Brochure

© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/03/17
Enclosed Fuseholders > Panel Mounted
Cartridge Fuse Holders
800 01 Series Holder
815 Cap
816 Cap
FOR 6.3×32MM FUSES
FOR 5×20MM FUSES
RoHS
Pb
Product Characteristics
800 Series Holder
801/802 Series Holder
803 01 Series Holder
Series: 800 800 01 801/802 803 01
Compatible
Fuses
5×20mm
6.3×32mm
6.3×32mm
5×20mm
6.3×32mm
6.3×32mm
Materials
Holder/Cap: Black Thermoplastic, UL94 V-0
Clamp spring:
non-corrosion
metal, untreated
Metal Parts: Copper alloy, corrosion protected
Terminals: Solderable, tinned
Electrical
Data (23ºC)
Rated Voltage:
250V
Rated Voltage:
250V
Rated Voltage:
250V
Rated Voltage:
500V
Rated Current:
6.3A (800+815
- VDE)
10A (800+816
- VDE)
16A (UL/CSA)
Rated Current:
10A (800+816
- VDE)
16A (UL/CSA)
Rated Current:
6.3 A (VDE)
with cap 815
10 A (VDE) with
cap 816
Rated Current:
10 A (VDE) 16 A
(UL CSA)
Rated Power:
2.5W (VDE)
Rated Power:
4W (VDE)
Mounting
12.7mm diameter D-hole or double D-hole
Admissible torque on plastic hex nut is 1.2Nm
Pluggable with
clamping spring
in 12.7mm
diameter D-hole
(panel of 0.75mm
- 3 mm)
Terminals
Solderable or 4.8mm quick connect-fits 0.5mm tab
Protection
Category
IP 40 (IEC 60529) PC2 (IEC 60127-6)
Operating
Temperature
-25ºC to +70ºC
Climatic Test
-25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock
Conditions
+10ºC to +60ºC relative humidity ≤ 75% yearly average, without
dew, maximum value for 30 days - 95%
Vibration
Resistance
24 cycles at 15 min. each (IEC 60068-2-6) 10 -
60Hz at 0.75mm amplitude60 - 2000Hz at 10g
acceleration
NA
Contact
Resistance
≤ 5mΩ
Dielectric
Strength
> 1.5 kV
Impulse
Voltage
4 kV, 50 Hz, 1 min., dry
Insulation
Resistance
> 10
3
MΩ (500 VDC, 1 min.)
Solderability
235ºC, 3 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
235ºC, 2 sec.
(Wave)
350ºC, 1 sec.
(Soldering
Iron)
235ºC, 2 sec.
(Wave)
350 ºC, 3 sec.
(Soldering Iron)
Solder Heat
Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Min. Cross
Section
Conductor - 2.5mm
2
Marking
800, 250V,
Approvals
800 01, 250V,
Approvals
Series, 250V,
Approvals
803, 500V,
Approvals
Unit Weight
4.7g (Holder)
2.5g (Cap)
5.0g (801/802)
2.5g (815/816)
4.9g (803)
2.0g (816)
800/801/802/803 Series Panel Mount Enclosed Fuse Holders
Agency Approval
Agency Agency File Number
Agency
Approvals
122016 123336 120629 6914
121076
(802 only)
E70164 E70164 E70164 E70164
47574 47574 47574 47574
Additional Information
Datasheet
Samples
Resources
Datasheet
Samples
Resources
Datasheet
Samples
Resources
Datasheet
Samples
Resources
801 Series
801 Series
801 Series
800 Series
800 Series
800 Series
802 Series
802 Series
802 Series
803 Series
803 Series
803 Series
Ordering Information
Holders 800 0000 0005 800 0000 0105
801 0000 0005
802 0000 0005
803 0000 0105
Caps
For 5×20mm fuse: 815 0000 0005
For 6.3×32mm fuse 816 0000 0005
Packaging Bulk 100 Pcs all items listed above
Specifications are subject to change without notice. Application testing is strongly recommended.