MSDS

ManualsBrandsLoctite ManualsPaint0.6 fl. oz. Fast Curing Wood Bonder (6-Pack)

Material Safety Data Sheet

Revision Number: 001.0

Issue date: 08/23/2011

IDH number: 1361024 Product name: Loctite® Quick Dry Wood Bonder

Page 1 of 1

1. PRODUCT AND COMPANY IDENTIFICATION

Product name: Loctite® Quick Dry Wood Bonder

IDH number: 1361024

Product type: Wood adhesives

Region: United States

Company address: Contact information:

Henkel Corporation

One Henkel Way

Rocky Hill, Connecticut 06067

Telephone: 800.624.7767

MEDICAL EMERGENCY Phone: Poison Control Center

1-877-671-4608 (toll free) or 1-303-592-1711

TRANSPORT EMERGENCY Phone: CHEMTREC

1-800-424-9300 (toll free) or 1-703-527-3887

2. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

HMIS:

Physical state: Liquid HEALTH: *2

Color: Light amber FLAMMABILITY: 1

Odor: Slight PHYSICAL HAZARD: 1

Personal Protection: Not available.

WARNING: MAY CAUSE ALLERGIC SKIN AND RESPIRATORY REACTION.

CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION.

HARMFUL IF INHALED.

Relevant routes of exposure: Eyes, Inhalation, Skin

Potential Health Effects

Inhalation: May cause sensitization by inhalation and skin contact. Moderate respiratory tract irritation.

Exposure to diisocyanates may cause the following human health effects: Skin irritation and

allergic reactions, respiratory irritation, respiratory sensitization and lung toxicity; some

diisocyanates also may cause cancer. The likelihood that these effects will occur depends on a

number of factors; among them the level of exposure, frequency of exposure, part of body

exposed and sensitivity of the exposed individual. Persons suffering from allergic reactions to

isocyanates should avoid contact with the product.

Skin contact: Contact with skin can cause irritation and allergic reaction (sensitization) in some individuals.

This product may discolor the skin.

Eye contact: Causes eye irritation.

Ingestion: Do not taste or swallow.

Existing conditions aggravated by

exposure:

Pre-existing skin or lung allergies may increase the chance of developing exaggerated allergic

symptoms from exposure to this product.

This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR

1910.1200).

See Section 11 for additional toxicological information.

3. COMPOSITION / INFORMATION ON INGREDIENTS

Hazardous components CAS NUMBER %

2,2'-dimorpholinyldiethyl ether 6425-39-4 5 - 10

Methylenebis(phenylisocyanate) 101-68-8 30 - 60

Summary of content (5 pages)

PAGE 1
Material Safety Data Sheet Revision Number: 001.0 Issue date: 08/23/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: Loctite® Quick Dry Wood Bonder Wood adhesives IDH number: 1361024 Region: United States Contact information: Telephone: 800.624.
PAGE 2
4. FIRST AID MEASURES Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Skin contact: Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention. Remove contaminated clothes. Eye contact: In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention. Ingestion: Do not induce vomiting, seek medical advice immediately.
PAGE 3
Hazardous components ACGIH TLV OSHA PEL AIHA WEEL OTHER None None 0.02 ppm (0.2 mg/m3) Ceiling None None None None 2,2'-dimorpholinyldiethyl ether Methylenebis(phenylisocyanate) 0.005 ppm TWA Engineering controls: Use local ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits. Respiratory protection: In such cases, or whenever concentrations of MDI exceed the TLV, respiratory protection must be worn.
PAGE 4
Hazardous components Health Effects/Target Organs 2,2'-dimorpholinyldiethyl ether Methylenebis(phenylisocyanate) No Records Irritant, Respiratory, Allergen 12. ECOLOGICAL INFORMATION Ecological information: Not available. 13. DISPOSAL CONSIDERATIONS Information provided is for unused product only. Recommended method of disposal: Follow all local, state, federal and provincial regulations for disposal.
PAGE 5
16. OTHER INFORMATION This material safety data sheet contains changes from the previous version in sections: New Material Safety Data Sheet format. Prepared by: Karim Nasr, Regulatory Affairs Specialist DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation does not assume responsibility for any results obtained by persons over whose methods Henkel Corporation has no control.