User`s manual

33
Use the <Tab> and <Enter> keys as previously. Enter
the IP address of computers for when abnormalities
on a connection occur and an alarm to be sent. Enter
their community names and disable or enable their
alarm function accordingly. See descriptions below:
Parameter Description
Index
Status
IP Address
Community
Number assigned to each trap
Disable or enable their alarm function accordingly
Enter the IP address of computers for when
abnormalities on a connection occur and an alarm to
be sent. Enter their community names and disable
or enable their alarm function accordingly
Enter their community names
You can use an external SNMP-based application to
configure and manage the Device Server. This
management method requires the SNMP agent on the
Device Server and the SNMP Network Management
Station to use the same community string. This
management method, in fact, uses two community
strings: the get community string and the set
community string. If the SNMP Network Management
Station only knows the set community string, it can
read and write to the MIBs. However, if it only knows
the get community string, it can only read MIBs. The
default get and set community strings for the
Device Server are public.