User`s manual

Telnet Access

The Device Server is accessible via a Telnet. At the

command prompt type telnet 192.168.0.254 (If

connecting with default IP). You will be prompted to

Enter user name and password as mentioned and

shown in the topic Console Port Access. Use CLI or

Menu-driven interface to perform the changes.

NOTE:

The only limitation of Telnet Access is that users can not assign

new IP address to device server. Please use Console Port Access

or Web Access to assign new IP address.

Web Access

The Device Server is accessible via a web browser

once connected to the network. Type the IP address

at web browser 192.168.0.254 (if connecting with

default IP). A window will be prompted to Enter user

name and password.