curves 1000 .250A .375A .500A .750A 1.00A 1.50A 2.0A 2 .5A 3.0A 3.5A 4A 5A 7A Temperature Re-rating Curve TIME IN SECONDS 100 Note: Rerating depicted in this curve is in addition to the industry practice derating of 25% for continuous operation. 10 1 0.1 0.01 0.
PAGE 245
Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series Product Characteristics Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Materials Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 method 208 Cap1: Product Marking Brand logo, current and voltage ratings Series and agency approval marks Cap2: Dimensions Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles - -65ºC to 125ºC) Vibration
PAGE 246
Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series Packaging Packaging Specification Quantity Quantity & Packaging Code Taping Width Bulk N/A 100 HXS N/A Bulk N/A 1000 MX N/A Bulk N/A 1000 MXS N/A Bulk N/A 5 VX N/A Bulk N/A 5 VXS N/A Bulk N/A 100 HX N/A Bulk N/A 100 HXS N/A Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Bulk N/A 1000 MXF1 N/A Bulk N/A 1000 MXF16 N/A Bulk N/A 1000 MXF16O N/A Bulk N/A 1000 MXF17 N/A Bulk N/A 1000 M
PAGE 247
Cartridge and Axial Lead Fuses 5×20mm > Medium Acting > 201P Series 201P Series, 5×20mm, Medium–Acting Fuse RoHS Pb Description 5×20mm Medium–Acting, Time-lag, Glass Body Cartridge Fuse. Features • Visual fault indication • Worldwide availability • Direct solderable or plug-in versions • RoHS compliant and Lead-free Applications Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits.
PAGE 248
Cartridge and Axial Lead Fuses 5×20mm > Medium Acting > 201P Series Temperature Re-rating Curve Average Time Current Curves 00 0,0 10 I-t Characteristics ,00 10 (Min-Max Limit) DIN 41571, T.2 (50mA ... 1.25A) 0 0 1,0 0 10 10 Time (sec.) 0 1 0.1 1 0.0 01 0.0 1 1.
PAGE 249
Cartridge and Axial Lead Fuses 5×20mm > Medium Acting > 201P Series Product Characteristics Operating Temperature -25ºC to +70ºC Materials Body: Glass End Caps: Nickel–plated brass Optional Holders: Nickel-plated caps Tin-plated wires Climatic Category -25ºC/+70ºC/21 days (IEC 60068-1-3) Product Marking Cap1: Brand mark, current and voltage ratings Cap2: Series and agency approval marks Stock Conditions -10ºC to +60ºC RH, ≤ 75% yearly average, without dew, maximum value for 30 days-95% Solderabil
PAGE 250
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series 217 Series, 5 × 20 mm, Fast-acting Fuse RoHS Pb PS E Description 5×20mm fast-acting glass body cartridge fuse designed to IEC specification.
PAGE 251
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Electrical Characteristic Specifications by Item Nominal Cold Resistance (Ohms) Agency Approvals Amp Rating (A) Voltage Rating (V) .032 0.032 250 262.2000 0.00015 10000 1.6 x x x x x x x .040 0.04 250 183.1500 0.00008 8000 1.6 x x x x x x x .050 0.05 250 15.2000 0.00049 7000 1.6 x x x x x x x .063 0.063 250 10.4500 0.00056 5000 1.6 x x x x x x x .080 0.08 250 7.8900 0.
PAGE 252
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 40 Recommended Hand-Solder Parameter
PAGE 253
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Dimensions Part Numbering System 20+0.5 0217 000P 0217 xxxx M X E P 5.2+0.1 -0.2 5.1+0.6 Series 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 21.5±1.0 40±1.0 0217.032 XEP to 0217.315 XEP Quantity Code M = 1000 Packaging Code 0.65±0.05 X = Filler Option Codes 40±1.0 0217.400 XEP to 0217015 XEP Blank = Cartridge Type Fuse E = Axial Leaded Fuse 5.5±0.3 21.5±1.0 Lead-free 0.65±0.
PAGE 254
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series 218 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description 5×20mm Time-Lag glass body cartridge fuse designed to IEC specification.
PAGE 255
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Electrical Characteristics Nominal Cold Resistance (Ohms) Agency Approvals Maximum Maximum Power Nominal Voltage Drop at Rated Dissipation Melting Current At I2t (A2 sec) (mV) 1.5ln(W) Amp Code Amp Rating (A) Voltage Rating (V) .032 0.032 250 48.2580 0.01100 5000 1.6 x x x x x x .040 0.04 250 31.8620 0.01100 4000 1.6 x x x x x x x .050 0.05 250 21.2920 0.02700 3500 1.6 x x x x x x x .063 0.
PAGE 256
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 40 Time (Seconds) Cooling Time Preheat
PAGE 257
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Dimensions Part Numbering System 0218 xxxx M X E P 20+0.5 0218 000P 5.2+0.1 -0.2 5.1+0.6 Series 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 40±1.0 0218.032 XEP to 0218.100XEP 5.6±0.4 21.5±1.0 Quantity Code M = 1000 0.65±0.05 Packaging Code X = Filler 40±1.0 0218.125 XEP to 0218016. XEP Option Codes 5.5±0.3 21.5±1.0 Blank : Cartidge Type Fuse E : Axial Lead Fuse Lead-free 0.65±0.
PAGE 258
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series 213 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description 5×20mm time-Lag surge withstand glass body cartridge fuse designed to IEC specification. Features • Designed to International (IEC ) Standards for use globally • Available in cartridge and axial lead form • Meets the IEC 60127-2, Sheet 3 specification for time-Lag fuses • RoHS compliant and lead-free.
PAGE 259
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Average Time Current Curves 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.
PAGE 260
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Product Characteristics Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles –65°C to +125°C) Vibration MIL-STD-202, Method 201 Cap1: Brand logo, current and voltage Cap2: Agency approval marks Series Humidity MIL-STD-202, Method 103, Test Condition A. High RH (95%) and elevated temperature (40°C) for 240 hours.
PAGE 261
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series 219XA Series, 5×20mm, Time-Lag Fuse RoHS PS E Pb Description 5×20mm time-Lag glass body cartridge fuse designed to IEC specification.
PAGE 262
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series Electrical Characteristic Specifications by Item Nominal Amp Voltage Amp Interrupting Cold Rating Rating Code Rating Resistance (A) (V) (Ohms) Nominal Melting I 2t (A2 sec) .040 0.01640 0.040 250 31.8620 Maximum Maximum Voltage Drop Power at Rated Dissipation Current at 1.5ln (mV) (W) 4000 Agency Approvals PS E 1.6 x x x .050 0.050 250 21.2920 0.01700 3500 1.6 x x x .063 0.063 250 14.2685 0.03800 3000 1.
PAGE 263
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series 2.5A 3.15A 4A 5A 6.3A Average Time Current Curves 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.
PAGE 264
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series Product Characteristics Materials Body: Glass Cap: Nickel Plated Brass Leads: Tin Plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202, Method 211.
PAGE 265
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series 216 Series, 5×20 mm, Fast-Acting Fuse RoHS PS E Pb Description 5×20mm fast-acting ceramic body cartridge fuse designed to IEC specification. Features • Designed to International (IEC ) Standards for use globally • Meets the IEC 60127-2, sheet 1 specification for fast-acting fuses • Available in cartridge and axial lead form • RoHS compliant and lead-free Agency Approvals Agency PS E Agency File Number Cartridge: 1-5A 6.3A-10A 12.
PAGE 266
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Electrical Characteristics Specifications by Item Nominal Amp Voltage Nominal Amp Interrupting Cold Rating Rating Melting Code Rating Resistance 2 (A) (V) I t (A2 sec) (Ohms) Agency Approvals Maximum Maximum Voltage Power Drop at Dissapation Rated at 1.5ln Current (W) (mV) PS E .050 0.05 250 15.9000 0.00019 10000 1.6 x x x x x x .063 0.063 250 10.4500 0.00079 8800 1.6 x x x x x x .080 0.08 250 7.8850 0.
PAGE 267
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 Lead-Free Recommendation 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameter
PAGE 268
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Dimensions Part Numbering System 0216 xxxx M X E P 20±0.5 0216 000XP +0.1 5.2 −0.2 5.1±0.6 Series 5.1±0.6 Amp Code 40±1.0 0216.050XEP to 0216.800XEP Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 21.5±1.0 Quantity Code 0.65±0.05 40±1.0 0216001.XEP to 0216016.XEP M = 1000 Packaging Code 5.5±0.3 21.5±1.0 X = Filler Option Codes 0.65±0.
