Brochure

© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/03/17
Axial Lead & Cartridge Fuses
5×20 mm > Fast-Acting Fuse > 216SP Series
216SP Series, 5×20 mm, Fast-Acting Fuse
Features
Electrical Characteristics for Series
Applications
RoHS
Pb
5×20mm fast-acting ceramic body cartridge fuse Designed
to IEC specification
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
PS
E
Description
I
2
t test at 10x rated current
Electrical Characteristic Specifications by Item
Amp
Code
Amp
Rating
Voltage
Rating
Interrupting
Rating
Nominal
Resistance
Cold Ohms
(Ohms)
Nominal
Melting I
2
t
(A
2
sec)
Maximum
Voltage Drop at
Rated Current
(mV)
Maximum
Power
Dissapation at
1.5ln
(W)
Agency Approvals
PS
E
001 1 250
1500 A @
250 VAC
0.2370 0.18000 1000 2.5 x x x x x x x
01. 6 1. 6 250 0 . 1112 1.00500 600 4 x x x x x x x
002 2 250 0.0764 1.87000 500 4 x x x x x x x
02.5 2.5 250 0.0584 3.67200 400 4 x x x x x x x
3.15 3.15 250 0.0368 6.70000 350 4 x x x x x x x
004 4 250 0.0247 14.99500 300 4 x x x x x x x
005 5 250 0.0183 27.46000 250 4 x x x x x x x
06.3 6.3 250 0.0137 56.43000 200 4 x x x x x x x
008 8 250 0.0123 64.31500 200 4 x x x x x x
010 10 250 0.0079 154.34000 200 4 x x x x x x
Agency Approvals
Agency Ampere Range
PS
E
NBK080205-E10480B
NBK250702-E10480F
1A – 5A
6.3A – 10A
CQC10012049970 1A – 10A
SU05001-11001A
SU05001-11002A
1A – 2.5A
3.15A – 6.3A
E10480 1A – 10A
29862 1A – 10A
40013834 1 – 6.3A
J50248090 8A /10A
N/A 1A – 10A
% of Ampere
Rating
Ampere Rating Opening Time
210%
1A – 4A 30 minutes, Maximum
5A – 6.3A 30 minutes, Maximum
8A – 10A 30 minutes, Maximum
275%
1A – 4A 0.01 sec.., Min.; 2 sec. Max.
5A – 6.3A 0.01 sec.., Min.; 3 sec. Max.
8A – 10A 0.04 sec., Min.; 20 sec. Max.
400%
1A – 4A .003 sec., Min.; 0.3 sec. Max.
5A – 6.3A .003 sec., Min.; 0.3 sec. Max.
8A – 10A .01 sec.., Min.; 1.0 sec. Max.
1000%
1A – 4A .02 seconds, Maximum
5A – 6.3A .02 seconds, Maximum
8A – 10A .03 sec.onds, Maximum
Application testing is strongly recommended.
• Designed to International
(IEC ) Standards for use
globally
• High breaking capacity
• Meets the IEC 60127-2,
Sheet 1 specification for
Fast-Acting fuses
• RoHS compliant and
lead-free