Installation&Asembly

Sara’s Victorian Mansion
Construction Manual © 2007-2008 Little Cottage Co. Page 8
43
44
45 46
47
48
Fasten at the front side.
Use 2.5” screws to pull panels together.
Do the same thing on the top. This will
draw these together and strengthen.
Do this same thing for panels K thru
N. Be sure to follow teh diagram and
install in the correct pattern. Otherwise
the gingerbread will not match as well.
Install panel O.
Leave 2.5” for the next wall. If this
does not match, check to amke sure
there are no extra gaps in the turret.