Brochure

© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/03/17
Enclosed Fuseholders > Circuit Board Mounted
Cartridge Fuse Holders
RoHS
Pb
Product Characteristics
Dimensions
FOR 6.3×32MM FUSES
FOR 5×20MM FUSES
Fuse ca rrier inserted
Bayonet-joint
max. 0,2
5,5
45,7
ø 15
12,7
Printed circuit board
12,7
0,5
56,1
ø 2 -0,05
Stud
27,94
7,62
1,9
5
15
0,5
1,1
Holes in the printed circuit board:
80,5
7,62
27,94
Stud
1,0 + 2
1,3 +0,1
1,3 +0,1
17,8
2 +0,1
10
Holes in the printed circuit board: 1,3 +0,1
Stud
Fuse carrier inserted
Bayonet-joint
max. 0,2
45,7
Printed circuit board
5,5
56,1
2 -0,05
Stud
17,8
0,5
10 7,9
15
5,7
13,8
1,1 +0,1
0,5
Fuse carrier inserted
2,0 .xam
46,3
ø 12,7
∅ 15
Bayonet joint
6,0
3
5
5,08
1,1
Printed circuit board
12,7
7,21
Holes in the printed circuit board: 1,3 +0,1
7,62
4,45
1,0 + 3,1
80,5
ø15
0,5
,06
3
ø12,7
12,7
7,21
.xam 2,0
1,1
3,64
10
±0,1
5
Fuse carrier inserted
body
Printed circuit board
flange
10
±0,1
0+ 3,1,
Bayonet-joint
ø
2,9
7
Slot for screwdriver
max. 34
1,5
1,2
Cap 815
Bayonet-connector-nose
max. 33,8
Cap 816
Holes in the printed circuit board: 1,3 +0,1
810 Series Holder
811 Series Holder
813 Series Holder
814 Series Holder
815 Cap
816 Cap
810 Series 811 Series
813 Series
814 Series
815/816 Cap
810 Series 811 Series 813 Series 814 Series
Compatible
Fuse Types
5×20mm
6.3×32mm
5×20mm
6.3×32mm
5×20mm
6.3×32mm
5×20mm
6.3×32mm
Materials
Holder/Cap: Black Thermoplastic, UL94 V-0
Metal Parts: Copper alloy, corrosion protected
Terminals: Solderable, tinned
Electrical
Data (23ºC)
Rated Voltage: 250V
Rated Current: 6.3A (VDE) 16A (UL/CSA)
Rated Power:
2.5W (VDE)
RatedPower:
1.6W
(813+815 -
VDE) 2.5W
(813+816 -
VDE)
Rated Power:
2.5W
(813+816 -
VDE)
Mounting
(3) Solder
pins 0.5mm
× 1.1mm and
plastic stud.
The pins
spaced at
5.08mm form
a common
connection.
(4) Solder
pins 0.5mm
× 1.1mm
The pins
spaced at
5.08mm form
a common
connection.
(2) Solder
pins 0.5mm
× 1.1mm and
plastic stud
(2) Solder pins
0.5mm ×
1.1mm
Protection
Class &
Category
IP 40 (IEC 60529) PC2 (IEC 60127-6)
Operating
Temperature
-25 °C to 70 °C
Climatic Test -25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock
Conditions
+10ºC to +60ºC relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Vibration
Resistance
24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at
0.75mm amplitude 60 - 2000Hz at 10g acceleration
Contact
Resistance
≤ 5mΩ
Dielectric
Strength
> 1.5 kV
Impulse
Voltage
4 kV, 50 Hz, 1 min., dry
Insulation
Resistance
> 10
3
MΩ (500 VDC, 1 min.)
Solderability 235ºC, 3 sec. (Wave) 350ºC, 1 sec. (Soldering Iron)
Soldering
Heat
Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Min Cross
Section
Conducting path - 0.2mm
2
Marking
810, 250V,
Approvals
811, 250V,
Approvals
813, 250V,
Approvals
814, 250V,
Approvals
Unit Weight
5.4g(Holder)
/ 2.5g (Cap)
5.2g(Holder)
/ 2.5g (Cap)
5.8g (Holder)
/ 2.5g (Cap)
4.6g (Holder)
25g (Cap)
810/811/813/814 Series Circuit Board Mount Enclosed Fuse Holders
Agency approvals and ordering infornation is included on the next page.
Application testing is strongly recommended.