Instructions / Assembly

Wood Workshop
8’x10’ - 12’x24
Construction Manual © 2007 Little Cottage Co. Page 1
44
46
47
48
Fasten tursses from the outside, under-
neath the 2x6 and into the truss. Use one
2 1/2” screw on either side of the splice,
if truss rests on splice.
Install small rake block as shown.
Another picture of installation of rake
block.
Fasten rake together as shown. Keep
even on top and screw together.
Install rake as shown. Fasten rst piece of OSB per diagram
layout. Only fasten at the bottom to
begin with. Before fastening the top
you will need to make sure all the
measurements are correct. (make sure
trusses are not leaning to one side or the
other).