SDS

IDH number: 1936538
Product name: Loctite 2in1 Tub and Tile Adhesive Caulk
Page 3 of 7
7. HANDLING AND STORAGE
Handling:
Avoid contact with eyes. Avoid prolonged or repeated skin contact with this
material. Use only with adequate ventilation. Wash hands before breaks and
immediately after handling the product. Keep out of the reach of children.
Storage:
Keep from freezing.
For information on product shelf life, please review labels on container or check the Technical Data Sheet.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure
controls and protective equipment for each task performed.
Hazardous Component(s)
ACGIH TLV
OSHA PEL
AIHA WEEL
OTHER
Ethylene glycol
100 mg/m3 Ceiling
Aerosol.
None
None
None
Titanium dioxide
10 mg/m3 TWA
15 mg/m3 PEL Total
dust.
None
None
Acetone
750 ppm STEL
500 ppm TWA
1,000 ppm (2,400
mg/m3) PEL
None
None
n-Butyl acetate
150 ppm TWA
200 ppm STEL
150 ppm (710
mg/m3) PEL
None
None
Quartz (SiO2)
0.025 mg/m3 TWA
Respirable fraction.
2.4 MPPCF TWA
Respirable.
0.1 mg/m3 TWA
Respirable.
0.3 mg/m3 TWA Total
dust.
None
None
Engineering controls:
Provide local and general exhaust ventilation to effectively remove and
prevent buildup of any vapors or mists generated from the handling of this
product.
Respiratory protection:
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or
vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Eye/face protection:
Safety goggles or safety glasses with side shields.
Skin protection:
Use impermeable gloves and protective clothing as necessary to prevent skin
contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
Paste
Color:
White
Odor:
Acetate
Odor threshold:
Not available.
pH:
6.5 - 7.5
Vapor pressure:
17.5 mbar (20 °C (68°F)) no method
Boiling point/range:
> 100 °C (> 212°F)
Melting point/ range:
Not available.
Specific gravity:
1.3
Vapor density:
Heavier than air, (Air = 1)
Flash point:
174 °F (78.89 °C) Pensky Martens closed cup
Flammable/Explosive limits - lower:
Not available.
Flammable/Explosive limits - upper:
Not available.
Autoignition temperature:
Not available.
Evaporation rate:
0.3 (Butyl acetate = 1)
Solubility in water:
Soluble
Partition coefficient (n-octanol/water):
Not available.
VOC content:
1.15 %; 152 g/l (by weight, calculated using CARB method; g/L less water,
less exempts calculated using SCAQMD method)