Product Manual
f) Pressure Gauge:
Air Volume Control:
Pressure Relief Valve:
devices.
OPERATION
WARNING: DO NOT RUN THE PUMP BEFORE PRIMING IT, SINCE THE
SEAL AND IMPELLER COULD BE PERMANENTLY DAMAGED.
PRIMING:
Note:
Using an inline check valve:
Using a foot valve:
SINGLE PIPE INSTALLATION
Note:
leaks.
DOUBLE PIPE INSTALLATION
DRAINING:
2
L2
Fig. 2 Electrical Connections
Motor (Load)
TABLE 1 - PERFORMANCE
HP INJECTOR
DEPTH (IN FEET)
MINIMUM
PSI
INJECTOR
SETTINGS
5 10 15 20 25 20 30 40 50 60 70 80 90
CAPACITY (IN GALLONS PER MINUTE @ 30 PSI DISCHARGE)
SINGLE PIPE SHALLOW WELL
INSTALLATION
DOUBLE PIPE DEEP WELL
INSTALLATION
25
5.8 25
25
5.3 3.5 25
8.8
25
7.2 5.3 25
TABLE 2 – MAXIMUM WIRE LENGTH (FT.)
Based on an approximate 3% voltage drop.
MOTOR WIRE GAUGE (AWG)
HP Volts 0-25 ft. 50 ft. 100 ft. 150 ft. 200 ft.
8
8 8
8