PAGE 269
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting Fuse > 216SP Series 216SP Series, 5×20 mm, Fast-Acting Fuse RoHS Pb PS E Description 5×20mm fast-acting ceramic body cartridge fuse Designed to IEC specification Features • Designed to International (IEC ) Standards for use globally • Meets the IEC 60127-2, Sheet 1 specification for Fast-Acting fuses • High breaking capacity • RoHS compliant and lead-free Applications Used as supplementary protection in appliance or utilization equipment to provide
PAGE 270
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting Fuse > 216SP Series Average Time Current Curves 1A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A Temperature Re-rating Curve 10000 1000 Time (seconds) 100 10 1 0.1 0.01 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.01 0.
PAGE 271
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting Fuse > 216SP Series Product Characteristics Materials Body: Ceramic Cap: Nickel–plated Brass Leads: Tin–plated Copper Terminal Strength Operating Temperature –55ºC to +125ºC MIL-STD-202, Method 211, Test Condition A Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 cycles, –65ºC to +125ºC) Solderability MIL-STD-202 Method 208 Vibration MIL-STD-202, Method 201 Product Marking Cap 1: Brand logo, current and voltage ratings Cap 2: Agency
PAGE 272
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series 215 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description 5×20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification Features Agency File Number PS E Cartridge: NBK080205-E10480A NBK250702-E10480E NBK100408-JP1021A Leaded: NBK080205-E10480B NBK250702-E10480F NBK100408-JP1021B . Ampere Range 1A – 5A 6.3A – 15A 16A – 20A 1A – 6.
PAGE 273
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Electrical Characteristic Specifications by Item Nominal Nominal Voltage Interrupting Amp Amp Cold Melting Rating Rating Code Rating Resistance I2t (V) (A2 sec) (Ohms) .125 0.125 250 Maximum Maximum Voltage Power Drop at Dissipation Rated at 1.5ln Current (W) (mV) 11.4455 0.0330 2600 Agency Approvals PS E 1.6 x x x .160 0.16 250 7.1000 0.0465 2400 1.6 x x .200 0.2 250 1.8400 0.340 2100 1.6 x x x x x .250 0.
PAGE 274
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Average Time Current Curves T-C Curves for 1A to 20A only .125 A .160 A .200 A .250 A A .125 .315 A A .160 .400 A A .200 .500 A .250 .630 A .315 .800 A .400 .500 A .630 A .800 A 1.00 A 1.25 A 1.60 A 2.00 A A 1.00 2.50 A A 1.25 3.15 A A 1.60 4.00 A A 2.00 5.00 A A 2.50 6.30 A A 3.15 8.00 A A 4.00 10.0 A 5.00 A 12.0 A A 6.30 15.0 A 8.00 A 16.0 A A 10.0 20.0 A 12.0 A 15.0 A 16.0 A 20.
PAGE 275
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Dimensions Part Numbering System 0215 xxxx M X E/G P All dimensions in mm 20±0.5 0215.125P to 0215020P +0.1 5.2 −0.2 5.1±0.6 0215.125XEP to 0215.800XEP 40±1.0 0215001.XEP to 0215020.XEP 40±1.0 Series Amp Code 5.1±0.6 21.5±1.0 Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 Quantity Code M = 1000 H = 100 0.65±0.05 Packaging Code 21.5±1.0 5.5±0.
PAGE 276
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag Fuse > 215SP Series 215SP Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description 5×20mm Time-Lag surge withstanding ceramic body cartridge fuse designed to IEC specification Features • Designed to International (IEC) Standards for use globally • High breaking capacity • RoHS compliant and lead-free • Meets the IEC 60127-2, Sheet 5 specification for Time-Lag Fuses Applications Agency Approvals AGENCY AGENCY FILE NUMBER AMPERE RANGE PS E NBK080205-E1
PAGE 277
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag Fuse > 215SP Series Average Time Current Curves 215001. 2151.25 21501.6 215002. 21502.5 2153.15 215004. 215005. 21506.3. 215008. 215010. Temperature Re-rating Curve 10000 1000 100 Time (seconds) 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.01 0.
PAGE 278
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag Fuse > 215SP Series Product Characteristics Part Numbering System Materials Body: Ceramic Cap: Nickel–plated Brass Leads: Tin–plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 Method 208 Product Marking Cap 1: Brand logo, current and voltage ratings Cap 2: Agency approval marks 0215 xxxx M X E SP P Series Lead-Free Current Rating Code Single-Cap Pigtail Refer to Amp Code column of Electrical Char
PAGE 279
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 232 Series 232 Series, 5×20 mm, Medium-Acting Fuse RoHS Pb PS E Description The 232 Series Fuse is a 5x20mm, medium-acting, glass body cartridge fuse. It is specifically designed to meet the requirements of Appendix 3 of METI/PSE.
PAGE 280
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 232 Series Average Time Current Curves 1A 1.25A 1.6A 2A 2.5A 3A 3.15A 4A 5A 6.3A 8A 10A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.
PAGE 281
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 232 Series Product Characteristics Materials Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202, Method 211.
PAGE 282
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 235 Series 235 Series, 5×20 mm, Fast-Acting Fuse RoHS Pb PS E Description 5×20mm fast-acting glass body cartridge fuse designed to UL specification.
PAGE 283
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 235 Series Electrical Characteristic Specifications by Item Agency Approvals .100 0.1 250 8.4000 Nominal Melting I2t (A2 sec) 0.00127 x x x x .125 0.125 250 5.7500 0.00273 x x x x .200 0.2 250 3.1500 0.00867 x x x x .250 0.25 250 2.2500 0.01660 x x x x .300 0.3 250 1.6000 0.03215 x x x x .400 0.4 250 1.075 0.05845 x x x x .500 0.5 250 0.4265 0.06915 x x x x .600 0.6 250 0.3195 0.
PAGE 284
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 235 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 Lead-Free Recommendation 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameter
PAGE 285
Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 235 Series Dimensions Part Numbering System 0235 xxxx M X E P 20+0.5 5.2+0.1 -0.2 0235000P 5.1+0.6 Series Amp Code 5.1+0.6 Refer to Amp Code column of Electrical Characteristics Table Quantity Code 5.6±0.4 21.5±1.0 40±1.0 0235.100 XEP to 0235.400 XEP M = 1000 Packaging Code X = Filler 0.65±0.05 Option Code E = Axial Leaded Lead-free 5.5±0.3 21.5±1.0 40±1.0 0235.500 XEP to 0235006.XEP 0.65±0.
PAGE 286
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 233 Series 233 Series, 5×20 mm, Medium-Acting Fuse RoHS PS E Pb Description 5×20mm medium–acting glass body fuse designed to UL specification.
PAGE 287
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 233 Series Average Time Current Curves 1A 1.25A 1.6A 2A 2.5A 3A 3.15A 3.5A 4A 5A 6A 6.3A 7A 8A 10A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.
PAGE 288
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 233 Series Product Characteristics Materials Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 Method 208 Product Marking Cap 1: Brand logo, current and voltage rating Cap 2: Series and agency approval markings Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) Dimensions Operating Temperature –55ºC to +125ºC Th
PAGE 289
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 234 Series 234 Series, 5×20 mm, Medium-Acting Fuse RoHS PS E Pb Description 5×20mm medium-acting glass/ceramic body cartridge fuse designed to UL specification. Features • Designed to UL/CSA/ ANCE 248-1 and 248-14 Standards • Glass body for 1-3.
PAGE 290
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 234 Series 10A 1.25A 1.6A 2A 2.5A 3A 3.15A 3.5A 4A 5A 6A 6.3A 8A Average Time Current Curves 1A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.
PAGE 291
Axial Lead & Cartridge Fuses 5×20 mm > Medium-Acting > 234 Series Product Characteristics Body: Glass(1A-3.
PAGE 292
Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series 239 Series, 5×20 mm, Slo-Blo® Fuse RoHS PS E Pb Description 5×20mm Slo-Blo® glass body cartridge fuse designed to UL specification.
PAGE 293
Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Electrical Characteristic Specification by Item Amp Rating Amp Code (A) .080 .100 .125 .150 .200 .250 .300 .400 .500 .600 .700 .750 .800 001. 1.25 01.6 002. 02.5 003. 3.15 03.2 03.5 004. 005. 007. 0.08 0.1 0.125 0.15 0.2 0.25 0.3 0.4 0.5 0.6 0.7 0.75 0.8 1 1.25 1.6 2 2.5 3 3.15 3.2 3.
PAGE 294
Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 80 40 Recommended Hand-Solder Param
PAGE 295
Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Dimensions Part Numbering System 0239 xxxx M X P 20+0.5 5.2+0.1 -0.2 0239 000P 5.1+0.6 40±1.0 0239 000XEP Series 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.5±0.3 21.5±1.0 Quantity Code M = 1000 0.65±0.05* Packaging Code All dimensions in mm X = Filler Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead.
PAGE 296
Axial Lead & Cartridge Fuses 5×20 mm > Audio & Medical > 285 Series 285 Series, 5×20 mm, Audio & Medical Fuse RoHS Pb PS E Description 5×20mm fuse with gold or rhodium-plated caps and colourful ceramic body. Designed to IEC Cartridge Fuse standard. Features • Desiged to International (IEC) Standard for use globally.
