User Manual

2
INCLUDED HARDWARE
Phillips Screwdriver
REQUIRED TOOLS FOR ASSEMBLY
(NOT INCLUDED)
Safety Goggles
T1 x 8 (for K, M1/M2)
T2 x 1 (for E)
T3 x 1 +
N2 x 1 + x 1 (for D)
T4 x 1 (for S)
T5 x 2 (for O)
T6 x 2 (for C)
T7 x 2 + N1 x 2 (for B)
T8 x 6 (for G, S & Q)
T9 x 2 (for Q lower)
15
POSITION 5 - TRIKE
Remove seat cover
and sun shade
Push seat belts through the openings on the seat cushion. Undo
the clip under the seat and remove seat belt.
Remove seat back
Lock both rear brakes
when parked.
1
2
3
4
5
Pull down seat lock lever on trike frame (A). Then, slide the seat to the
desired position. Press the seat lock lever up to lock the seat in place.
A
seat lock
lever
Remove handle with tray. Then, close the cap on the frame (A).
Replace handle lock (H) onto the frame or store in a safe place for future use.
A
engage pedals
disengage pedals
ENGAGE PEDALS FOR POSITION 5
H
Push in button. Then, slide to move. Rotate the
front pedal if the button does not fully slide.