Brochure

© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/03/17
Enclosed Fuseholders > Circuit Board Mounted
Cartridge Fuse Holders
2,6
32,6
0,5
∅ 12,3
No. 653
1
3
4,3
10
Printed circuit board
Fuse carrier inserted
10 + 0,1
1,3 + 0,1
Holes in the printed circuit board: 1,3 + 0,1
Vertical / 2-Pin
Compatible Fuse Types 5×20mm
Materials
Holder/Cap: Black Thermoplastic, UL94 V-0
Sealing Washer: Thermoplastic (Cap 653 04
& 655 04)
Metal Parts: Copper alloy, corrosion
protected
Terminals: Solderable tinned
Electrical Data (23ºC)
Rated Voltage: 250V
Max. Current/Power: 6.3A (VDE)
16A (UL/CSA)
Rated Power: 2.5W (VDE)
Mounting (2) Solder pins 0.5mm×1.1mm
Protection Class &
Category
IP 40 (with Cap 653 07 & 655 07
acc. to IEC 60529)
IP 54 (with Cap 653 04 & 655 04
acc. to IEC 60529)
PC2 (IEC 60127-6)
Operating Temperature -25ºC to +70ºC
Climatic Test -25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock Conditions
+10ºC to +60ºC relative humidity
≤ 75% yearly average, without dew,
maximum value for 30 days - 95%
Vibration Resistance
24 cycles at 15 min. each
(IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 2000Hz at 10g acceleration
Contact Resistance ≤ 5mΩ
Dielectric Strength > 1.5 kV
Impulse Voltage 4 kV, 50 Hz, 1 min., dry
Insulation Resistance > 10
3
MΩ (500 VDC, 1 min.)
Solderability
235ºC, 3 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
Soldering Heat Resistance 260ºC, 5 sec. (IEC 60068-2-20)
Minimum Cross Section Conducting path - 0.2mm
2
Marking 652, 250V, Approvals
Unit Weight 3.8g (Holder) / 2.0g (653) / 2.4g (655)
RoHS
Pb
Product Characteristics
Dimensions
Not for new designs - refer to No. 852 and 853
FINGER GRIP TYPE
FLUSH MOUNT TYPE
653 Cap
655 Cap
652 Series Holder
652 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm Fuses
DESIGN 07: WITHOUT SILICON
WASHER (IP 40)
DESIGN 04: WITH SILICON
WASHER (IP 54) BETWEEN
HOLDER AND CAP
Ordering Information
Description Ordering
Number
Packaging
Cap, 5×20 mm, Flush Mount 653 0000 0705 Bulk 100
Cap, 5x25 mm, Finger Grip 655 0000 0705 Bulk 100
Cap, 5x20 mm, Flush Mount
Sealing Washer
653 0000 0405 Bulk 100
Cap, 5x25 mm, Finger Grip 655 0000 0405 Bulk 100
Holder Series 652 0000 0405 Bulk 100
Agency Approval
Agency Agency File Number
92599 (IP 40 Only)
E70164
47574
Specifications are subject to change without notice. Application testing is strongly recommended.
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
Additional Information
Datasheet
Samples
Resources