User`s manual

window will appear, assign the connection name.

Then select the correct available COM port

(COM1 or COM2). After this enter the port

settings as below.

Bits per seconds: 38400

Data bits: 8

Parity: None

Stop bits: 1

Flow Control: None

3. Once connection is established, you will see a log

in screen.

4. Press ENTER and on the following screen, type

the default username admin, leave the password

field blank since there is no default value and

press ENTER to proceed.

5. Select either CLI User Interface or Menu-driven

Interface option by using the associated number