Installation Guide

[phone] Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [e-mail]
www.ihomeangel.com Page: - 3 - / 3
Step 3: Make wire connections
Connect wires as below wires connecting shown. TAKE NOTE OF YOUR WIRE COLOR OF FIXTURE ,NEVER CONNECT
WIRE TO GROUND WIRE
Connect ground wire according to below chart Connect wires according to below chart
Twist plastic wire connector until wires are tightly joined together,wrap each connector with approved electrical tape and carefully
tuck all wires into the outlet box.
Step 4: Align the holes in the backplate (G) with the
mounting screws, then attach the backplate (G)
using the previously removed ball nuts(H)
Step 5: Install bulbs (Not included. Please do not
exceed the maximum capacity recommended
on the socket.)
4. Check everything already is installed properly, then you could turn on the light. Enjoy!
CLEANING
To clean, wipe fixture with a soft cloth. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive
paper.
ORDERING PARTS
Keep this sheet for future reference, and in case you need to order replacement parts. All parts for this fixture can be ordered from
place of purchase. Be sure to use exact wording from illustration when ordering parts.