User`s manual

42
Byte Counts to Network: Displaying the number of
bytes received to TCP/IP network.
Byte Counts From Network: Displaying the number
of bytes transmitted from Network.
Byte Counts to UART: Displaying the number of
bytes received to serial device.
Mgmt. Configuration
This category offers multiple management options.
User Config.
This option will allow user to change the “username”
and “user password” for the device server
management.
Type the new user name in the “User Name” and
password to “User Password”. Selecting Apply will
implement the new user name and password, which
will be required to manage the device server.
Warning
It is recommended to keep a written record in a safe
place for the User Name and Password. In case, you
lost the both or either one, you need to reset the system
to default setting. This can be done by pressing a button
at S1 location of PCB (near to capacitor) after removing
the casing.