PAGE 297
Axial Lead & Cartridge Fuses 5×20 mm > Audio & Medical > 285 Series Electrical Characteristics Specification by Item Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 Sec.) Nominal Voltage Drop at Rated Current (mV) Nominal Power Dissipation at Rated Current (W) 250 13.1240 0.028 2600 1.6 250 0.9275 0.625 1100 1.6 250 1.1215 0.3 850 1.6 250 0.1455 1.6 350 2.5 x 0.0706 7.168 200 2.5 x 0.0546 10.8 190 2.5 x 0.0384 25.625 180 2.5 x 250 0.0269 51.
PAGE 298
Axial Lead & Cartridge Fuses 5×20 mm > Audio & Medical > 285 Series Product Characteristics Materials Body : Ceramic Cap : Gold / Rhodium-plated brass Operating Temperature –55ºC to +125ºC Terminal Strength MIL- STD-202, Method 211, Test condition A Thermal Shock MIL- STD-202, Method 107, Test Condition B: (5 cycles –65ºC to +125ºC) Product Marking Cap 1: Brand logo, current and voltage rating Cap 2: Agency approval markings Vibration MIL- STD-202, Method 201 Humidity MIL- STD-202, Method 103,
PAGE 299
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 477 Series 477 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description 400Vdc/500Vac rated, 5x20mm, time-lag, surge withstand ceramic body cartridge fuse. Features • Designed to International (IEC) Standard for use globally.
PAGE 300
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 477 Series Electrical Characteristic Amp Code Amp Rating Max Voltage Rating (V) Interrupting Rating Nominal Nominal Cold Melting Resistance 2 I t (A2 sec.) (Milli-ohms) Agency Approvals PS E .500 0.5 AC 500 DC 400 .800 0.8 500 400 1055.900 0.300 x* x** 430.000 0.909 x* 001. 1 500 400 x** 139.400 1.800 x x* 002. 2 500 400 x** 55.200 9.120 x x* x** 3.15 3.15 500 400 27.700 50.109 x x* x** 004.
PAGE 301
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 477 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters:
PAGE 302
Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 477 Series Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Reel Size N/A N/A N/A 1000 1000 1000 MX MXE MRET1 N/A N/A T1=53mm (2.087”) 477 Series Bulk Bulk Reel and Tape Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications.
PAGE 303
Axial Lead & Cartridge Fuses 5×20mm > Time-Lag > 977 Series 977 Series, 5×20mm, Time-Lag Fuse RoHS Pb PS E Description 450Vdc/500Vac rated, 5×20mm, Time-Lag, surge withstand, ceramic body, cartridge fuse.
PAGE 304
Axial Lead & Cartridge Fuses 5×20mm > Time-Lag > 977 Series Electrical Characteristic Voltage Rating Amp Code Amp Rating AC DC Interrupting Rating Nominal Cold Resistance (milli-ohms) Nominal Melting I2t (A2 sec.) Agency Approvals PS E .500 0.5 500 450 945.0 0.3 x .800 0.8 500 450 417.0 0.8 x 002. 2 500 450 44.5 17 x 3.15 3.15 500 450 27.5 58 x x 004. 4 500 450 18.4 124 x x 005. 5 500 450 06.3 6.3 500 450 100A @ 500Vac 200A @ 450Vdc x 11.9 91 x x 9.
PAGE 305
Axial Lead & Cartridge Fuses 5×20mm > Time-Lag > 977 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Lead-Free Recommendation Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Cooling Time Preheat T
PAGE 306
Axial Lead & Cartridge Fuses 5×20mm > Time-Lag > 977 Series Dimensions Part Numbering System 0977 xxxx M X E P 0977000.XP Series Amp Code 0977.500XEP to 0977.800XEP 40±1.0 Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 21.5±1.0 Quantity Code 0.65±0.05* M = 1000 Packaging Code 0977002.XEP to 0977016.XEP 40±1.0 5.5±0.3 21.5±1.0 X = Filler Option Codes E 0.65±0.05* : Axial Leaded Fuse P: Lead-free All dimensions in mm Notes: * Ratings above 5A 1.0±0.05 diameter lead.
PAGE 307
Axial Lead & Cartridge Fuses 3AG > Fast Acting > 312/318 Series 312/318 Series Lead-Free 3AG, Fast-Acting Fuse RoHS Pb PS E Description The 3AG Fast-Acting Fuse solves a broad range of application requirements while offering reliable performance and cost-effective circuit protection.
PAGE 308
Axial Lead & Cartridge Fuses 3AG > Fast Acting > 312/318 Series Electrical Characteristic Specifications by Item Amp Code Ampere Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Agency Approvals PS E .062 0.062 250 24.7000 0.000249 x x x .100 0.1 250 11.2800 0.00171 x x x .125 0.125 250 7.1450 0.00289 x x x .150 0.15 250 5.1300 0.00550 x x x .175 0.175 250 3.8750 0.00960 x x x .187 0.187 250 3.
PAGE 309
Axial Lead & Cartridge Fuses 3AG > Fast Acting > 312/318 Series .250 A .375 A .500 A .750 A 1A 1.5 A 2A 2.5 A 3A 4A 5A 6A 7A 8A 10 A 1000 .125 A Average Time Current Curves .062 A Temperature Re-rating Curve TIME IN SECONDS 100 10 1 0.1 Note: Rerating depicted in this curve is in addition to the industry practice derating of 25% for continuous operation. 0.01 0.005 0.01 1 0.
PAGE 310
Axial Lead & Cartridge Fuses 3AG > Fast Acting > 312/318 Series Product Characteristics Materials Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 method 208 Cap1: Product Marking Cap2: Brand logo, current and voltage ratings Series and agency approval marks Dimensions Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles -65°C to +125°C) Vibrat
PAGE 311
Axial Lead & Cartridge Fuses 3AG > Fast Acting > 312/318 Series Recommended Accessories Accessory Type Holder Block Clip Series Max Application Voltage Description Max Application Amperage 155100 Twist-Lock In-Line Fuseholder 32 20 342 Traditional Panel Mount Fuseholder 250 20 346 Panel Mount Flip-Top Shock-Safe Fuseholder 250 15 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 250 354 Low Profile OMNI-BLOK® Fuse Block 359 High Current Screw Terminal Fu
PAGE 312
Axial Lead & Cartridge Fuses 3AG > Slo-Blo® Fuse > 313/315 Series 313/315 Series Lead-Free 3AG, Slo-Blo® Fuse RoHS PS E Pb Description The 3AG Slo-Blo® fuse solves a broad range of application requirements while offering reliable performance and costeffective circuit protection. The fuse catalog number with the suffix “ID” instantly identifies itself upon opening by showing a discoloration of its glass body. Guesswork and time consuming circuit testing are eliminated.
PAGE 313
Axial Lead & Cartridge Fuses 3AG > Slo-Blo® Fuse > 313/315 Series Electrical Characteristic Specifications by Item Agency Approvals Nominal Nominal Cold Melting Resistance 2 I t (A2 sec) (Ohms) Ampere Rating (A) Voltage Rating (V) .010 0.01 250 4300.0000 0.000121 x x x .031 0.031 250 430.0000 0.00303 x x x x Amp Code Interrupting Rating PS E .040 0.04 250 300.0000 0.00630 x x .062 0.062 250 120.0000 0.0210 x x x .100 0.1 250 43.0000 0.0850 x x x .125 0.
PAGE 314
Axial Lead & Cartridge Fuses 3AG > Slo-Blo® Fuse > 313/315 Series Average Time Current Curves 1/16A 1/10A 15/100A .175A 1/4A 3/8A 1/2A 3/4A 1A 1 1/2A 2A 3A 4A 5A 7A 8A 10A 12A 15A 20A 25A 30A Temperature Re-rating Curve 1000 A B 100 TIME IN SECONDS B A 10 1 0.1 A - For 313/315 Series, from 10mA to 150mA B - For all other ampere ratings of 313/315 series Note: 0.01 0.05 0.1 Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.
PAGE 315
Axial Lead & Cartridge Fuses 3AG > Slo-Blo® Fuse > 313/315 Series Product Characteristics Materials Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202, Method 211, Test Condition A Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles -65°C to +125°C) Solderability MIL-STD-202 method 208 Vibration MIL-STD-202, Method 201 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Series and ag
PAGE 316
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 314/324 Series 314/324 Series Lead-free 3AB, Fast-Acting Fuse RoHS Pb PS E Description The 3AB Fast-Acting Fuse with ceramic body construction permits higher interrupting ratings and voltage ratings. Ideal for applications where high current loads are expected.
PAGE 317
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 314/324 Series 2A 3A 4A 5A 6A 7A 8A 10A 12A 15A 20A 25A 30A 40A Average Time Current Curves .375A .500A .750A 1A Temperature Re-rating Curve 1000 TIME IN SECONDS 100 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 10 1 0.1 0.01 0.
