Installation Guide

[phone] Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [e-mail]
www.ihomeangel.com Page: - 2 - / 3
PARTS TYPE & QTY INCLUDING:
(B) Mounting plate (1)
(C)Green ground screw (1)
(E) Stud (4)
(F) Back plate (1)
(G) Socket cap (4)
(H) Glass ( 4 )
ACCESSORIES & QTY ENCLOSED:
(A)Plastic wire connector (3)
(D) Mounting screw (2)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the above
illustration.
2. Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the electricity until the work is
done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position.
B). Place the wall switch in the “OFF”position.
3. 1) Gently unscrew the studs (E) from back plate (F) by screwdriver
2) Carefully remove the mounting plate (B) from back plate (F)
4. 1) Carefully pull the wires from outlet box through mounting plate (B)
2) Attach the mounting plate (B) to outlet box with mounting screws (D)