Installation & Assembly

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 30 minutes.

1.Attach the Socket Assembly(K) onto the bottom loop of the Body Frame(G) with closable link.

2.Screw the Chain(E) to the Hanging Loop(C) and the fixture loop with Closable link/cap(F).

3.Insert the fixture wires through the fixture loop of Body Frame(G), Chain(E),Hanging Loop(C) and Canopy(B).

Turn the Fixture Loop(G) clockwise till tight.

4.Sepetate the Mounting Plate(A) from the Canopy (B) by unscrewing the Canopy Nut(D)anti-clockwise.

Connect, Hot, Black or Red Outlet Supply Wire to:

Connect, Neutral, White Outlet Supply Wire to:

Black

White

* Parallel Cord (round & smooth)

* Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored

stripes)

Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor

Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped

and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

5.Fix the Mounting Plate(A) to the junction box with Mounting Screw (H).

6.Attach the Canopy(B) to the junction box and fix it by turning the Canopy Nut (D) clockwise.

7. Insert the bulb (J) into the Socket as diagram. Be sure to use light bulb(J) with wattage no greater

than specified on this fixture. Make sure that electrical current is turned off before changing bulbs.

PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT

THERE ARE 4 X 4W LED BULBS IN THE BOX.

ENJOY YOUR LAMP

2/2