PAGE 318
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 314/324 Series Product Characteristics Materials Body: Ceramic Cap: Nickel–plated Brass Leads: Tin–plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202, Method 211, Test Condition A Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 cycles, -65°C to +125°C) Solderability MIL-STD-202 Method 208 Vibration MIL-STD-202, Method 201 Humidity Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Serie
PAGE 319
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 314/324 Series Recommended Accessories Accessory Type Holder Block Clip Series Max Application Voltage Description Max Application Amperage 155100 Twist-Lock In-Line Fuseholder 32 20 342 Traditional Panel Mount Fuseholder 250 20 346 Panel Mount Flip-Top Shock-Safe Fuseholder 250 15 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 250 20 354 Low Profile OMNI-BLOK® Fuse Block 600 30 359 High Current Scre
PAGE 320
Axial Lead & Cartridge Fuses 3AB > Very Fast-Acting > 322/332 Series 322/332 Series Lead-free 3AB, Very Fast-acting Fuse RoHS Pb PS E Description The 3AB Very Fast-Acting Fuse for protection of Silicon Controlled Rectifiers and similar solid-state devices.
PAGE 321
Axial Lead & Cartridge Fuses 3AB > Very Fast-Acting > 322/332 Series 2A 3A 4A 5A 6A 7A 8A 10A 12A 15A 20A 25A 30A 1/4A 3/8A 1/2A 3/4A 1A Average Time Current Curves 1/8A Temperature Re-rating Curve 1000 TIME IN SECONDS 100 10 Note: Rerating depicted in this curve is in addition to the industry practice derating of 25% for continuous operation. 1 0.1 0.01 0.
PAGE 322
Axial Lead & Cartridge Fuses 3AB > Very Fast-Acting > 322/332 Series Part Numbering System Dimensions Measurements displayed in millimeters (inches) 0322 xxxx M X P 322 000P / 332 000P Series (cartridge) Series Amp Code Refer to Amp Code column of Electrical Characteristics Table 6.35±0.3 (.25") Quantity Code 31.75±1.12 (1.
PAGE 323
Axial Lead & Cartridge Fuses 3AB > Slo-Blo® Fuse > 325/326 Series 325/326 Series Lead-Free 3AB, Slo-Blo® Fuse RoHS PS E Pb Description The 3AB Slo-Blo® Fuse with ceramic body construction permits higher interrupting ratings and voltage ratings. Ideal for applications where high current loads are expected.
PAGE 324
Axial Lead & Cartridge Fuses 3AB > Slo-Blo® Fuse > 325/326 Series Electrical Characteristic Specifications by Item Ampere Rating (A) Voltage Rating (V) .010 0.01 .031 0.031 .062 Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) 250 3324.8000 0.00013 x 250 332.5000 0.0110 x 0.062 250 91.7000 0.0276 x .100 0.1 250 33.5500 0.0870 x .125 0.125 250 22.4500 0.100 x .150 0.15 250 15.4500 0.143 x .175 0.175 250 8.9200 0.350 x .187 0.
PAGE 325
Axial Lead & Cartridge Fuses 3AB > Slo-Blo® Fuse > 325/326 Series Average Time Current Curves .375A .500A .750A 1.0A 1.5A 2.0A 2.5A 3.0A 3.5A 4.0A 5.0A 6.25A 7.0A 8.0A 10.0A 12.0A 15.0A 20.0A 25.0A 30.0A Temperature Re-rating Curve 1000 100 TIME IN SECONDS 10 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1 0.1 0.01 0.05 0.
PAGE 326
Axial Lead & Cartridge Fuses 3AB > Slo-Blo® Fuse > 325/326 Series Product Characteristics Materials Terminal Strength Solderability Body: Ceramic Cap: Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Thermal Shock Vibration: MIL-STD-202 Method 208 Cap1: Product Marking Cap2: –55ºC to +125ºC MIL-STD-202, Method 107, Test Condition B:(5 cycles - 65ºC to 125ºC) MIL-STD-202, Method 201 MIL-STD-202, Method 103, Test Condition A: High RH (95%) and Elevated temperature(
PAGE 327
Axial Lead & Cartridge Fuses 3AB > Slo-Blo® Fuse > 325/326 Series Recommended Accessories Accessory Type Holder Block Clip Series Max Application Voltage Description Max Application Amperage 155100 Twist-Lock In-Line Fuseholder 32 20 342 Traditional Panel Mount Fuseholder 250 20 346 Panel Mount Flip-Top Shock-Safe Fuseholder 250 15 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 250 20 354 Low Profile OMNI-BLOK® Fuse Block 600 30 359 High Current Sc
PAGE 328
Axial Lead & Cartridge Fuses 3AB > High I2t > 328 Series 328 Series, Lead-Free 3AB, High Surge Withstand Fuse RoHS Pb Description The 328 Series is a 300VAC rated, 10kA surge withstand, 6.3×32mm ceramic fuse, designed in accordance to UL248-14 Standard, provided in cartridge and axial-lead packages. Features – 20 hits of 10kA 8/20μs surge • Small form factor (6.3×32mm) with cartridge and axial-lead package options – Meets ANSI/IEEE C62.41.
PAGE 329
Axial Lead & Cartridge Fuses 3AB > High I2t > 328 Series Temperature Re-rating Curve 21 A Average Time Current Curves 10000 1000 Time (seconds) 100 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 10 1 0.1 0.01 0.
PAGE 330
Axial Lead & Cartridge Fuses 3AB > High I2t > 328 Series Product Characteristics Materials Body: Ceramic Cap: Nickel–plated brass Leads: Tin–plated copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 Method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Series and agency approval marks Operating Temperature –55°C to +125°C Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles –65°C to +125°C) Vibration MIL-STD-202,
PAGE 331
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 505 Series 505 Series, Lead-free 3AB, Fast-Acting Fuse RoHS Pb Description A 500VAC/VDC rated ceramic fuse with remarkable interrupting rating in a compact 6.3 x 32mm package, which is well suited for circuit protection in high energy applications.
PAGE 332
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 505 Series Average Time Current Curves 10A 12A 15A 16A 20A 25A 30A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.01 0.
PAGE 333
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 505 Series Product Characteristics Materials Body : Ceramic Cap : Nickel–plated brass Leads : Tin-plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 Method 208 Product Marking Cap1 : Brand logo, current and voltage ratings Cap2 : Series and agency approval marks Operating Temperature: –55ºC to 125ºC. Thermal Shock: MIL-STD-202, Method 107, Test Condition B (5 Cycles -65ºC to +125ºC).
PAGE 334
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 506 Series 506 Series Lead-Free 3AB, Fast-Acting Fuse RoHS Pb Description A 600Vdc rated ceramic fuse with remarkable interrupting rating in a compact 6.3×32mm package, which is well suited for circuit protection in high DC energy applications. Features • In accordance with Underwriter’s Laboratories Standard, UL 248-14. • Available in cartridge and axial lead form.
PAGE 335
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 506 Series Average Time Current Curves 506015 506016 506020 Temperature Re-rating Curve 10000 1000 Time (seconds) 100 10 1 0.1 0.01 0.001 0.01 0.1 1 Amps 10 100 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.
PAGE 336
Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 506 Series Recommended Accessories Description Max Application Voltage 150322 In-Line Fuseholder 500 354 Low Profile OMNI-BLOK® Fuse Block 359 High Current Screw Terminal Fuse Block 122 High Current Traditional PC Board Fuse Clip 1000 30 101 Rivet/Eyelet Type Fuse Clip 1000 15 Accessory Type Series Holder Block Clip 600 Max Application Amperage 15 30 30 Notes: 1. Do not use in applications above rating. 2.
PAGE 337
Axial Lead & Cartridge Fuses 3AB 1000Vac/dc High Voltage Fuse 508 Series Lead-Free 3AB Fuse RoHS Pb Description A 1000Vac/Vdc rated ceramic fuse with remarkable interrupting rating in a compact 6.3×32mm package, which is well suited for circuit protection in high energy applications. Features • In accordance with Underwriter’s Laboratories Standard UL 248-14 Agency File Number Ampere Range E10480 0.315A - 1A N/A 0.
PAGE 338
Axial Lead & Cartridge Fuses 3AB 1000VAC / DC High Voltage Fuse 508001 10000 508.500 Average Time Current Curves 508.315 Temperature Re-rating Curve Time (seconds) 1000 100 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 Amps Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.
PAGE 339
Axial Lead & Cartridge Fuses 3AB 1000Vac/dc High Voltage Fuse Part Numbering System Dimensions 0508 xxxx M X E P Measurements displayed in millimeters (inches) 508 000P Series (cartridge) 508 000EP Series (axial leaded) 6.35±0.3 (.25") Series Amp Code Refer to Amp Code column of Electrical Characteristics Table 6.985±0.3 (.275") 31.75±1.12 (1.25") Quantity Code 32.72±1.12 (1.288") Axial Lead Diameter: 0.81±0.05 (.
