Brochure

© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/03/17
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 219XA Series
Average Time Current Curves
0.001
0.01
0001001011.10
0.1
1
10
100
1000
10000
TIME IN SECONDS
CURRENT IN AMPERES
0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A
Temperature Re-rating Curve
Soldering Parameters - Wave Soldering
Dwell Time
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
0
10 20 30 40 50 60 70 80 90
100 110 120 130 140 150 160 170 180 190 200 210 220 230
240
Time (Seconds)
Temperature (°C) - Measured on bottom side of board
Cooling Time
Preheat Time
Wave Parameter Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum:
100
°C
Temperature Maximum:
150
°C
Preheat Time: 60-180 seconds
Solder Pot Temperature:
260
°C Maximum
Solder Dwell Time: 2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350°C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or
Convection Reflow process.
Recommended Process Parameters:
Note:
Rerating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
Packaging
Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width
219XA Series
Bulk N/A 1000 MXA N/A
Bulk N/A 1000 MXAE N/A
Reel and Tape EIA 296-E 1000 MRAET1 T1=53mm (2.087”)
Bulk N/A 1000 MXG N/A