Owner's manual

INS0100 Rev. 07/03/14

Page 6

Fig. 11

For shifters manufactured 1994 and earlier, please contact Lokar for assistance.

To Remove Shifter Knob:

Step 1: Make sure the shifter is all the way forward in the Park position.

Step 2: Loosen the jam nut below the shifter knob. DO NOT loosen or remove

the set screw that is in the knob. Fig. 12

Step 3: Turn the shifter knob counter-clockwise to remove.

Lokar Shifter Knob Removal Instructions

(For Shifters Manufactured 1995 and Later)

Release

Button

Shifter

Knob

Shifter

Lever

DO NOT

REMOVE

Set Screw

Jam Nut

To Install Shifter Knob:

Step 1: Make sure the jam nut is still in place on the shifter lever.

Step 2: Screw the shifter knob onto the shifter lever until the release button

comes up flush with the top of the shifter knob.

Step 3: Tighten the jam nut up against the bottom of the shifter knob.

Step 4: Check to make sure that depressing the release button allows the

shifter lever to be moved, and that the shifter lever still locks in Park

and Neutral. If the shifter will not come out of “PARK” with the release

button fully depressed, tighten the knob one turn and check it again.

If the shifter does not lock in “PARK”, loosen the knob one turn and

check it again.

Fig. 12

Aluminum

Adjuster Plug

Shifter in

Reverse Position