PAGE 340
Axial Lead & Cartridge Fuses 6x25mm > 70VDC Fuse > 688 Series 688 Series Lead-Free, 6x25mm Fuse RoHS Pb Description A 70Vdc rated ceramic fuse with remarkable interrupting rating in a compact 6x25mm package, which is well suited for circuit protection in telecom applications.
PAGE 341
Axial Lead & Cartridge Fuses 6x25mm > 70VDC Fuse > 688 Series 30A 40A 10000 15A 10A Average Time Current Curves 5A 6A Temperature Re-rating Curve 1000 TIME IN SECONDS 100 10 1 0.1 0.01 1 10 CURRENT IN AMPERES 100 1000 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.
PAGE 342
Axial Lead & Cartridge Fuses 6x25mm > 70VDC Fuse > 688 Series Product Characteristics Materials Terminal Strength Solderability Product Marking Packaging Body : Ceramic Cap : Tin–plated Copper Leads: Tin-plated Copper MIL-STD-202, Method 211, Test Condition A Operating Temperature: –55ºC to 125ºC.
PAGE 343
Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 810/811/813/814 Series Circuit Board Mount Enclosed Fuse Holders RoHS Pb Product Characteristics 810 Series Holder 815 Cap FOR 5×20MM FUSES 811 Series Holder Compatible Fuse Types 810 Series 811 Series 813 Series 814 Series 5×20mm 6.3×32mm 5×20mm 6.3×32mm 5×20mm 6.3×32mm 5×20mm 6.
PAGE 344
Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted Agency Approvals Agency Additional Information Agency File Number 810 Series 811 Series 813 Series 814 Series 118611 120642 118349 118347 E 70164 E 70164 E70164 E70164 47574 47574 47574 47574 Ordering Information Description Ordering Number Packaging Cap, 5×20 mm 815 0000 0005 Bulk 100 Cap, 6.
PAGE 345
Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 830/831/834 Series Circuit Board Mount Enclosed Fuse Holders RoHS Pb Product Characteristics 835 Cap 830 Series Holder FLUSH MOUNT TYPE 831 Series Holder Compatible Fuse Types 830 Series 831 Series 834 Series 5×20mm 5×20mm 5×20mm Holder/Cap: Black Thermoplastic, UL94 V-0 Materials Metal Parts: Copper alloy, corrosion protected Terminals: Solderable, tinned 837 Cap Rated Voltage: 250V 834 Series Holder FINGER GRIP TYPE
PAGE 346
Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted Additional Information Agency Approval Agency Agency File Number 830 Series 831 Series 834 Series 120623 123441 6913 E70164 Datasheet 830 Series Resources 830 Series Samples 830 Series Datasheet 831 Series Resources 831 Series Samples 831 Series Datasheet 834 Series Resources 834 Series Samples 834 Series 47574 Ordering Information Ordering PN Description Fuseholder 830 0000 0005 ACS 5×20mm Fuseholder 830 Series for
PAGE 347
Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 345 Series Shock Safe Circuit Board Mount Enclosed Fuse Holders RoHS Pb Product Characteristics Compatible Fuse Types 3AG 3AB 5×20mm Similar to our Shock-Safe panel mount fuseholders, this series is designed per IEC Standards 60127-6. Two different knob styles available are available for use with 3AG and 3AB (¼” × 1¼”) or 5 × 20mm fuses. Description Dimensions .49" 1.77" .44" .20" .24" .68" .598" .602" .698" .
PAGE 348
Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 596/583 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm Fuses RoHS Pb Product Characteristics Compatible Fuse Types 5×20mm Holder: Duroplastic, black Cap: Thermoplastic, UL 94 V-0, black Materials 583 Cap IP 40 (IEC 60529) Operating Temperature -25 °C to 70 °C Stock Conditions 10 °C to 60 °C Contact Resistance ≤ 5mΩ Dielectric Strength 3 kV, 50Hz, 1 min., dry Insulation Resistance > 10 MΩ (500 V DC, 1 min.
PAGE 349
Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 652 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm Fuses Not for new designs - refer to No. 852 and 853 FLUSH MOUNT TYPE Compatible Fuse Types Sealing Washer: Thermoplastic (Cap 653 04 & 655 04) Materials Metal Parts: Copper alloy, corrosion protected Terminals: Solderable tinned Rated Voltage: 250V Electrical Data (23ºC) 652 Series Holder ∅ 12,3 32,6 10 + 0,1 1,3 + 0,1 Vertical / 2-Pin 2,6 Max. Current/Power: 6.
PAGE 350
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 345 Series Shock-Safe Panel Mount Enclosed Fuse Holders RoHS Pb Product Characteristics Compatible Fuses For 3AB, 3AG, 5×20mm, or 2AG Fuses Description Designed to eliminate the possibility of electrical shock, as defined in IEC standards 60127-6. The universal fuseholder body will accept 3AB, 3AG, 5 × 20mm, and 2AG fuse sizes depending on knob selected. Permits inventory reduction of bodies and provides knob interchange versatility.
PAGE 351
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted Dimensions Low Profile Fingergrip Knob .090" x .160" HOLE .60" DIA. E E F US FUS .41" 1.59" Rear Mount Fingergrip Knob US special 1/2" thread .65" DIA. E E F Terminal Styles special 1/2" thread 1.50" MAX. FUS .50" MIN. special 1/2" thread .187" .250" 3/16" NEMA QUICK CONNECT 1/4" NEMA/DIN QUICK CONNECT .475" .480" Bottom Terminal Right Angle Straight .460" .465" C .500" .505" .60" DIA. E E F US .
PAGE 352
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 800/801/802/803 Series Panel Mount Enclosed Fuse Holders RoHS Pb Product Characteristics 800 Series Holder 815 Cap FOR 5×20MM FUSES Series: 800 Compatible Fuses 5×20mm 5×20mm 6.3×32mm 6.3×32mm 6.3×32mm Holder/Cap: Black Thermoplastic, UL94 V-0 800 01 Series Holder 800 01 801/802 816 Cap FOR 6.
PAGE 353
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted Dimensions (millimeters) 800 Series 801/802 Series 0,5 4,45 7,62 M12,7x1,5 4,45 0,5 max.0,2 7,62 +- 0,1 distance Fuse carrier inserted max. 0,2 M12,7x1,5(0,75) fuse-carrier inserted bayonet-joint 2,5 SW14 15 4,8+- 0,1 R1 4,8 SW14 ø16 ø15 3,2 2,5 front panel 3,2 16 Bayonet-joint A 1...6 5 45.7 8 5,5 1...
PAGE 354
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 820/821/823/824 Series Panel Mount Enclosed Fuse Holders RoHS Pb Dimensions 820 820 Series Holder 835 20 Cap 835 Cap Bayonet-joint 821 Series Holder 3,2 2,5 4,8 ø15 ø16 SW14 FLUSH MOUNT TYPE 7,62 M12,7x1,5 820 20 Series Holder 4,45 Fuse carrier inserted max. 0,2 FLUSH MOUNT TYPE 0,5 820 Series 5,5 1...
PAGE 355
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted Product Characteristics Compatible Fuses 820 Series 820 20 Series 821 Series 823 Series 824 Series 824 20 Series 5×20mm 5×20mm 5×20mm 5×20mm 5×20mm 5×20mm Holder/Cap: Black Thermoplastic UL94 V-0 Holder/Cap: Thermoplastic UL 94V-0, black Holder/Cap: Thermoplastic UL94 V-0, white Holder/Cap: Black Thermoplastic UL 94 V-0 Materials Holder/Cap: Holder/Cap: White Thermoplastic Thermoplastic PBT, UL94 V-0 black, UL94 V-0
PAGE 356
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 342 Series Panel Mount Enclosed Fuse Holders for 3AG/AB Fuses Watertight Product General Application Products Straight Terminal with Knurled Knob RoHS Product Characteristics General Application Products Right Angle Terminal with Fluted Knob 3AG/AB Rated at 20 amperes for any voltage up to 250. Electrical Ambient Temperature .090" X .12" HOLE .78" 2400 volts minimum. 1500 volts minimum. Mounting Withstands 15 lb.in.
PAGE 357
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 340 Series RF Shielded / Watertight Panel Mount Fuse Holders for 3AB/3AG Fuses RoHS Product Characteristics Dimensions 2.19" MAX. .17" MAX. .88" DIA. 1" MAX. O-RING R.F.I. GASKET CAP KEEP CHAIN Compatible Fuses For 3AG and 3AB Fuses Description Radio frequency shielded fuseholders eliminate possible transmission or reception of RF signals through the hole in the chassis in which the fuseholder is mounted.
