Submittal Sheet

COPPER-FIN GAS BOILERS (MODELS CB 315 - 500)
COPPER-FIN
®
BOILER
Submittal Sheet
CBA-Sub-06
JOB NAME ______________________________________________________________________
LOCATION ______________________________________________________________________
ARCH./ENGR.____________________________________________________________________
MECH. CONTRACTOR ___________________________________________________________
MODEL NO. _____________________________________________________________________
TYPE GAS ______________________________________________________________________
Btu/hr INPUT_______________________________Btu/hr OUTPUT_______________________
NOTES
Standard Features
• 84% A.F.U.E.
ASME Copper Finned Tube Heat Exchanger
• Gasketless Heat Exchanger Design
• 82% Thermal Efficiency
ASME Copper Finned Tube Heat Exchanger
• Gasketless Heat Exchanger Design
• Two Stage Intermittent Electronic Ignition
• 160 PSI Working Pressure
• Pump Relay
• Diagnostic Flash Codes
• Two Stage Solid State Temperature Control
• Two Stage Gas Valve with Built-In
Manual Shut-Off
Automatic Reset High Limit
ASME Pressure Relief Valve
• Temperature & Pressure Gauge
• Built-In Draft Diverter
• CSA Design Certified for Alcove Installation
• CSA Design Certified for Installation
on Combustible Floor
• Stainless Steel Burners
• Loch-Heat Ceramic Tile Combustion Chamber
• 24 Volt Control System
• 10 Year Limited Warranty on Heat Exchanger
(See warranty for details)
Optional Equipment
Place an X in the box by all options that apply
Adjustable High Limit w/ Manual Reset
Contacts on any Failure
Contacts for Air Louvers
Flow Switch
Outdoor Air Reset Control
Low Water Cut-Off
Multi-Stack Frame
Pump Delay/Freeze Protection
MP
2
Sequencer
Low Temperature Valve
Firing Controls
M9 - Two-Stage Intermittent Spark Ignition (Standard)
M13 - GE GAP/FM/IRI
M7 - California Code

Summary of content (2 pages)