Use and Care Manual

Construction Manual
© 2007 Little Cottage Co.
Page 8
Gambrel Barn Units - 8x8 through 12x24
46
41
With all OSB panels in place, locate the rake block.
Insert as shown above, using a angle square to
ensure that it is level with the OSB and trim. Secure
to wall using a 2½” screw. Repeat on opposite side.
42
Raise the rake and set in place underneath the OSB
sheeting and abutted against the 2X frame and rake
block.
43
Use an angle square to square the rake with the rake
block. Drive two (2) 2½” screws through rake and into
2X framing.
44
Repeat on the opposite end of rake. Then, attach the
rake on the opposite end of structure.
45
Secure ends of OSB to the rakes using 2½” screws.
Gambrel Barn Units- 8x8 through 16x24
®