PAGE 358
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 344/348 Series Blown Fuse Indicating / Low Profile Holders for 3AB/3AG Fuses 344 Series (Indicating) 348 Series (Low Profile) Product Characteristics For 3AB/3AG Type Fuses Features Low profile design Blown fuse indicator Electrical 348 Series: Rated at 15 amps for any voltage up to 250 volts. 344 Series: Rated at 15 amps at lamp voltage shown below. Dielectric Strength 1500 volts minimum.
PAGE 359
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 286/346 Series Flip-Top Shock-Safe Panel Mount Fuse Holders RoHS Pb Product Characteristics Compatible Fuses For 3AG, 3AB, 5×20mm, or 2AG Fuses Features BARRIER-PROTECTED TERMINALS FUSE CARRIER HOLDS SPARE FUSE LOW PROFILE DESIGN Agency Approvals Agency Agency File Number E14721 7316 * Ensure that proper fuse re-rating is factored in fuseholder selection.
PAGE 360
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 245 Series Shock-Safe Fuse Holders for 2AG Fuses RoHS Pb Product Characteristics Compatible Fuse Size 225 Series, 229 Series, 2200029 Series Screwdriver slot knob style provides low profile Features Dimensions .38" .63" DIA. (NUT DIA) .93" REF. .77" REF. .55" DIA. Shock-safe design reduces possibility of electrical shock. Electrical Rated at 10 amperes for any voltage up to 300 volts.
PAGE 361
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 344 Series Blown Fuse Indicating Holders for 3AG and 3AB Fuses Product Characteristics 344 000 Series 3AG 3AB Electrical Rated at 20 amperes at lamp voltage shown below. Dielectric: withstanding voltage exceeds 1500 volts. All fuseholders are supplied with a resistor.
PAGE 362
Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 870 Series Medical Grade Shock-Safe Holder for 5×20mm Fuses RoHS Pb Product Characteristics 870 Compatible Fuses For Shocksafe, Medical Grade, 5×20mm fuses Holder/Cap: Black Thermoplastic, UL 94V0 Metal Parts: Copper alloy, corrosion protected Materials Terminals: Solderable, tinned Rated Voltage: 250V Electrical Data (23ºC) Rated Current: 10A Rated Power: 2.5W (VDE) Dimensions 870 16,2 35,1 + 0,2 8,9 +0,15 ∅15 SW 14 4,8 max.
PAGE 363
Cartridge Fuse Holders Enclosed Fuseholders > Panel/Circuit Board Mounted 850/851/852/853 Series Enclosed Fuse Holders for 5×20mm Fuses RoHS Pb Product Characteristics 850 Series Holder PANEL MOUNTED (IP40) 850/851 Series Compatible Fuse 855 Cap WITHOUT SILICON RING (IP 40) 851 Series Holder PANEL MOUNTED (IP54) Materials 852/853 Series 5×20mm Holder: Black Thermoplastic Cap: Black Thermoplastic Both UL94VO Holder/Cap: Black Thermoplastic, UL 94V0 Sealing Ring:Silicon (Cap 856) Metal Pa
PAGE 364
Cartridge Fuse Holders Enclosed Fuseholders > Panel/Circuit Board Mounted Dimensions Ordering Information 851 Series 850 Series Ø15 + 0,3 11,9 -0,15 SW14 9,4 Ø15 + 0,3 Packaging 855 0000 1009 Bulk 100 Cap, w/silicon ring (IP54) 856 0000 1009 Bulk 100 850 Series Holder (IP40) 850 0000 1009 Bulk 100 851 Series Holder (IP54) 851 0000 1009 Bulk 100 852 Series Holder (IP40) 852 0000 1009 Bulk 100 853 Series Holder (IP54) 853 0000 1009 Bulk 100 13 -0,3 12 -0,1 12,7 -0,1 M12,7x1,5 2,
PAGE 365
Cartridge Fuse Holders Enclosed Fuseholders > Panel/Circuit Board Mounted 860/862 Series Enclosed Fuse Holders for 5×20mm and 6.2x32mm Fuses RoHS Pb Product Characteristics 865 Cap FOR 5×20MM FUSES 860 Series Holder PANEL MOUNTED 860 Series Compatible Fuses 862 Series 5×20mm 6.3×32mm Holder/Cap: Black Thermoplastic, UL 94V0 Materials 866 Cap FOR 6.
PAGE 366
Cartridge Fuse Holders Enclosed Fuseholders > Panel/Circuit Board Mounted Dimensions Ordering Information 860 Series 53,7 + 0,5 4 + 0,2 M12,7x1,5 ø15 + 0,3 1, 8 0,5 4,8 5 6, max.
PAGE 367
Cartridge Fuse Clips 102/122 Series Circuit Board Mount Fuse Clips for 1/4” Diameter Fuses RoHS Pb Product Characteristics Compatible Fuse Size 102 Series 122 Series 1/4” Diameter Fuses 312, 313, 314, 326, 505, 506, 508 Series Current Level 15 amperes max 30 amperes max Product Dimensions Straight Leads Bowed Leads 3.18 (.13") Ø 3.35 (Ø .13") 7.87 (.31") 8.38 (.33") 7.11 (.28") 8.08 (.32") Agency Approval Agency 10.67 (.42") Agency File Number 102 Series 122 Series 7.11 (.28") 10.67 (.
PAGE 368
Cartridge Fuse Clips Ordering Information Ordering PN * Traditional Clips 0102 0071 0102 0074 0102 0076 0122 0055 0122 0083 0122 0087 0122 0088 0122 0093 Bowed Tab Clips 0102 0078 0102 0079 0122 055Z-1 0122 088Z-1 Catalog No.
PAGE 369
Cartridge Fuse Clips 100/102/122 Series Low Profile Circuit Board Mount Fuse Clips for 1/4” Diameter Fuses RoHS Pb Product Characteristics 102 080 Compatible Fuse Size 122 090 100 058 1/4” Diameter and 6.3mm Fuses Current Level 15 Amps max 30 Amps max 15 Amps max Agency Approval Agency Length Leads Agency File Number Width Leads 102 080 122 090 100 058 E14721 Product Dimensions Mounting Dimensions for 102/122 Series 102/122 Series 7.52 (.30˝) 6.35 (.25˝) 7.52 (.30˝) 4.67 (.18˝) 3.
PAGE 370
Cartridge Fuse Clips Ordering Information Ordering PN* Catalog No.
PAGE 371
Cartridge Fuse Clips 100/445/030/520 Series Circuit Board Mount Fuse Clips for 5mm Diameter Fuses RoHS Pb Product Characteristics 100 054/056 series 100 020 series 445/030/520 series 5mm Diameter Fuses 213, 215, 216, 217, 218, 219XA, 232, 233, 234, 235, 239, 477 and 977 Series Compatible Fuse Size 10 Amp max Current Level 20 Amp max 10 Amp max Agency Approval Agency Agency File Number 100 054/056 series 445/030 series 100 020 series 520 series N/A E14721 N/A N/A 5.94 (.23") 4.5 (.18") 4.
PAGE 372
Cartridge Fuse Clips Ordering Information Ordering PN Catalog No.
PAGE 373
Cartridge Fuse Clips 111 Series Thru-Hole and Surface Mount Holders for 2AG or 4.5-5mm Diameter Fuses RoHS Pb Product Characteristics 111 501 Compatible Fuse Size Current Level 111 506 111 505 4.5mm~5mm Diameter Fuses 10 Amps max 10 Amps max 10 Amps max PC PC Surface Mount Mounting Agency Approval Agency Agency File Number 111 501 111 506 111 505 E14721 N/A N/A Product Dimensions Mounting Dimensions for 111 505 Mounting Dimensions for 111 501 / 111 506 Table 1 A Dim. B Dim. C Dim.
PAGE 374
Cartridge Fuse Clips 105/106/125 Series Circuit Board Mount Clips for Midget (13/32”) Diameter Fuses Traditional Type: 105/125 Series Low Profile Type: 106 Series RoHS Pb Product Characteristics Compatible Fuse Size Current Levels 105 Series 125 Series 106 Series 13/32” Diameter Fuses (Midget Type Fuse) 15A max 30A max 15A max Agency Approval Agency 105 Series Agency File Number 125 Series 106 Series E14721 Product Dimensions Ordering Information Ordering Catalog No. No. 12.50 (.
PAGE 375
Cartridge Fuse Clips 101/102/105/107/109/121/125/127/129 Series Rivet/Eyelet Mount Fuse Clips for 1/4”- 13/16” Dia.
PAGE 376
Cartridge Fuse Clips Ordering Information Ordering PN* Catalog PN Material Plating Style Current Level Packaging 0101 0001 101 001 Spring Brass Nickel-plated Ear 15A max Z 0121 0001 121 001 Beryllium Copper Silver-plated Ear 30A max Z 0105 0001 105 001 Spring Brass Nickel-plated Ear 15A max Z 0125 0001 125 001 Beryllium Copper Silver-plated Ear 30A max Z 0127 0001 127 001 Beryllium Copper Silver-plated Ear 30A max Z 0109 0001 109 001 Phos.
