User's Manual

DAB Operation

If the unit is connected to the mains power and

switched on from standby for the first time, the unit will

automatically enter into DAB mode and perform the auto

scan function. During the scan the LCD display will show

“Scanning …” together with a slide bar that indicates the

progress of the scan and the amount of stations that have

been found so far.

Once the scan has finished, the unit will broadcast the

first alphanumerically found station. To explore the found

stations, press . When you find a station that you

would like to listen to, press SELECT.

DAB Auto Scan

The auto scan will search for the entire DAB Band channels. After the scan has finished, the first

alphanumerically found station will be automatically boardcast.

1. To activate auto scan, press and hold MODE/MENU to

display the menu. Press to select “Full scan“, then

press SELECT to confirm. The display will show “Scanning

…” and a slide bar that indicates the progress of the scan.

2. All the stations that have been found will be stored

automatically. To explore the found stations, press .

Press SELECT to confirm.

Full auto scan will not replace the DAB stations in the memory. If you want to remove

all the previously scanned stations, you will need to reset the system.

Secondary Services

You may see a “ ” symbol after the name of the station during tuning, this indicates that there

are secondary services available to that station. These secondary services contain extra services

that are related to the primary station, e.g. a sports station may want to add extra commentaries.

The secondary services are inserted directly after the primary station in the station list.

To select the secondary station, press until the desired secondary station is displayed, then

press SELECT. When the secondary service ends, the unit will automatically switch back to the

primary station.

12 00

Scanning... 19

DAB

12 00

DAB

Full Scan< >

L1CRDAB13E_IB_130128_Michelle.indb 13 28/1/13 12:20 PM