Instructions / Assembly

www.ihomeangel.com Page: - 2 - / 3
TOOLS REQUIRED (NOT INCLUDED):
Befo
re doing assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(E) Mounting plate (1)
(F) Green ground screw (1)
(G) Back plate (1)
(H) Knob nut (2)
(I) Socket (3)
(J) Screw (9)
(K) Wire lampshade (3)
ACCESSORIES & QTY ENCLOSED:
(A) Plastic wire connector (3)
(B) Anchor (4)
(C) Mounting screw (2)
(D) Wood screw (4)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the above
illustration.
2. Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the electricity until the work is
done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position.
B). Place the wall switch in the “OFF” position.
3. Make installation
[phone] Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST
[e-mail]
(J) Screw (1) spare parts