PAGE 377
Cartridge Fuse Clips 520/521/102071 Series Circuit Board Mount Fuse Clips for 5mm & 6.3mm Diameter Fuses RoHS Pb Product Characteristics 520 Clip Compatible Fuse Size Electrical Data (23ºC) 520 Clip 521 Clip 102071 Clip (90° Pin Shift) 520 Clip 5.2 3.6 5.2 4 5 4.6 7.5 5 10 2 5 1.3 +0.1 1.3 +0.1 4.2 5mm Diameter Max. Current/Power: 6.3A/2.5W PC Board, 5mm pin spacing Solder pins 0.4×1.2mm Solderability 245°C maximum, 3 sec. maximum (IEC 60068-2-20) N/A 260ºC, 10 sec.
PAGE 378
Cartridge Fuse Clips 518 Series Miniature Circuit Board Mount Clip for 5mm / 6.3mm Diameter Fuses RoHS Pb Product Characteristics Compatible Fuses For 5mm/6.3mm Fuses Materials Clip: Copper alloy Solderable, tinned Rated Voltage: 250V Max. Current/Power: 10 A/2.5 W PC Board, 5mm pin spacing Kicked solder pins 0.4×1.1 mm Electrical Data (23ºC) Mounting Minimum Cross Section Conducting path - 0.2mm2 Unit Weight 0.
PAGE 379
Cartridge Fuse Clips 111/519 Series 5mm Fuse Clips Taped for Automated Insertion RoHS Pb Product Characteristics 111 Series Compatible Fuse Size Materials Mounting Current Level 519 Clip Taped 1mm (.039") Product Dimensions 1.3mm (.051") 1mm (.039") 1.05mm (.041") DIA. 4 HOLES 12.7mm (.500") 1mm (.039") 0.5mm 16mm (.020") (.630") 5.3mm (.209") 5mm (.197") 12.7mm (.50") 6.35mm (.250") 6mm (.
PAGE 380
Cartridge Fuse Clips 523 Series 5×20mm Fuse Clips for Automated Pick In Place (PIP) RoHS Pb Product Characteristics (For 523 PIP Clip) Materials Copper alloy Solderable, tinned Electrical Data (23ºC) Mounting Solderability Soldering Heat Resistance Minimum Cross Section Unit Weight Product Dimensions Rated Voltage: 250V Max. Current/Power: 6.3A/2.5W PC Board, 5,2 mm pin spacing Solder pins 0.4×1.2 mm 245°C maximum, 3 sec. maximum (IEC 600682-20) 260 ºC, 10 s (IEC 60068-2-20) Conducting path - 0.
PAGE 381
Cartridge Fuse Blocks 520 Series Metric OMNI-BLOK® Molded Base Fuse Block for 5×20mm Fuses RoHS Pb Product Characteristics Compatible Fuse Sizes 5×20mm Fuses Description The metric Omni-Blok® fuse block, for 5×20mm size fuses, is a low profile design that is available with a choice of solder type terminals, NEMA style QC terminals, or PC board mountable terminals. Each of these designs has tin plated brass terminals. A unique design feature provides self-alignment of the clips to the fuse caps.
PAGE 382
Cartridge Fuse Blocks Ordering Information Product Dimensions SolderTerminalsType: Ordering PN 10A Part Number Width (B) Clip/ Terminal Material AntiRotation Boss .40” Brass No X X .110" Solder Terminals Type 520 .090" DIA. THRU .07"x.13 HOLE 0520 0004 Z 1.44" 520 004 Q.C. Terminals (NEMA Style .110”) Type 520 004 45 .54" .016" .50" .92" 0520 0003 Z 520 003 .40” Brass No 0520 0005 ZXGY 520 005 GY .40” Brass Yes .40” Brass No P.C. Board Mount Type .
PAGE 383
35" typ. Cartridge Fuse Blocks 254 Series OMNI-BLOK® Molded Base Fuse Block for 2AG Fuses RoHS Pb Product Characteristics .190" x .187" deep C bore with .050" material remaining .50" typ. .090" REF. DIA. Thru .110" typ. Compatible Fuses Size 2AG Description This low profile Omni-Blok® Fuse Block design is available with a choice of solder type terminals, Q.C. terminals or P.C. board mountable terminals.
PAGE 384
Cartridge Fuse Blocks Ordering Information Ordering NO.* Catalog NO. No. of Poles Width (B) Clip/Terminal Material Packaging Available Solder Type Terminals 0254 0001Z 254 001 1 0.35” Brass Z 0254 0002Z 254 002 2 0.875” Brass Z 0254 0003Z 254 003 3 1.31” Brass Z 0254 0004Z 254 004 4 1.75” Brass Z 0254 0005Z 254 005 5 2.18” Brass Z 0254 0006Z 254 006 6 2.62” Brass Z 0254 0007Z 254 007 7 3.06” Brass Z 0254 0008Z 254 008 8 3.50” Brass Z NEMA Style .110” Q.
PAGE 385
Cartridge Fuse Blocks 354 Series OMNI-BLOK® Molded Base Fuse Block for 3AB/3AG Fuses RoHS Pb Product Characteristics Compatible Fuses Size 3AB/AG Description A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The unique design permits self-alignment of clips to fuse cap. This, plus a one-piece clip/terminal assures low contact resistance.
PAGE 386
Cartridge Fuse Blocks Ordering Information Solder Terminals NEMA Style 3/16” Quick Clip Terminals 1/4” Quick Clip Terminals NEMA Style 1/4” Quick Clip .032” Terminals – Ordering No. NEMA Style 1/4” Quick Clip Terminals Number of Poles Reference Dimension “A – 1 .50” .50” Ordering No. 03540101ZXGY – – 03540021ZXBL* 03540621ZXBL* 03540821ZXBL* – 03540921ZXBL* 1 03540001ZXGY 03540601ZXGY 03540801ZXGY 03540701ZXGY 03540901ZXGY 1 .
PAGE 387
Cartridge Fuse Blocks 646 Series Molded Base Fuse Block For 5×20mm Fuses RoHS Pb Product Characteristics Compatible Fuse Sizes For 5×20mm Fuses Holder: Black Thermoplastic, UL94 V-0 Polyamide PA 6.6 648 Cover (Optional Cover) 640 Adapter (Optional Adapter) Cover: Transparent Thermoplastic,UL94 V-0, Polycarbonate PC Materials Adapter: Polyester PBT, UL94 V-0 Metal Parts: Tin plated Copper alloy Rated Voltage: 250V Electrical Data (23ºC) 646 Series Holder Max. Current/Power: 6.3A/2.
PAGE 388
Cartridge Fuse Blocks 649 Series Molded Fuse Block, PC Mount for 5×20mm Fuses RoHS Pb Product Specifications Compatible Fuse Size 5 × 20 mm standard cartridge fuse Ordering Number Materials 649 0000 1039 649 0000 3039 Holder: White Thermoplastic, PBT UL94 V-0 Holder: Grey Thermoplastic, PA 66 UL94 V-0 Metal Parts: Tin Plated Copper Alloy Dimensions Dimensions in millimeter [inch] 22.6 ±.2 [.89] 12.0 +0/-.3 [.47] 9 [.354] 3 [.12] 13 [.51] 3.5 +.2/-0 [.138] .5 [.02] 15 ±.1 [.59] 1 [.
PAGE 389
Cartridge Fuse Blocks 656 Series Molded Base PC Mount Fuse Block For 5×20mm Fuses RoHS Pb V D E Product Characteristics Compatible Fuse Size Holder: Black Thermoplastic UL94 V-0 Materials 659 Cover 660 Cover (TRANSPARENT) (OPAQUE - SUITABLE FOR INFRARED REFLOW SOLDERING PROCESSES) 5×20mm Metal Parts: Tin plated copper alloy Rated Voltage: 250V Rated Current: 10A Electrical Data Rated Power: without cover: 4W (23ºC): with reflow-cover: 4W with transparent cover: 2.5W 656: Solder pins 0.4mm×1.
PAGE 390
100 20.2 Cartridge Fuse 12.8 Blocks 44.
PAGE 391
9.6 13.2 12 Cartridge Fuse Blocks 22.7 10.8 Admissible Power Acceptance in Watt 2.5 25 6 Max dimension for removal of cover 11 6(milimeter) Packaging Dimensions 2.0 I = 1.0 In 1.5 I = 0.7 In I = << In 1.0 0.5 0.0 0 Ordering Information Soldering pad layout 20 40 60 80 100 Ambient Air Temperature Ta °C Without cover or with 660 cover (opaque): Tape Dimensions 658 0000 1109 16 658 0000 3009* 658 0000 3109* 44 Fuse Holder - Thermoplastic / Tin terminals 4.0 (100 pcs 3.
