Instruction Manual

Hanging Frames and Mirrors 2021
How to install your mirror or frame
General Installation
Assembly should be carried out by a qualified person, because
wrong assembly may lead to that the furniture will fall and cause
injury or damage.
Fastening devices for the wall are not included since different
wall materials require different types of fastening devices.
Use fastening devices suitable for the walls in your home. Assess
the suitability of the wall to ensure that the fastening devices will
withstand the forces generated. For advice on suitable fastening
devices, contact your local hardware store.
Never use wire, string, or chains to hang a mirror or frame
This puts additional forces on the frame and could cause it to break.
Common Hardware for installation
For advice on suitable fastening devices, contact your local hardware store.
Plaster Board Brick Solid Timber Wall
Cavity Fixing Wall Plug
For use when fitting or
supporting heavy loads such as
shelving, wall cabinets, coat
racks, large frames, or mirrors
Standard Wall Plug
These come in various sizes and
are made from plastic or
sometimes wood fibre.
Wood Screw
This shall only be use if going into
a solid timber surface, such as a
support beam or plywood.
Safety
• When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that
the screws and wall plugs being used are suitable for supporting your unit.
•
General Rule Always use a larger screw and wall plug if you are not sure.
• Always check the mirror periodically to ensure no fittings have become loose.
• It is recommended that at least two people hang a large and heavy mirror.
Cleaning
• Do not use any abrasive substance to clean the glass.
• Wipe clean with a damp cloth. Use only water or glass cleaner.
• Wipe dry with a clean cloth.