Installation Guide

Table Of Contents

Nstallation and commissioning

1. Open the angle valve

Remove debris from the tank duct

(Kind reminder: When opening for the first time, the angle valve

handle has a large torque)

2. Power connection

Insert the power cord leakage protection plug into the power

socket and press the reset switch. The plug indicator light is on,

indicating that the power is turned on.

reminder:

Press the leakage test button before use, and the reset switch

will pop up to indicate leakage

The protection function is normal.

Press the TEST button (then press the RESET button) to ensure

normal operation every month

3. Self inspection

1. The host buzzer beeps and the display screen flashes; If the

red light is on again, start the self check.

2. The host buzzer beeped again, completing the self check.

3. Normal use in startup function mode.