Brochure

96
% Efficiency – FOR LIFE.
Fully Modulating Burner with 5:1 Turndown
SHIELD can fire as low as 20% of maximum input when water heating demand is lowest, and increase to
100% for peak-demand periods. This results in better overall efficiency and less cycling compared to
“on-off ” tank-type units that can only fire at 100%.
‘Neg/Reg’ Sealed Combustion Technology
SHIELD utilizes an advanced combustion system which provides NOx ratings compatible with the
most stringent air quality standards. Additionally, the NEG/REG sealed combustion technology
allows the unit to operate with inlet gas pressure as low as 4 inches water column.
The SHIELD
™
commercial water heater delivers best-in-class
innovation from Lochinvar. It operates at 96% thermal
efficiency, with inputs up to 500,000 Btu/hr, and provides
a 100% effective defense against a water heater’s worst
enemy—lime scale buildup inside the tank.
SHIELD uses the industry’s most advanced stainless steel
heat transfer system. Sealed combustion technology
delivers a quiet and environmentally friendly supply of heat
to the system. Plus, with drawdown capacity as much as
15% higher than typical tank-type heaters, you get more
usable hot water than any other competing models.
The result is quiet, long-lasting green performance…life cycle
efficiency that keeps saving money, year after year.
Long-Lasting Life Cycle Efficiency
High-efficiency tank-type water heaters have one thing that
SHIELD does not, energy-robbing lime scale buildup.
This insulates the water from the heat source, decreasing
thermal efficiency, which increases operating costs.
Additionally, the rate of scaling increases with temperature
and usage. Just a ¼" of lime scale buildup will cause
increased fuel consumption and raise operating costs as
much as 25%. Lime scale buildup also requires periodic
acid washes in the tank that will simply result in a shorter
useful life of the equipment.
Because SHIELD has no flue tubes inside the tank, the impact
of lime scale is eliminated, ensuring high efficiency and low
operating costs throughout its life cycle. The chart below
illustrates SHIELD’s consistent “life cycle efficiency”
compared to both standard and high-efficiency tank-type
units which utilize flue tubes for heat transfer.
ciency
FOR LIFE
ciency
–
FOR LIF
TM
Y
Yea
rs of
Ope
rat
io
on
%
% E
ffi
cie
e
ncy ov
er
r
Heater
L
Li
fe
Efficiency Loss Due to Lime Scale Buildup
SHIELD
S
SH
H
IELD
High-
Efficiency
Tank Types
Standard
Tank Types
Ope
O
at
ra
ing
Ef
E
fic
en
ie
cy
“In
n
-t
-ta
nk” flue tubes
and
nd
h
hea
t exch
ang
g
ers suffer
from l
ime
me
scale
bu
bu
ild
up
beg
in
nn
ing from the
fi
f
rst
hou
r
rs
of
ope
e
ration.