Use and Care Manual

Construction Manual
© 2007 Little Cottage Co.
Page 10
Gambrel Barn Units - 8x8 through 12x24
53
Secure the dripedge with a 1¼” screw just before
the bend. Then, bend dripedge (along roof line) and
attach along the remaining roof. Complete on the
opposite end of structure.
54
Snap a chalk line along the OSB consistent with the
width of the starter strip. Consult the instructions
provided with your shingle package.
55
Align the top of starter shingles with the chalk line and
attach.
56
Add the second section of starter shingles. Then,
stagger the next rows of shingles as shown.
57
Continue to install shingles in a staggered manner.
1¼” screw just
before bend
58
Install shingles across the entire lower section of roof.
Gambrel Barn Units- 8x8 through 16x24
®