Installation Guide

[phone] Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [e-mail]
www.ihomeangel.com Page: - 3 - / 3
5. Make wire connections
Connect wires as below wires connecting shown. TAKE NOTE OF YOUR WIRE COLOR OF FIXTURE ,NEVER CONNECT
WIRE TO GROUND WIRE
Connect ground wire according to below chart Connect wires according to below chart
Twist plastic wire connector until wires are tightly joined together,wrap each connector with approved
electrical tape.Be sure that no wire strands are exposed and then carefully tuck all wires into the outlet box .
6.Gently push the fixture to wall, and carefully adjust the fixture
to make the holes on back plate (F) and mounting plate (B)are to be
aligned ,then thread the screws（E）to secure the fixture in
place by screwdriver.
7. 1) Install bulb (not included) (Please do not exceed
the maximum capacity recommended on the socket.)
2) Carefully position glasses on socket caps
8. Check everything installed properly, then you could turn on the light. Enjoy !
CLEANING
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as
scouring pads or powders, steel wool or abrasive paper.
ORDERING PARTS
Keep this sheet for future reference, and in case you need to order replacement parts. All parts for this fixture
can be ordered from place of purchase. Be sure to use exact wording from illustration when ordering parts.