User`s manual

Configuration

There are two separate methods for configuring this

Device Server for use. In the first section of this

chapter, the Command line Interface (CLI) or Menu-

driven interface via the Console Port to set the device

IP and TCP configuration to monitor/managed the

attached serial device via Serial IP Redirector

software. The second section will describe CLI or

Menu-driven via Telnet configuration. Firstly, make the

connection below:

DIP Switch 1 set to ‘ON’ position

Console Port Access

The Device Server is accessible via a terminal

emulator attached to the RS-232 console port. Please

follow the step below.

1. Attaching the serial cable to COM port of

computer and serial port of device server.

2. Select Hyper Terminal from (start menu

Æprograms Æ Accessories Æ communication) a

Device

Female

Com

ute

RS-232 Cable