PAGE 392
Cartridge Fuse Blocks 356/359 Screw Terminal Laminated Base Terminal for 3AG/AB Fuses RoHS Product Characteristics Compatible Fuse Size 3AG/AB Electical 356 Series Rated at 15 Amp. / 600 V AC/DC 359 Series rated at 30 Amp. / 600 V AC/DC Clip/Terminals 356 000 Series: Nickel-plated spring brass 359 000 Series: Silver-plated beryllium copper Terminals B-32THD screw type Base Black phenolic laminate. Mounting Hole 3AG Block: Reference Dimensions .142”/.147” diameter with .295”/.302”×82” C.S.
PAGE 393
In-Line Cartridge Fuse Holders 155 Series Twist-Lock In-Line Holders for 3AG/AB Fuses RoHS Pb Product Characteristics 155 100U 155 100A Compatible Fuses For low voltage 3AG/AB or SFE Fuse Applications Electrical Intended for use at 32 volts or less with fuses rated up to 20 amperes when the proper spring is installed for fuse size. Molded Parts Black Thermoplastic (UL94 V-2). Body halves have a .14” diameter hole for insulated wire. Ambient Temperature –40ºC to +75ºC. Contact Rivet Brass.
PAGE 394
In-Line Cartridge Fuse Holders 155 Series Heavy-Duty Bayonet Knob In-Line Holders for 3AG/AB Fuses RoHS Pb Product Characteristics 155 0xxU 155 0xxA Dimensions 52.83 (2.08") 17.53 (.69") Compatible Fuses For Low voltage 3AG/AB or SFE Fuse Applications Electrical Intended for use at 32 volts or less with fuses rated up to 20 amperes when the proper spring is installed for full size. Molded Parts Body and knob are Black Thermoset (UL94 V-0). Both body and knob have a .
PAGE 395
In-Line Cartridge Fuse Holders 150 Series In-Line Holders for 2AG or 5×20mm Fuses RoHS Pb Product Characteristics Agency Approval Agency Agency File Number Compatible Fuses 2AG or 5×20mm Electrical This fuseholder, part number 150274, is intended for use with 2AG and 5 × 20mm fuses. Maximum current ratings are 5 amperes at 350V for the 2AG size fuses and 10 amperes at 350V for the 5 × 20mm size fuses.** Body Black Nylon, UL94 V-0 Terminals Brass Wire 16 Awg size; Nominal o.d. 0.
PAGE 396
Special Application Fuses 242 Series Barrier Network Fuse 242 Series Barrier Network Fuse RoHS Description The 242 Series hazardous area barrier network fuse offers a range of fuses designed to enable greater safety operating electronic equipment within potentially explosive environments. Features • Available in both axial lead and surface mount. • High interrupting rating suitable for intrinsic safety protection of hazardous locations equipment.
PAGE 397
Special Application Fuses 242 Series Barrier Network Fuse Dimensions 4.60mm (.181") .080A .100A .125A .160A .200A .250A .050A Average Time Current Curves 100 3.02mm (.119") .635mm (.025") 8.40mm (.331") 10 TIME IN SECONDS 1.90mm (.075") 1.90mm (.075") 4.60mm (.181") 1 3.02mm (.119") 0.1 8.40mm (.331") 9.80mm 0.01 2.90mm 0.001 3.20mm 0.0001 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES 4.
PAGE 398
Special Application Fuses PICO® 259 Series Safe-T-Plus Fuse for Hazardous Locations PICO® 259 Series Safe-T-Plus Fuse RoHS Description The Safe-T-Plus 259 Series offers a range of encapsulated fuses designed to enable greater safety for operating electronic equipment within potentially explosive environments.
PAGE 399
Special Application Fuses PICO® 259 Series Safe-T-Plus Fuse for Hazardous Locations 259 Series Withstands 5 cycles of – 55°C to 125°C Vibration Per MIL-STD-202, Method 201 Insulation Resistance (After Opening) Greater than 10,000 ohms Temperature Re-rating Curve 5A Thermal Shock 100 3.15 A Operating temperature depends on fuse rating and max. allowed fuse surface temperature. (Consider re-rating) .250 A .375 A .500 A .750 A 1A Operating Temperature .
PAGE 400
Special Application Fuses PICO® 259 Series Safe-T-Plus Fuse for Hazardous Locations Dimensions Part Numbering System 0259.062M (.512") 13mm (.025") .635mm SERIES (.315") 8mm (.197") 5mm AMP Code The dot is poisitioned before the Packaging Suffix with whole ratings and within the numbering sequence for fractional ratings. Refer to Amp Code column in the Electrical Specifications table. (.394") 10mm Example: 1 amp product is 0259001.M (.062 amp product shown).
PAGE 401
Special Application Fuses PICO® 259-UL913 Series Intrinsically Safe Fuse for Hazardous Locations PICO® 259-UL913 Series Intrinsically Safe Fuse RoHS Description The 259-UL913 Series offers a range of encapsulated fuses certified under the UL 913, the standard for intrinsically safe electrical equipment, to operate in hazardous locations.
PAGE 402
Special Application Fuses PICO® 259-UL913 Series Intrinsically Safe Fuse for Hazardous Locations 259 Series 1A - 40ºC to +73ºC 3A - 40ºC to +74ºC 5A - 40ºC to +45ºC Notes: 1. Any use of the 259-UL913 Series fuse outside of the ambient temperature ranges specified in the table is subject to additional investigation. 2. Specified ambient temperature range is for intrinsic safety certification.
PAGE 403
Special Application Fuses PICO® 259 Series Safe-T-Plus Fuse for Hazardous Locations Part Numbering System Dimensions 0259.062 M X913 (.512") 13mm SERIES (.315") 8mm (.197") 5mm AMP Code The dot is poisitioned before the Packaging Suffix with whole ratings and within the numbering sequence for fractional ratings. Refer to Amp Code column in the Electrical Specifications table. Example: (.025") .635mm 1 amp product is 0259001.MX913 (.062 amp product shown). (.
PAGE 404
Special Application Fuses 481 Series Alarm Indicating Fuse 481 Series Alarm Indicating Fuse RoHS Description 481 Series alarm indicating fuses are designed to reduce down time by immediately pinpointing the blown (open) circuit while triggering an LED or audio alarm. This item requires 482 Series mating fuse holder. All ranges of 481 Series fuses are available as our original design, and the 2-20 amp range is now available as a RoHS compliant option (use the “P” designator when ordering).
PAGE 405
Special Application Fuses 481 Series Alarm Indicating Fuse Product Characteristics Body: Polyphenylene Sulfide (UL 94VO) Terminations: Beryllium Copper/Tin Plated Optional Lens: Nylon MIL-STD-202 Method 201 Dimensions Withstands 5 cycles of – 55OC to 125OC Insulation Resistance (After Opening) Greater than 10,000 ohms. Average Time Current Curves 22.9mm (.90") MIN. 17.8mm (.70") 21.3mm (0.84") REF. LENS 19.6mm (.77") 1000 11.7mm (.46") 16.9mm (.665") MAX. 100 2.77 (.109") 5.8mm (.
PAGE 406
Special Application Fuses 482 Series Fuseholders for Alarm Indicating Fuses 482 Series Fuseholders RoHS Description Ideal for telecommunications and control panel circuits, the 482 Series fuseholder is designed for use with Littelfuse 481 Alarm Indicating Fuses. Each holder is designed to accept other manufacturers’ replacement fuses as well. The fuseholder is available in three versions: PCB Mount - 15A: Can be soldered directly to a printed circuit board. Rated up to 15 amperes.
PAGE 407
Special Application Fuses 482 Series Fuseholders for Alarm Indicating Fuses Ordering Information 20A Panel Mount Fuseholder Type 1 Pole Holder Length * 6.40mm (.25”) 20A Panel Mount 0482 2001ZXPF * NOTE: 20 ampere version of 482 Series Panel Mount fuseholders come standard as a single pole unit with flush edges on both sides (no “keys” typical with 15A units). Please refer to the diagrams on the following page for additional information.
PAGE 408
Special Application Fuses 482 Series Fuseholders for Alarm Indicating Fuses Dimensions 15A Panel Mount Series: 15A PCB Mount Series: A 21.3mm (.84") TYP 6.4mm (.25") TYP (.84") TYP FEMALE & MALE LATCHING WITH TABS TYPICAL HOLDER ASSEMBLYA FEMALE LATCHING & FLUSH SIDE 21.3mm WITHOUT TABS A 6.4mm (.25") TYP 19.8mm (.78±.03”)FEMALE LATCHING & FLUSH SIDE TYP WITHOUT TABS FEMALE & MALE LATCHING WITH TABS AND NO MOUNTING HOLES TYPICAL HOLDER ASSEMBLY 1.6mm (.062") TYP 19.8mm (.78±.
PAGE 409
littelfuse.com circuitprotection@littelfuse.