User's Manual

Setting the Alarm and Wake-up Mode

1. Press ALARMS repeatedly to toggle between <Alarm 1 Setup> and <Alarm 2 Setup>.

and

will flash on the display. Press SELECT to confirm.

2. Press to select alarm<On> or <Off>, then press SELECT to confirm.

3. Press to adjust the alarm time, then press SELECT to confirm.

4. Press to select alarm duration (15/30/45/60/90 minutes), then press SELECT to confirm.

5. Press to select Buzzer, DAB or FM mode, then press SELECT to confirm.

6. Press to select alarm active day (Daily / Once / Weekends / Weekdays), then press

SELECT to confirm.

7. Press to select alarm volume, then press SELECT to confirm.

Snooze Function

• When the alarm sounds, press SNOOZE to temporarily switch off the alarm. The alarm

switch off time will vary according to the selected alarm duration. Press SNOOZE repeatedly

to select the alarm switch off time.

Alarm Duration Alarm Switch Off Time

15 minutes 5 or 10 minutes

30 minutes 5, 10 or 15 minutes

45 / 60 /90 minutes 5, 10, 15 or 30 minutes

The LCD display will show “Snooze mm:ss” to indicate that snooze is on.

• Turn off the alarm by pressing STANDBY.

Sleep Function

This function allows you to programme the unit to switch off by itself after a set sleep time. Make

sure the radio is switched on before setting the sleep time.

1. To activate the sleep function, press SLEEP repeatedly. The sleep time will toggle as the

sequence below on every press:

Sleep Off

9060453015

2. Press SELECT to confirm. “ ” will show on the LCD display.

3. When the sleep timer reaches zero, the radio will turn off. To turn the sleep function off

while the sleep timer is still counting down, press SLEEP` repeatedly to select “Sleep Off”. “

” will disappear from the LCD display.

L1CRDAB13E_IB_130128_Michelle.indb 11 28/1/13 12:20 PM