Operation Manual

4a. Turn the engine switch to the START until the engine has started. Then you

can turn the engine switch to the ON position (Fig. 9a).

NOTE:

Do not use the choke when the engine is warm or the air temperature is high.

Manual start: (only 75034 and 75035)

4b. Pull the starter grip until resistence is felt, then pull the starter grip briskly

toward the arrow (Fig. 9b).

CAUTION: Do not allow the starter grip to snap back. Return it slowly by hand.

5. Move the choke lever to the OPEN position as the engine warms up.

NOTE

If the engine stops and will not restart, check the engine oil level before

troubelshooting in other areas.