Use and Care Manual

A-Frame

Scaffolding

90˚ Staircase

Need additional help? Visit www.littlegiantladders.com or call Customer Care at 1-800-453-1192

Begin from the small A-frame position. Stand to one side of the ladder; unlock both Rock Locks

on one outer section. When extending the ladder your hands must always be on the outside of

the outer section. Place one hand on the palm button and push the inner section away from you

to extend the height. Once you have reached the desired height; line up the inner ladder and the

outer ladder rungs, place your hand under the rungs then lock both Rock Locks.

Next, unlock the Rock Locks on the opposite outer section. Place one hand on the palm button

and push up on the inner section to extend the height. Once you have reached the desired

height; line up the inner ladder and the outer ladder rungs, place your hand under the rungs then

lock both Rock Locks.

From the tall A-frame position reduce

the height on one side of the ladder by

one foot. Make sure the ladder is on a

flat level surface and the short side of

the ladder is against a secure wall.

Start from the small A-frame

position, lengthen the down

side of the ladder to the desired

height. Ensure the ladder rungs

are level before using.

Remove the outer sections. Attach the trestle brackets

(sold separately). Insert the plank at desired height.

Do not stand on the plank above 3 feet. Never use either

trestle as a stepladder.

One Ladder Does It All